Find Verified Hard Anodizing Rectifier Suppliers, Manufacturers and Wholesalers

ITO GLOBAL GRUOP, Sale Offer Carbon anode FC 90% -96% , clean , containers will be loaded full capacity. Our monthly supplying capacity 1000 ton 1-Carbon-95-97-% 2-Sulphur-0.95-% 3-Ash Content-1-% 4-V-M 0.30-% 5-Moisure 0.90-%

For smelters that produce Carbon Anodes, Gremlog provides spent Anodes (Anode Butts) from a variety of smelters with different qualities. Those Anode Butts can be used again as raw material for the production of Anodes. We have a variety of different sizes including : 0-1mm/ 1-4mm/ 4-10mm/ 10-30mm/ 30-50mm/ 50-100mm/ 100-500mm / 100-1200 mm / As per request Carbon Anode FC: 93-96 %

We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.

We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.

Carbon anode FC 90% -96% , clean , containers will be loaded full capacity

We put forward a high quality of assortment of Nickel which is available in many forms including LME registered and non registered cathodes, cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder, flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods. Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile, somewhat ferromagnetic, and a fair conductor of heat and electricity

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

A unique product of Aluminum briquettes made from aluminum turning Aluminum contain 90% above.

Clove Leaf Oil Contains the least amount of total eugenol compared to buds ot stems, and has very small quantities of eugenyl acetate. Eugenia Caryophyllus (Clove) Leaf Oil / 85% / 85% / Huile de feuille de girofle rectifie (85% eugnol) / Aceite esencial de hoja de clavo redestilado (85% Eugenol) / Minyak Daun Cengkeh Rektifikasi 85% Olfactive Profile : Spicy, earthy, warm, woody, eugenol-like CAS No : 84961-50-2 ; 8000-34-8 EC No : 284-638-7 FEMA No : 2325 Product Synonyms : Redistilled, flash, clear, pale yellow, Girofle, minyak daun cengkeh

Vetiveria Zizanioides (Vetiver) Root Oil / / Huile essentielle de vtiver Java - Rectifie / Aceite Esencial de Vetiver de Java - Rectificado / Minyak Akar Wangi Jawa Rektifikasi ex-Chrysopogon zizanioides, syn. vetiveria zizanioides Olfactive Profile : Woody, smoky, earthy, herbaceous and spicy, sweet, caramel CAS No 84238-29-9 ; 8016-96-4 EC No 282-490-8 Product Synonyms : rectified, redistilled, light, minyak akar wangi, khus oil, kush, khusimol, root oil, vetiverol, akar, smokey, haiti Vetiver is a parennial grass that shares a lot of its characteristics with other fragrant grasses like lemongrass, citronella and palmarosa. However unlike these plants, vetiver oil is extracted from the plant's roots rather than its leaves While Vetiver Oil is mainly used in fine fragrances, the Indonesian Vetiver is widely used for making derivatives such as Vetiverol and Vetiveryl Acetate

Van Aroma is one of the leading producers of Clove Leaf Oil Rectified 80%. Van Aroma is one of the biggest exporters in Indonesia. We produce and export Clove Leaf Oil Rectified 80% from sustainable, and fully traceable sources. Huile Essentielle de Feuille de Girofle Rectified 80% / Aceite esencial de Hoja de Trebol Rectificado 80% / Minyak Daun Cengkeh Rektifikasi 80% Olfactive Product: Spicy, earthy, warm, woody CAS No: 84961-50-2 ; 8000-34-8 EC No: 284-638-7 FEMA No: 2325 Product Synonyms: minyak daun cengkeh, redistilled, clear, fractionated, flash

Burning Time: 5 - 7 hours Moisture: 6-8 % Fixed Carbon: 85% Calorific Value: 6500 to 7000 Kcal/kg Ash Content: 1.5-2 % Volatile Matter: 12.5 to 30% Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.

Origin in Japan, Specification: hard PVC from pipe, no CPVC Shipment: at the beginning of next month Loading Weight: 25 Tons Price FOB: 340- 540 USD