Copper plated ground rods adopt high-quality Q235 low-carbon steel, by cold drawn procedure to enhance its tensile strength, the outer surface of which is plated with 99.9% pure copper. Copper thickness of 10mil, 13mil, 5mil, 1mil, 2mil can be selected by customers. by plastic sheath
Copper bonded ground rod is mainly used in the grounding device. Due to its good conductivity, corrosion Resistance, tensile strength, etc., copper bonded ground rod can be widely used, and have been recognized By the united states institute of electrical and electronics engineering (ieee) standard, bs standard and International electrotechnical commission (iec) standards. In china, have been recognized in the national Electricity company, and gradually be widely used. -
Copper-bonded ground rods have been accredited UL certificate. Before shipment, our products have gone through many strict inspections to ensure the quality conforms to international standard. Our copper plated ground rods adopt standard quality Q235 low-carbon steel and 99.9% pure copper as the materials, after a complex cold-drawn procedure of the steel, the electrolytic copper is uniformly plated on the steel core. What makes our products more recognized is the thickness of the copper layer, which includes two types of 5mil and 10mil thickness and can also be customized according to customersí» requirements. we ensure our ground rods with excellent mechanical and electric conductivity performance and strong anticorrosive performance, In this way the finished ground rods will not crack ,peel or split when bent to straight angle . Copper bonded ground rods also can be processed with thread which can be made by our thread rolling model designed by ourselves in strict compliance with standard. We also produce our products according to customersí» specifications. according to requirements
Copper bonded grounding rods for electrical earthing
DK-AG / F anticorrosion electrolytic grounding electrode is researched and developed on the basis of our established product DK-AG electrolytic grounding electrode. It is a new design which is environment friendly. This product not only inherits the good points of DK-AG electrolytic grounding electrode - effectiveness in grounded resistance reduction, high stability, easy installation, etc., but also has good performance in extending the service life of steel material of grounding grid and reducing the grounding resistance continually.
GTIN/EAN 5906764380219 Material hot-dip galvanized steel Height / lenght [mm] 1500 Diameter [mm] 16 Weight [kg] 2.4
Features: 1. Resist corrosion better than galvanized rods. It has at least 30-year service life 2. Unique manufacturing process ensures uniform plating thickness 3. Reliable-the product is applicable in various soil moisture, temperature, ph value and varying earth resistivity construction condition. 4. Easy installation and low construction cost. 5. The special way of connecting adopted can deep-drive the rods up to 35 meters underground to meet low-resistance requirements in special occasions. 6. In comparison with the traditional way of using pure copper ground electrode, the cost of copper bond ground rods is much cheaper. 100 pcs/bundle, 500 pcs/pallet
Copper bonded ground rod is mainly used in the grounding device. Due to its good conductivity, corrosion Resistance, tensile strength, etc., copper bonded ground rod can be widely used, and have been recognized By the united states institute of electrical and electronics engineering (ieee) standard, bs standard and International electrotechnical commission (iec) standards. In china, have been recognized in the national Electricity company, and gradually be widely used.
BSD series Copper Bonded Ground Rods are made of high-quality Steel core coved with 99.9 electrolytic copper molecular. The thickness of surface copper plated layer is 0.25mm. Molecular bond with steel core surface is formed by electroforming process, which is highly conglutinated (tight bond and have rolled screw thread). Steel cores are required diameters rods with tensile strength being as high as 600Nmm2 so that earth rods can easily get to deep underground by impact. It is ensured that earth rod can be used at least fifty years. 10pcs one bundle,100pcs one pallet.
1.99.9% copper 2.Q235 steel 3.Copper thickness:>=0.254mm 4.Tensile strength:>=500n/mm2 5.Offer oem service Specifications Copper bonded ground rod is applying 99.95% pure copper on low carton steel by electroplating. Ground rod technical specification: 1) copper purity is 99.95%. 2) copper layer is over 0.2mm . 3) the steel core is low carbon steel, and the carbon content is about 0.15%. 4) the steel core has a tensile strength not less than 570nm/mm2. 5) the ground rod is fully covered with copper cladding without any cracks, holes, cavities etd. Preventing exposure of the steel core to soil and moisture. The ground rod is suitably treated to prevent oxidation of copper bonding. 6) the ground rod is capable of being bent 90 degrees at a maximum radius of 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding. 7) good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel We can supply ground rod in all sizes and shapes, threaded and/ or tipped. 1) ground rod can be made double heads thread, thread can be packed by plastic sheath 2) one end is pointed and the other end is threaded for extend 3) one end is pointed and the other end is flat. *special sizes and copper thickness can be supplied on request In bundles and pallets
BSD chemical ground electrode system is a new type ground system applied in locations which have higher ground requirements and are difficult to do ground work. Chemical ground electrode system is made of advanced alloy compound. Electrode surface is copper alloy to ensure the highest conductivity capability and longer service life. Conductor internal fillings contain specially made electrolytic salts which can fully absorb moisture in the air. It can release the active ions to the soil through deliquescence. It further promote conductor outer to slowly release to reduce resistance and keep a long-term resistance stability through the combination with moisture in air and soil. Compounds in conductors gradually change into colloid transparent states as time goes. Making use of conductivity property of colloid compounds, the whole system is kept at ion exchange state for a long life, thus forming ideal electrolytic ion grounding system. Ground resistance may gradually decrease after conductor internal slow-release fillings are buried and it will be stable in half a year to one year. Slow release will last as long as several years. Main connection components of BSD chemical ground electrode system are exothermically welded, removing connector loose phenomenon easily arising in other joining methods. One set, packing by sea delivery standard.
Copper clad Steel Grounding Rod has been widely used as composite conductor. It is a kind of bimetal composite material manufactured using JSBOUND's unique technology (molecularly boding pure electrolytic copper onto low carbon high tensile steel cores). Therefore it can resist corrosion better and can be easily driven to great depths. Features 1. Resist corrosion better than galvanized rods. It has at least 30-year service life 2. Unique manufacturing process ensures uniform plating thickness 3. Reliable-the product is applicable in various soil moisture, temperature, PH value and varying earth resistivity construction condition 4. Easy installation and low construction cost 5. The special way of connecting adopted can deep-drive the rods up to 35 meters underground to meet low-resistance requirements in special occasions 6. In comparison with the traditional way of using pure copper ground electrode, the cost of Copper bond ground Rods is much cheaper. 10pcs/bundle.
Place of Origin: Hebei, China, Meterial:carbon steel size 6*18 8*18 6*20 8*20 or as your request produce according to customers' requirement MOQ&payment:Negotiable Port:Tianjin package cartons & pallets according to customers' requirement.
**technical specification: 1) thickness of the copper layer is more than 0.254mm(all can be done to your demand) 2) the core steel rod shall have a tensile strength of not less than 580nm/mm2. 3) the steel core is low carbon steel, and the carbon content is about 0.15%. 4) the purity of the copper using as cladding shall be 99.9% pure copper. 5) the copper ground rod will be capable of being through 90 at a maximum radius if 100mm with no copper fracture and with no ill effect on the bond between the steel and the copper cladding. 6) good in anticorrosion that usage-life is more than 50 years or more, constant low resistance and good plasticity which had the characteristics of copper as well as steel Seaworthy exportation packaging
The advantage of the ground straight rods 1. Material: 100% virgin raw material with submicron grain size; 2. Grade: Various grades for choice; 3. With strict tolerance extent control, the tolerance can reach +/-0.01mm; 4. Precision Ground and polished; 5. Product Types available: Blank rods, ground rods, thread rods, rod with one hole; 6. High wear resistance, high hardness and impact toughness; 7. Advanced technology, automatic pressing, HIP sintering and precision grinding; 8. Having very good mechanical &chemical stability; 9. High quality & reasonable price & fast delivery & best service.
15-18 micron copper bonded on each sizes of rods, plates and their accessories in brass, gun metals and cast iron As per sizes
Product:Rods Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.2, based on 42 reviews price:Start from 20 USD SS Rods, ASTM B221, UNS N06600, UNS N02200, UNS N06601, UNS N08800 High Nickel Alloy Rods, supplier. RFP India is India's well-known manufacturer, supplier and exporter of Rods, which is an iron alloy with a very low carbon (less than 0.08%) content in contrast to cast iron (2.1% to 4%), and has fibrous inclusions known as slag up to 2% by weight. Many items, before they came to be made of mild steel, were produced from rods, including rivets, nails, wire, chains, rails, railway couplings, water and steam pipes, nuts, bolts, horseshoes, handrails, wagon tires, straps for timber roof trusses, and ornamental ironwork. Rods might be round, square, rectangle or flat, and flat rods might be narrow or broad. Rod iron is usually a cut from flat bar iron in a slitting mill to provide the raw material for nails.
Cable connector Ground clamp Strain clamp Copper lugs with clamp C-clamp Insulation piercing connector Wedge clamp Aluminium-alloy tension clamp Four-core-centralized dead end clamp Aluminium-alloy dead end clamp Copper earthing rod Copper power shunts Parallel-groove connector