Single girder gantry crane Specifications Lifting capacity: 5 - 20 ton Lifting height: 6 - 12m Span: 7.5 -35 m Lifting speed: Single speed or double speed Working temperature: -25 to +40 degree Control method: Pendent control, remote control, ground control Applications: workshop, warehouse, metallurgy, hydraulic engineering, open-pit mines, stockyards, port terminals, nonferrous metal mining and more Single girder gantry crane introduction 5 - 20 ton Single girder gantry crane is a light duty crane machine. In general, gantry crane is widely used at outdoor and warehouses to load, unload or grab materials, the gantry crane is equiped with CM1, MD1 model electric hoists, electric hoists travel along with the rails under the I-steel, with accurate movement of up and down, left and right, forward and backward. The single girder gantry crane is prohibited to be used for lifting blazing, melting metal or toxicant, also can not be used in explosion-proof or insulating working conditions.
Dotrum clamshell bridge cranes are widely used in power plants, freight yards, workshops, docks, etc., and are mainly responsible for operations such as feeding, handling, mixing, taking and weighing. The crane can realize manual, semi-automatic and fully automatic control. It has a heavy duty work system with A6 working level. The rated lifting capacity is generally 5 ~ 20t. Grab opening direction can be parallel or vertical to the main beams. The picking device is a four-rope grab with double reels, which has a simple structure and reliable operation. The grab can be opened and closed at any height. It can be used indoors or outdoors. Add rain cover when outdoor use.
Double beam gantry crane is a variant of gantry crane. There are double-beam gantry cranes, as well as single-beam gantry cranes. It is mainly used for loading and unloading of outdoor cargo yard, storage yard cargo and bulk cargo. Gantry cranes have the characteristics of high site utilization, large operating range, wide adaptability, and strong versatility. They have been widely used in port cargo yards. Its metal structure resembles a door-shaped frame. Two feet are installed under the main beam, which can directly walk on the ground track. The main beam can have outriggers at both ends. Gantry cranes are bridge-type cranes where the bridge is supported on the ground track by the legs on both sides. It is structurally composed of a mast, a trolley operating mechanism, a crane trolley and electrical parts. Some gantry cranes have outriggers on one side, and the other side is supported by a factory or trestle, which is called a semi-gantry crane. The gantry crane consists of the upper bridge (including the main beam and the end beam), the outriggers, and the lower beam. In order to expand the working range of the crane, the main beam can extend beyond the legs to one or both sides to form a cantilever. A crane trolley with a boom can also be used to expand the crane's operating range by tilting and rotating the boom.
Single Girder Gantry Crane is used together with CD/MD model electric hoist, traveling on the railway for general handling and lifting operations. It is consists of 4 parts, they are main beam, electric hoist, two ground beams and four legs. This machine is a regular crane widely used at open ground and warehouse to load, unload or grab materials for highway, bridges, power station and other construction workshops projects. Parameters feature: Lifting capacity: 3~32t Span: 7.5-31.5m Max. lifting height: 30m Lifting speed: 8 or 0.8m/min Traveling speed: 20 or 30m/min Work duty: A3-A5 Work temperature: -20°C-+40°C Control method: Pendant line with pressing button, remote control or cabin control
Single gantry crane is a cost-effective alternative wherever the installation of bridge cranes is impractical due to a need for a raised runway structure. They are also an ideal supplement to bridge cranes at the workstation level. It can lower
MH model single beam gantry crane(box frame gantry crane) is matched with CD1 or MD1 model wire rope electric hoist, it is a kind of track travelling mid-duty type gantry crane, the main beam and legs are manufactured by plate steel, the frame is box frame, the capacity are from 3t to 32t, the span from 7.5m to 35m, the working temperature within -20--+42 centigrade, the duty class is A3~A4. This single beam gantry crane is commonly used gantry crane, it be used in outside warehouse for loading/unloading and lifting material. Both ground control and cabin control.
MG model double beam gantry crane with hooks is applied in outside plant or railway sideways to conduct common lifting and loading unloading works. This double beam gantry crane is composed of two beams, four support legs, crane travelling systems, trolley and electric equipment. The frame of beams and legs adopts box-type welding mechanism. The crane travelling mechanism adopts separate drive. All mechanisms are operated in the driver's cabin. Power supply of crane adopts cables and sliding wires, select one when ordering. The MG model gantry crane is heavy duty type crane, the duty grade are A3~A6, the capacity from 5t to 250t, the span from 7.5m to 35m, the standard lifting height are 6m, 9m and 12m, the temperature of working environment within -20~+42 degree.
It has box-shape structure and truss structure two kinds of gantry frame, the former have good techniques and easy fabrication, and the latter is light in dead weight and strong in wind resistance. The complete machine features light dead weight, simple structure and easy installation and maintenance, so that it is applicable to outdoor operational sites of medium and small lifting load for general handing such as factories and mines, freight yard and warehouses. Electricals and other parts are packed by high quality plywood crates, Main beam packaged by plastic film and woven plastic cloth.
- double-jaw grab bucket - six-jaw grab bucket - elastic asynchronous grab bucket - leak-proof grab bucket - radio-telecontrol grab bucket - underwater dredging grab
Single beam gantry crane application Mh single beam gantry crane is a medium and light duty gantry crane, the working duty is a3, a5, are widely used in outdoor operational sites, transport, assemble, check, repair, load and unload at workshop, warehouses, goods yard, factories and mines, freight yard, etc. Mh single beam gantry crane runs at rails, mainly composed of gantry frame (girder, leg, lower cross beam, etc), lifting electric hoist mechanism, crane traveling mechanism and electric control components. The mh single beam gantry crane gantry frame is box-shape structure and truss structure, goodtechniques, easy fabrication, light dead weight. The lifting mechanism is electric hoist, it runs along the lower flange of the i-steel of the girder, can be select model or type, such as explosion-proof, metallurgy hoist, etc, simple structure, easy installation and maintenance Single beam gantry crane feature 1. The gantry beams are welded construction, weldless, inspect by x-ray or ultrasonic, high degree of rigidity and smaller wheel loads 2. Durable performance and high efficiency, long working life with a low-maintenance, reasonable structure, favorable performance 3. Precise electric control system, siemens brand 4. Smooth starting and stopping, safe and reliable traveling, long lasting 5. Low noise, commodious cabin with good view 6. Easy installation and convenient maintenance, excellent exchange ability for parts and components 7. Crane drive: ip54 or ip44, level f insulation
Double beam gantry crane is a kind of track traveling mid-heavy type crane, compose of bridge beam, electric trolley, traveling mechanism and electric system, suitable for where overhead runways are not practical, or in open areas where columns cannot be accommodated. Double beam gantry crane is widely used to do loading and unloading work outdoor, such as open warehouse, material stocks area, cement plant, granite industry, construction industry, and engineering industry and so on, generally equip with lifting hook, also can equipped with other lifting device for special work, like grab bucket, electromagnetic chuck, container spreader, etc. Gantry cranes can be operated from the ground via cable-connected control pendant, radio remote control or from an operator cabin, and multiple controls are possible by switching control from one mode to another. It is necessary to notice that prohibit lift high temperature liquid, flammable, explosive, corrosion and other dangerous operations. Double girder gantry crane feature * reasonable structure, box type steel welding structure, beautiful, strong and reliable * perfect performance, low cost, easy maintenance, excellent exchangeability for parts and components * smooth starting and stopping, safe and reliable traveling * widely used in open storage, stock ground, railway freight station, port and pier to load and move * crane travel mechanism adapts the separate drive * low noise, commodious cabin and good view, all the mechanism are operated in operating housing * equip with wind protection, broken shaft, rollover protection and others are all in readiness * energy saving, reduce energy consumption
Grab bucket In mechanical, hydraulic & electro-hydraulic designs. Single rope, two rope & four rope grabs Available from 0.25cum capacity to 10.0cum capacity, in all design types. Suitable for handling of bulk cargo, dredging, mill scale, steel plant duty, slag
Jmc orbit type container gantry crane (hereinafter referred to as the rail crane) in container ports of loading and unloading operation in our country, usually adopts the quayside container crane with rubber-tyred container gantry crane (hereinafter referred to as the tyre crane) loading and unloading plan, with tyre crane as the main loading and unloading machinery of the rear yard. At home, track only applied in some freight yard, the orbit at the working level, electronic control system, management system lags far behind the existing level of port machinery, cannot satisfying the need of modern port container loading and unloading. Standard interntional package
Power - Master Goliath/Gantry Cranes designed in accordance to IS: 807 & IS: 3177 are essentially the same as the regular overhead cranes except that the bridge for carrying the trolley or trolleys is rigidly supported on two or more legs running on fixed rails or other runway. These ôlegsö eliminate the supporting runway and column system and connect to end trucks which run on a rail either embedded in or laid on top of the floor. A gantry crane has a hoist with trolley which runs horizontally along gantry rails, usually fitted underneath a beam spanning between uprights which themselves have wheels so that the whole crane can move at right angles to the direction of the gantry rails. Cartons on pallet, wooden cases , sea worthy export standard packing.
China HSHCL CE certificate factory mobile gantry crane China HSHCL CE certificate factory mobile gantry crane is applied outside warehouse or railway sideways to do common lifting and unloading works, China HSHCL CE certificate factory mobile gantry crane is composed of bridge, support legs, crane traveling organ, trolley, electric equipment, strong lifting winch, the frame adopts box-type welding mechanism, crane traveling mechanisms are operated in the driver cabin or remote control, Power is supplied by cable or slide wire, there are different capacity double beams gantry crane for your choice according to your different use. Electrical and Control Equipment China HSHCL CE certificate factory mobile gantry crane that we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions. Our Service 1 Test before shipment 1. Every China HSHCL CE certificate factory mobile gantry crane will be tested before shipment. 2. Welcome every customer visit our factory and check China HSHCL CE certificate factory mobile gantry crane before delivery, we'll help apply for invitation letter and visa. 2 Installation Professional technical staffs provide installation, commissioning and training services. The installation team can be sent to local site to install for customer. 3 Warranty 1 years spare-parts provided for better maintenance. 12 months warranty when products leave. 4 Delivery Delivery with English user manual, parts manual, product certification and other relevant certificates. 5 Advisory Technical advisory for any time. Our Company Henan Shenghua Heavy Crane Group is a big enterprise specialized in researching, developing, producing and exporting. It mainly produces China HSHCL CE certificate factory mobile gantry crane and all kinds of accessories, which widely cover machinery, metallurgy, electric power, railway, water conservancy, ports, terminals and other industries. Shenghua Heavy Crane Group have more than 600 staff, and covers 200,000 square meters. Our advantages: 1. More than 50 R&D personnel with advanced Science and technology. 2. More than 400 sets advanced Production processing equipment and inspection equipment. 3. Independent intellectual property rights to develop energy saving bridge cranes, gantry cranes, and electric hoist 4. Obtain ISO 9001 certificate and more than 10 series of patent certificates. 5. Efficient service and competitive products. 6. Export more than 100 countries.
Qinhuangdao tianye tolian heavy industry & technology co., ltd, as an affiliate company of the public company tianye tolian, is specialized in design and fabrication of railway and road bridge construction equipment, special transporter and larger-scale carrying equipment. Our products include launching gantry (launching girder/beam launcher), straddle carrier, transporter, special launching gantry, gantry crane and special transporters. The head office is located in qinhuangdao. The manufacturing bases in qinhuangdao and beidaihe cover an area of 210000m². With highly trained engineers, designers and technicians and dedicated support staff, tolian has supplied hundreds of equipment to domestic and overseas market and also has been keeping broadening the international market all over the world.
Technical Parameters Lifting capacity10t Track distance12m Lifting height6m Maximum wheel pressure102kN Speed Lifting speedm/min0.5~5 Small car speed m/min0~20Frequency conversion Large car speed m/min0~30Frequency conversion Electric Hoist TypeNWH 1000-9NOVOCRANES Motor power13kwNOVOCRANES Small car power0.95 kw*1NOVOCRANES Dimensions 266mmFrom wheel to top of hoist Dimensions 495mmFrom wheel to hook center Working class FEM/ISO 2M/M5 End beam running Large car reducerFA-37Bo neng Large car motor power0.75kw*2Bo neng Wheels diameterÎ 240- Wheels distance2500mm Metal structure Main beam height600mmQ345 Main beam cover-6mmQ345 Bottom plate-mm6Q345 End beam3000*220*360 mm Machine working class2M M5 Track type of large car(recommendation)P22 Operation methodRemote operation Power36v 380V 50Hz
It is a small and medium-sized crane running on rails. Single girder is suitable for rated lifting weight of 1-20t, double girder is suitable for rated lifting weight of 1 to 50t, applicable span is 12-30 meters, working environment is within -20 -+ 40 This product is a general-purpose crane, which is mostly used for loading and unloading or grabbing materials in open spaces and warehouses.
Cost-effective and space-saving, Dotrum semi gantry cranes provide an alternative solution for customers whose machineries are required to be positioned along the sides of the factory layout. With one leg moving on the floor rails and the other running on the runway beam, this is a very suitable design for wide factories. The operator will only require 2 operational bays without having the need to incur a high cost to build a continuous runway beam and columns in the centre of the factory. Applicable in all types of industries, Dotrum semi gantry cranes are mainly designed based on the different factory layouts and end user's production flow requirements. As a result, these cranes are available in workshops and yard industries.
It is mainly composed of mast (main beam, support legs, lower cross beam, etc.), lifting mechanism, running mechanism, and electronic control part. It uses an electric hoist as a lifting mechanism, and travels along the main beam bottom flange. The truss has a light weight and strong wind resistance. The whole machine has the characteristics of light weight, simple structure, convenient installation and maintenance, etc. It is suitable for general loading and unloading and lifting work in outdoor places such as factories, mines, freight yards and warehouses within the range of small and medium lifting weights. There are three operating modes: pendant button control, wireless remote control and driver's cab. Power supply can be cable reel and high-altitude sliding wire.
