Product Good Use Stainless Steel Wool Fill To Stop Mice
Material
Stainless steel and poly fiber
Weight Ranging from 2000gsm
Size 4"*10m per roll or as requested
Width
47"/48"
Package Roll or Sheet
B):Feature:
1. 100% non-toxic and environmentally safe
2. Easy to install due to its flexible, compressible nature, comes in rolls and can be cut to size or shape desired, stuff it in the hole, and youâ??re done.
3. It is a permanent solution, will not rust or corrode over time, dose not shrink, stain, pull out.
4. Made of sharp durable fibers material which is suitable to die cut to specific shapes and sizes.
5.Most consistent material for exhaust applications with strength in all directions as cross-lapped material going at approximately 90 degree angles to other fibers.
6. Installs under landscaping and allows grass and small plants to grow through, thus being an invisible force against pests.
C):Function:
1. Fill fabric is an exclusion fabric used by professional nuisance control and pest control operators.
2. It is composed of stainless steel and poly fibers. This blend of materials gives it an extra â??spring backâ?�, allowing for easier fitting in crevices and the ability to stay in place well. Cut it 2-3 times the size of the opening to make a tight fit.
3. It is highly resilient and is an impenetrable barrier against rodents and pests.
D):Application
Burrowing animals such as rats, chipmunks, gophers, groundhogs and nutria can dig beneath the ground and ruin landscaping, chew through cables and destroy dikes and levees. Prevent these animals from wreaking havoc beneath the ground, currently protecting many public and private sites including:
Tree pits
Shopping mall landscapes
Planters
Parks
Sports fields
River and canal banks
Retention ponds
National historic sites
Outdoor amphitheatres
E):Install Instructions
1. Install it by pressing it into rodent-prone crevices with gloved hands or simple tools like a putty knife or screwdriver.
2. Do not install it close to live electrical conductors, since stainless stell is an electrical conductor. Installing IT around fully sealed electrical conduit coming out of a wall is safe.
Products:High Quality Grey Stainless Steel Hardware Cloth In China
Product Description
product profile.jpg
A):Specification:
Product High Quality Grey Stainless Steel Hardware Cloth In China
Material
Stainless steel and poly fiber
Weight Ranging from 2000gsm
Size 4"*10m per roll or as requested
Width
47"/48"
Package Roll or Sheet
B):Feature:
1. 100% non-toxic and environmentally safe
2. Easy to install due to its flexible, compressible nature, comes in rolls and can be cut to size or shape desired, stuff it in the hole, and youâ??re done.
3. It is a permanent solution, will not rust or corrode over time, dose not shrink, stain, pull out.
4. Made of sharp durable fibers material which is suitable to die cut to specific shapes and sizes.
5.Most consistent material for exhaust applications with strength in all directions as cross-lapped material going at approximately 90 degree angles to other fibers.
6. Installs under landscaping and allows grass and small plants to grow through, thus being an invisible force against pests.
C):Function:
1. Fill fabric is an exclusion fabric used by professional nuisance control and pest control operators.
2. It is composed of stainless steel and poly fibers. This blend of materials gives it an extra â??spring backâ?�, allowing for easier fitting in crevices and the ability to stay in place well. Cut it 2-3 times the size of the opening to make a tight fit.
3. It is highly resilient and is an impenetrable barrier against rodents and pests.
D):Application
Burrowing animals such as rats, chipmunks, gophers, groundhogs and nutria can dig beneath the ground and ruin landscaping, chew through cables and destroy dikes and levees. Prevent these animals from wreaking havoc beneath the ground, currently protecting many public and private sites including:
Tree pits
Shopping mall landscapes
Planters
Parks
Sports fields
River and canal banks
Retention ponds
National historic sites
Outdoor amphitheatres
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
Stainless Steel Strip
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
