Half Insertion Manual Ic Card Reader Cjt 3900 Suppliers and Manufacturers

PRODUCT DESCRIPTION CJT-3900 is a half-insertion manual IC card reader-writer which conforms to the ISO7816 standard. It is mostly used in the industries such as financing, electric power, medicine and lottery. TECHNICAL INDICATORS Power Supply DC5VÂ

PRODUCT DESCRIPTION CJT-T5 swipe card reader is a card reading device specifically suitable for banking service. It is small sized, compactly structured and easily installed and can be directly connected with a PC to read card information. PRODUCT FEATURES *Supports ISO7811/78121ï¼?AAMVA magnetic card read only. *Single-track, double-track and triple-track types: are all available. *Small size: is suitable for various POS terminals and other devices. *Supports bidirectional card insertion/reading. *RS-232, USB, keyboard or TTL communication methods: are optional. CUSTOMIZABLE We can make products according to your needs.

Product Description CJT-A6 series motorized card reader/writer supports RF/IC card R/W and magnetic card R, which is a product created from many years of technology and experience accumulation of ACT and the market demand. CJT-A6 is designed based on the development concept that integrates multiple functions. Careful material selection, rational structure and stable circuit design make it a highly reliable product, meanwhile, its bezel is designed with a user-friendly LED; all these enable CJT-A6 to better meet the market requirements for motorized card reader/writer. Product Features *EMV and PBOC certified. *Supports ISO7810/7811 magnetic card reading only. *Supports ISO7816-2 contact IC card reading/writing. *Supports ISO14443-A Mifare Type A/B card reading/writing. *Jitter card-in function: effectively precludes unauthorized card reading. *Protruding bezel: for anti-theft is available *Bezel with LED light: provides card insertion indication and/or lighting and prevents the card being left inside. *Independent sensor design: makes reader maintenance easy. *Dustproof sensor lens: prevents sensor from dust and/or the other foreign materials. *Mechanical shutter for protection against dust and/or the other foreign materials in the bezel position: enhances the reliability of the card reader. *Four-set driving wheels: ensure the card transmission stability and liability and prevent card jam or block. *One group of driving wheels in front of mag-head: enables automatic re-reading, which increases success rate of card reading. *Card detecting function: automatically handles abnormal cards (broken card, incomplete card, etc.) and is able to eject card in case of power failure. *Self-balancing mag-head reading function: provides stable reading and easy maintenance. *High-performance plastic materials: ensure reading precision and product consistency. CUSTOMIZABLE We can make products according to your needs.

MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They can be directly used the Windows operating system with driver and the API functions. The development cycle simple and short. The reader not only supports series IC cards according to ISO14443 TypeA/B, ISO15693 but also SAM cards compliant with ISO7816 (T=0 and T=1). Qualifications: PCD: NXP RC531, RC632; RC400, RC500(select) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, (supports ISO7816 T=0 and T=1) Interface: USB PC/SC Power supply: USB DC5V Power consumption: 150mA LED: four LED (red, green, blue, yellow) Dimension: 123mm ¡Á 88mm ¡Á 25mm Weight: About 200g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF.

Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722(followed shanghai encipherment standard, custom-made) Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm (Mifare One, normal distance) SAM card slot: 2 slots, supported ISO7816 T=0, supported 9600bps & 38400bps Interface: RS232C or USB (build-in CP2102 USB to RS232 converter) Baud rate: 9600 ~ 115200 BPS Power supply: DC5V Power consumption: 180mA Dimension: 123mm¡Á88mm¡Á25mm Weight: about 150g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF 1pc/box, 16*12*5cm.

With the fast growth of personal computing standards, the SUZCR920 smart card reader/writer is a USB full speed device designed for use in the PC environment today. This reader series combines a modern design with the latest technology, and makes it a suitable solution for demanding environments. SUZCR920 has an optional built-in Security Access Module (SAM) slot that supports various high security applications. It is ideal for use in network security, electronic payment systems, electronic identifications as well as other advanced smart card applications. Other casing designs are also available. The reader is especially for applications with banking or credit cards, e.g. e-Banking or e-Payment in home. Compact size of manual insertion type IC card reader/writer terminal WHQL driver. Low cost design ,Easy to operate protocol ,Smart card & Memory Card R/W ,Windows Plug & Play, Microsoft PC/SC certified Supported PC/SC 1.1 . EMV approved (Windows 98, ME, NT, 2000, XP, 2003, Vista, Mac and Linux) Specification Dimension---86mm[ W ]X19mm[ H ]x64mm[ D] Card Standards---ISO 7816-1,2,3,4 Smart Card Card Thickness--- Plastic : 0.76 mm -0.08 mm Interface--- RS232 / USB support dual slot(SAM) Protocol--- T = 0 or T = 1 Asynchronous Power Supply---DC + 5V Built-in 3.3v regulator for single 5v operation Insert Card Durability ---Min 200,000 cycles Max.1Million High speed ---9600~ 115200 bps Operation Temperature---0 to 48 Operation Humidity ---20% - 95 % Static's Storage Temperature---0 to 85. Built-in PLL for USB and Smart Card clocks requirement ,Support EEPROM for USB descriptors customization, including VID/PIDA available in 28-SSOP . Neutral Packing, 86mm[ W ]X19mm[ H ]x64mm[ D].

Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm (Mifare One, normal distance) SAM card slot: 2 slots, Supported: ISO7816 T=0, Supported: 9600bps&38400bps Interface: RS232C or USB (build-in USB to UART converter) Baud rate: 9600 ~ 115200 bps Power supply: DC5V Power consumption: 180mA Dimension: 141mm¡Á100mm¡Á31mm Weight: about 100g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF. 1 pc/box, box size: 16*12*5cm.

Act-a6 series motorized card reader/writer supports rf/ic card r/w and magnetic card r, which is a product created from many years of technology and experience accumulation of act and the market demand. Act-a6 is designed based on the development concept that integrates multiple functions. Careful material selection, rational structure and stable circuit design make it a highly reliable product, meanwhile, its bezel is designed with a user-friendly led; all these enable act-a6 to better meet the market requirements for motorized card reader/writer.

JMY680 series are RFID reader/writer module with IIC or UART serial ports. JMY680 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The module and antenna are integrated design. And the impedance between RF module and antenna was tuned by impedance analyzer. So the module has excellent performance and stability. Qualifications: PCD: NXP RC500, RC531, RC400, RC632 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 80mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default ON SAM card slot: 1 slot, 9600bps /38400bps EEPROM: 512 Bytes PPSS set: Supported Interface: IIC, UART, RS232C or USB to RS232C Bridge(select when place order) Communication rate: IIC--400Kbps; UART--19.2Kbps/115.2Kbps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: 5.0V Power consumption: 150mA Dimension: 70mm¡Á50mm¡Á16.5mm Weight: about 120g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 10 pcs per box, box size 16*12*5cm.

JMY501 series are RFID reader/writer module with UART and IIC serial ports. JMY501 has various functions and supports multi ISO/IEC standard of contactless card; the cards from different suppliers. The RF protocol is complex. But the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module through IIC or UART interface. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is separate design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module's performance and stability. Qualifications: PCD: NXP RC500, RC531, RC632, RC400; FM1722 Working frequency: 13.56MHz RF standard: ISO14443A, ISO14443B, ISO15693 Operating distance: 100mm(depending on card and antenna design) Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only Auto detecting card: Supported, default OFF EEPROM: 512Bytes Interface: IIC & UART (selected by SPS pin, recommend to use IIC) Communication rate: IIC--400Kbps, UART--19200bps/115200bps Max.command length: 511 Bytes Interface level: 3.3V (TTL level; 5V tolerance) Power supply: DC5V Power consumption: 70mA Dimension: 42mm¡Á21mm¡Á8mm Package: DIP32 Weight: about 15g Operating temperature: -77 ~ +185¡ãF Storage temperature: -104 ~ +257¡ãF ISP: Supported RoHS: Compliant 30 pcs per box, box size: 16cm*12cm*5cm.

Chip: Philips Mifare 1 S50-Storage Capacity: 8Kbit, 16 Districts, Two Groups of Numbers at Each District-Frequency: 13.56 MHz-Communication Speed: 106KBoud-Read Distance: 2.5~10cm-Read Interval: 1~2ms-Working Temperature: -20~85 Centigrade-Read Write Duration: >100, 000 Times-Data Storage Duration: >10 Years-Dimensions: ISO Standard 85.6x54x0.80mm /Thin Card/Thick Card- Material: PVC\ABS\PET\PETG-Encapsulation Method: Lamination/Auto Ultrasonic Encapsulation/Auto Soldering-Typical Applications: Enterprise Management, School/Campus Management, Public Transportation, Express-way Tollgate, Parking Lot, Residence District Management . Dimension:cr80, 0.76mm x 85.5mm x 54mm. Weight:22g.

The sle5542/sle4442 is a standard, low-cost eeprom memory smartcard with 256 bytes of available storage, with an irreversible write protection feature and a 3-byte programmable security code. Bl7442&fm4442 is compatible. See more detail please feel free to contact with me. Pack according to your instructions

1) size: customer's requirements are available 2) material: pvc/ abs/ pet/ petg 3) printing layout: blank/customize Disclaimer: the pictures relevant to this product have been provided for reference only. We do not have any intellectual property rights over the trademark(s) displayed, and are not selling any products containing this/these marks. Dimension:cr80, 0.76mm x 85.5mm x 54mm Weight:20g

Card in excellent printing, fast delivery , competitive price , good communication and best sevice Other craftwork is according customers requirments Dimension:cr80, 0.76mm x 85.5mm x 54mm or any size and thicknesses requested

MF1 IC S50 The ever-popular MF1 1K chip card from Philips, also known as MF1 Classic. accordingto the ISO 14443A standard. contains 1Kbytes of read/write memory that canbe used for multiple applications. 1. Electric feature: Contactless transmission of data and supply energy (no battery needed) Operating distance:Up to 100mm (depending on antenna geometry) Operating frequency:13.56 MHz Fast data transfer:106 kbit/s High data integrity:16 Bit CRC,parity,bit coding,bit counting True anticollision Typical ticketing transaction:< 100 ms (including backup management) 2.EEPROM 1 Kbyte,organized in 16 sectors with 4 blocks of 16 bytes each (one block consists of 16 byte) User definable access conditions for each memory block Data retention of 10 years Write endurance 100.000 cycles 3.Security Mutual three pass authentication (ISO/IEC DIS9798-2) Data encryption on RF-channel with replay attack protection Individual sert of two keys per sector (per application) to support multi-application with key hierarchy Unique serial number for each device Transport key protects access to EEPROM on chip delivery 4.Physical Feture: A)Card material: PVC, polyester, ABS, PET, PETG, combination B) Card size: CR80 (54 x 85. 6mm), CR50, custom size C) Options: hole punch, signature panel, loco or hico mag. strip, foil, hologram image, magnetic strip D) Color: white glossy, white matte, custom color finish, custom photo overlay E) Chip available:original MF1 S50, S70 or compatible chinese chip F) Applications: certificate ID card, access control, transportation, LNG, library, parking Shipping Weight: 0.006KG/PCS Disclaimer:The picture related to this product are provided for reference only. We do not have intellectual property rights over the trademark(s) This/these trademarks are not contained when displaying or selling. Pack according to your instructions

Contactless card is also called rf(radio-wave frequency) card. Our contactless card has adopted the most advanced american ait process. The core of ait technology is inlay embedding and module welding. The inlay is embedded into the pvc sheet accurately by ultrasonic measurement and then the module and the inlay are welded within nitrogen gas surrounding. Signature applications of thermal rewrite card:

The logical encryption cards are widely used in medical insurance, data storage, net bar toll, door-control and so on. The chips we adopt include Sidemen's series and ATMEL series, the capacity range between 2k bit and 16k bit.