Performance characteristics of ultra-high power graphite electrode in 400 arc furnace
Our products are characterized by high strength, good electrical conductivity, good thermal shock resistance and low consumption, and are widely used in metallurgical, chemical and mechanical industries. 50 % of the products are sold well in 30 provinces, cities and autonomous regions in China, and 50 % are exported to more than 30 countries and regions including Southeast Asia, Japan and South Korea, Europe, the Americas, and Africa.
Technical parameters of ultra-high power graphite electrode in 400arc furnace
Specification for the Use of Ultra-High Power Graphite Electrodes in 400 Electric Arc Furnace
Points to note for the use of graphite electrodes:
1, wet graphite electrode, dry before use.
2, remove the foam protective cap on the spare graphite electrode hole, check whether the inner thread of the electrode hole is complete.
3, clean up spare graphite electrode surface and hole thread with compressed air without oil and water; Avoid cleaning sand cloth with steel or metal brushes.
4, carefully rotating the connector into the electrode hole at one end of the backup graphite electrode(it is not recommended to load the connector directly into the electrode removed from the furnace), not to collide threads.
5, the electrode hanging equipment(recommended graphite hanging equipment) into the electrode hole at the other end of the backup electrode.
6, when lifting the electrode, loosen the soft material to the bottom of the end of the standby electrode connector to prevent the ground from hitting the connector; Lift the pendant ring with a hook, and the lifting electrode must be stable to prevent the electrode from loosening from the B end or colliding with other fixing devices.
7, hanging the spare electrode to the top of the electrode to be connected, pointing at the electrode hole and slowly falling; Rotate the backup electrode so that the spiral hook rotates with the electrode to drop; When the two electric extremes are 10-20mm apart, the exposed parts of the two ends and joints of the electrode are cleaned again with compressed air; When the electrode is finally completely decentralized, it must not be too violent. Otherwise, due to violent collisions, the electrode holes and joints will be damaged.
Graphite electrode is mainly used in arc steel-making furnace, ore-smelting electric furnace, resistance furnace, etc., with good thermal conductivity, high temperature resistance, is widely used in metallurgy, machinery, electrical, chemical, textile, national defense and other industrial sectors. Graphite electrode is generally divided into ordinary power graphite electrode, high power graphite electrode and ultra high power graphite electrode.
HP 400 Ã? 1800mm Graphite Electrodes Price Uzbekistan
HP 400 1800mm Graphite Electrodes
HP 400 Graphite Electrodes Price Uzbekistan
400mm HP Graphite Electrodes Uzbekistan Price
Graphite Electrodes by CarboGraphite is made to its highest quality, manufactured strictly to international standards, export to Europe. No compromise on quality, SGS inspection can be made before delivery.
High density UHP 400 Graphite Electrode Dia 400mm
Annual Production Capacity of Graphite Electrodes 50,000 MT.
Paste electrodes of 200,000 MT.
Large stock available.
19040 Graphite Electrode 400 Suppliers
Short on time? Let Graphite Electrode 400 sellers contact you.
Dia 400mm UHP Grade 400mm Graphite Electrodes Manufacturers
Annual Production Capacity of Graphite Electrodes 50,000 MT.
Paste electrodes of 200,000 MT.
Large stock available.
(1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting.
(2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China.
(3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking.
(4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
(1) Regular power graphite electrode( RP grade Graphite Electrode) . Graphite electrode with current density less than 17a / cm2 is allowed to be used in common power electric furnaces for steelmaking, silicon smelting and yellow phosphorus smelting.
(2) Oxidation resistant coating graphite electrode. A graphite electrode coated with an anti-oxidation protective layer (graphite electrode anti oxidant). The formation of both conductive and high temperature oxidation resistant protective layer can reduce the electrode consumption (19% ~ 50%), prolong the service life of the electrode (22% ~ 60%), and reduce the electric energy consumption of the electrode. The popularization and application of this technology can bring such economic and social effects as follows: 1. The unit consumption of graphite electrode is less, and the production cost is reduced to a certain extent. For example, according to the consumption of 35 graphite electrodes per week and 165 refining heats of LF refining furnace in a steel-making plant without shutdown in the whole year, 373 (153 tons) electrodes can be saved every year by using graphite electrode oxidation resistance technology, and RMB 2585700 can be saved by RMB 16900 per ton of ultra-high power electrode per year. 2 The graphite electrode consumes less electricity, saves the unit electricity consumption of steelmaking, saves the production cost, saves energy! 3. Because the graphite electrode is replaced less times, the labor amount and risk coefficient of operators are reduced, and the production efficiency is improved. 4 Graphite electrode is a high consumption and high pollution product, which has a very important social significance in the days of promoting energy conservation, emission reduction and environmental protection. This technology is still in the stage of research and development in China, and some domestic manufacturers have begun to produce it. It is widely used in Japan and other developed countries. At present, there are also companies that import the anti-oxidation protective coating in China.
(3) High power graphite electrode (HP grade Graphite Electrode). Graphite electrode with current density of 18-25a / cm2 is allowed to be used in high power electric arc furnace for steelmaking.
(4) Ultra high power graphite electrode( UHP grade Graphite Electrode). Graphite electrode with current density greater than 25A / cm2 is allowed. It is mainly used in ultra high power EAF.
The chemical properties of graphite are very stable, high temperature resistance, corrosion resistance, and good conductivity.Therefore, graphite can be used as refractory material, sealing material, conductive material, and is widely used in high temperature metallurgy, sand finding, paint lubricant, pencil lead, pigment, polishing agent, petrochemical industry, synthetic fiber, heater and other industries.
The chemical properties of graphite are very stable, high temperature resistance, corrosion resistance, and good conductivity.Therefore, graphite can be used as refractory material, sealing material, conductive material, and is widely used in high temperature metallurgy, sand finding, paint lubricant, pencil lead, pigment, polishing agent, petrochemical industry, synthetic fiber, heater and other industries.
Graphite Powder is our ultra-fine powder. Graphite powders are composed primarily of ultra-fine particles classified as per ultrafine size for various applications.
It has 98-99% of Fixed Carbon content. It has self-lubricity and plasticity in high temperatures.
Applications
Drilling
Conductive paints
Electrically and thermally conductive coatings
Baked graphite block with following specifications: Apprant density: 1.6g/cmâ?º min.
Specific resistivity: 2 5 u m max.
Ash:1.0% max.
Sulphur: 0.3% max.
Size: 3150mm X 630mm X 600mm
Customized production available, please enquire.
Omniscient International is a trusted ISO & CE Certified Manufacturer of industrial-grade carbon brushes in India. We specialize in producing CG 626 Copper Graphite Carbon Brushes specifically designed for generators and high-load electrical machinery.
CG626 grade carbon brushes are made using high-purity copper graphite, offering excellent electrical conductivity, thermal resistance, and durability under heavy-duty operations. These brushes are ideally suited for generators where stable current transmission and long service life are critical.
19040 Graphite Electrode 400 Suppliers
Short on time? Let Graphite Electrode 400 sellers contact you.
