Gprs Data Logger For Bts Monitoring S272 Suppliers and Manufacturers

Model:S272 Name:GSM 3G M2M RTU (8DI+6AI+4DO+1TH+1USB+1RS232/485) The GSM 3G M2M RTU is a multi I/O port remote terminal unit, through the RS232/485 port can connect intelligent meters or PLC. It is special for BTS monitoring, remote data acquisition, telemetrically, BTS access control and other applications. It supports voice communication, SMS, GPRS, 3G communications. Mainly Features: 1. ARM® Cortex™-M4 32 Bit RISC Core, 168 MHz inside, RTOS system; 2. Widely Rated voltage range, 9~36VDC, Inbuilt large capacity rechargeable backup battery; 3. 4G SD card for save historical data, USB port for configuration and upgrade firmware; 4. 6 analog inputs, 12bits, supports 0-5V, 0-20mA, 4-20mA; 5. 4 Relay outputs, 5A/30VDC,5A/250VAC; 6. 8 digital inputs, dry contact or level input. One of the input can be used as counter; 7. 1 temperature probe input, 1 humidity transducer input; 8. I/O ports with opto-isolated, RS232/485 with 15KV ESD protection; 9. 2 IP data centers, supports Modbus TCP,TCP/IP protocol over GPRS/3G network; 10. RS232/485 can be used as data transparent transmission for different intelligent meters or PLC; 11. Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 12. Supports remotely restart the RTU, and configure it by SMS commands remotely; 13. Supports over voltage protection and phase-reversal protection; 14. 10 SMS Alert and auto dial numbers, can program to receive specified alarm message. 15. 10 access control authorized numbers, can open the BTS door or turn on/off machine with a free charge call at the specified time.

The King Pigeon S220 GPRS RTU Telemetry Data Logger equipped Siemens MC55i quad-band GPRS Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc.

Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and a wide temperature range

Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;

EES All in one system 16KWH LiFePO4 Lithium Battery with AC Charger and 10KW Inverter for solar energy storage application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;

Product introduction: This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installationï¼? Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range CAN2.0 communication interface, has the advantages of strong real-time performance, long transmission distance, strong anti-electromagnetic interference ability System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable; Cell temperature management, can be automatically controlled with the air conditioner heater according to the cell condition to make the cell works at the most suitable temperature, and can be linked with the fire protection system as needed

Smartscan is 8/16 channel dedicated universal input data logger used for data logging/acquisition system. It has n output Gsm wi-fi compatibility Serial, usb & rs-485 interface for communication Firmware upgrade at user end In-built rtc for timed & event based logging at high resolution Easy to use, configurable , windows based software Applications : Cold storage in dairy & food industries Blood banks & pharmaceutical industry Hvac Oil & gas industries Weather station recording Building & energy management Process monitoring for maintenance and troubleshooting applications.

Smartscan : 8/16 ch universal input logger Smartscan is 8/16 channel dedicated universal input data logger used for data logging/acquisition system. It has gsm/wi-fi compatibility which makes it ideal for temperature/ humidity monitoring & logging. It comes in two types : horizontal & vertical Key features : Support universal analog & digital inputs-mv, volt, ma, tc/rtd etc. True 18 bit adc for accurate & stable reading Local data storage with 4mb memory (60, 000 samples/channel) 24vdc sensor excitation output Gsm wi-fi compatibility Serial, usb & rs-485 interface for communication Firmware upgrade at user end In-built rtc for timed & event based logging at high resolution Easy to use, configurable , windows based software

GSM Home Alarm Systems, GSM Medical Alarm, GSM SMS Controller Alarms, GSM GPRS data Logger, GSM Telemetry Systems (M2M),GSM Gate Opener. Remote Monitoring your assets in anywhere and anytime An Innovative GPRS RTU to reduce your management costs GSM GPRS RTU Telemetry Data Logger GSM GPRS RTU Telemetry Data Logger M2M GPRS Terminal with RS485 GPRS Telemetry with SCADA GPRS Data Logger with Modbus RTU protocol GPRS Controller with Modbus RTU protocol GSM GPRS RTU Telemetry Data Logger S240 equipped Siemens MC55i quad-band GSM Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc. The features and functions of GSM GPRS RTU Telemetry Data Logger S240: 1) Quad-band Siemens MC55i GPRS Module and High-density performance line ARM 32-bit MCU inside 2) Direct connection to the GSM GPRS Network 3) Transparent Serial Data Tunneling using low cost SMS/GPRS network 4) Remote Configuration by SMS Messages or GPRS 5) Upload data via GPRS or SMS on Schedule or event occurs 6) Supports Dynamic Domain name or Static IP address 7) Supports SMS, GPRS UDP and TCP protocols 8) Supports Modbus RTU protocols 9) 1USB Port, 1 RS232 Serial Port, and 1 RS485 Serial Port 10) 6 Opto-isolated digital inputs can be programmed to NC/NO/Edge/Level type by switch, Passive Contact Type and Active Contact (3~24VDC) type can be programmed by DIP switch, DIN1 and DIN2 are Completely isolated. when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers 11) 6 digital inputs can be used as Pulse Counters 12) 4 Digital Relay Outputs can be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off 13) 10 Analog Inputs. (12 bit resolution, 0-5V or 0-20mA) 14) 2 Thermometer Inputs for DS18B20, measures temperatures from -55 AC to +125AC Fahrenheit equivalent is -67 to +257 accuracy from -10¡AC to +85 AC, Thermometer resolution is programmable from 9 to 12 bits 15) 4 Power Source Outputs for external device, like Thermometer or transducer, 3 with 3.3V/400mA, another with 12VDC/750mA 16) Supports 1 SMS Center Number and 1 IP address or 1 Dynamic Domain name 17) User friendly PC Programming Interface, it can remotely program the terminals as well as to upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it 18) More Protocols can be updated by user through USB Port with the updated firmware 19) Power supply 9V to 24V(Recommend 12VDC) 20) Size: 168mm*113mm*32.3mm. Standard packing list of GSM GPRS RTU Telemetry Data Logger S240: 1X Mainframe 1X AC/DC adaptor 1X User Manual(CD) 1X GSM ANT PC Configurator is free charge in the CD With internal back up battery. 1X Mainframe 1X AC/DC adaptor 1X User Manual(CD) 1X GSM ANT PC Configurator is free charge in the CD.

Remote Monitoring your assets in anywhere and anytime! An Innovative GPRS RTU to reduce your management costs! GSM GPRS RTU Telemetry Data Logger GSM GPRS RTU Telemetry Data Logger M2M GPRS Terminal with RS485 GPRS Telemetry with SCADA GPRS Data Logger with Modbus RTU protocol GPRS Controller with Modbus RTU protocol GSM GPRS RTU Telemetry Data Logger S240 equipped Siemens MC55i quad-band GSM Module inside, is a low cost, M2M, data logger, universal GSM GPRS Engine which can transmit and receive analog, digital and pulse counter data, PLC, Varity metering equipments to any device connected to the GSM/GPRS network such as mobile phones, Web Sites, monitoring center, control room, SCADA, etc. The features and functions of GSM GPRS RTU Telemetry Data Logger S240: 1) Quad-band Siemens MC55i GPRS Module and High-density performance line ARM 32-bit MCU inside; 2) Direct connection to the GSM GPRS Network; 3) Transparent Serial Data Tunneling using low cost SMS/GPRS network; 4) Remote Configuration by SMS Messages or GPRS; 5) Upload data via GPRS or SMS on Schedule or event occurs; 6) Supports Dynamic Domain name or Static IP address; 7) Supports SMS, GPRS UDP and TCP protocols; 8) Supports Modbus RTU protocols; 9) 1USB Port, 1 RS232 Serial Port, and 1 RS485 Serial Port; 10) 6 Opto-isolated digital inputs can be programmed to NC/NO/Edge/Level type by switch, Passive Contact Type and Active Contact (3~24VDC) type can be programmed by DIP switch, DIN1 and DIN2 are Completely isolated. when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers; 11) 6 digital inputs can be used as Pulse Counters; 12) 4 Digital Relay Outputs can be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off; 13) 10 Analog Inputs. (12 bit resolution, 0-5V or 0-20mA); 14) 2 Thermometer Inputs for DS18B20, measures temperatures from -55¡ãC to +125¡ãC. Fahrenheit equivalent is -67¡ãF to +257¡ãF, ¡À0.5¡ãC accuracy from -10¡ãC to +85¡ãC, Thermometer resolution is programmable from 9 to 12 bits; 15) 4 Power Source Outputs for external device, like Thermometer or transducer, 3 with 3.3V/400mA, another with 12VDC/750mA; 16) Supports 1 SMS Center Number and 1 IP address or 1 Dynamic Domain name; 17) User friendly PC Programming Interface, it can remotely program the terminals as well as to upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it; 18) More Protocols can be updated by user through USB Port with the updated firmware; 19) Power supply 9V to 24V(Recommend 12VDC); 20) Size: 168mm*113mm*32.3mm. Standard packing list of GSM GPRS RTU Telemetry Data Logger S240: 1X Mainframe 1X AC/DC adaptor 1X User Manual(CD) 1X GSM ANT PC Configurator is free charge in the CD With internal back up battery.

Web Enabled By Logger: WEDL-Cloud Based is a advanced new technology Data Logger for un-manned locations data collections and control applications. The data from the remote locations are collected by the Logger and transmitted through GPRS to the Central Server. Also, the remote control functions can be accomplished through the latest internet technology through either web browser or through mobile applications. Applications: Plant Process data Monitoring. Energy consumption Monitoring and Control applications. Gas, Pollution Monitoring applications. Water flow Monitoring and pump house remote control applications.

Model: S262 S263 Name: GSM GPRS 3G 4G Data Logger Keyword: GSM GPRS 3G 4G data logger manufacturer, GSM GPRS 3G 4G Data logger, GSM 3G 4G Data Acquisition Systems, GSM 3G 4G data logging system, Wireless gsm Temperature-Humidity Chambers monitoring, wireless 3G temperature and humidity meter, wireless GSM temperature and humidity recorder, Wireless GSM humidity and temperature sensor. The GPRS 3G 4G Logger is special for remote monitoring temperature, humidity, current, voltage, fuel level, pressure, air condition parameters and so on, it can setup ultra-highâ??high, lowâ??ultra-low 4 alarm level. and 1 digital relay output can control via free charge call, SMS or GPRS. Also, the internal memory can save the historical for half a year for review. It provides daily report, schedule upload, event upload by the GPRS/3G to monitoring center or by SMS to the user mobile phone directly. Module Comparison Instruction Table Model Application Input Types S260/S260C/S260W Indoor 4 Temp Probe,12bits, measure range :55°C to +125°C (67°F to +257°F), 0.5°C accuracy from 10°C to +85°C. S261/S261C/S261W Outdoor S262/S262C/S262W Indoor 4Analog Input,12bits,compatiable with 0~20mA, 4~20mA, 0~5V inputs. S263/S263C/S263W Outdoor Notice *GPS Function is optional.ã??*Outdoor model waterproof class is IP67. *C stands for inbuilt module is CDMA2000. *W stands for inbuilt module is WCDMA. Mainly Features: 1.Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 2.Programmable by SMS Commands or PC Configurator via USB; 3.2 alternate Server via GPRS/3G wireless network, supports IP address and DNS; 4.Compatible with KingCenter CMS-02 via GPRS(Google map), and CMS-01 through SMS; 5.GPS module is optional, measure the Longitude,Latitude,Speed,Direction ; 6.Daily report, schedule upload, event upload; 7.6 authorized phone numbers, each number can be used to receive SMS or both, also can be used for dial to switch ON/OFF the relay outputs, inquiry status; 8.One digital outputs (dry contact, NO/NC) with relay rating 10A/240VAC for connecting the switch of the air conditioner or machines, the outputs can setup as always ON, Pulse output, by SMS, authorized phone number dial in, and alarm events; 9.4 inputs, 12bits, can setup interval time, interval value, ultra-high, high, low, ultra-low alarm can active the relay outputs and send programmable SMS to authorized phone numbers or via GPRS to monitoring center; 10.Internal memory, can save the historical data for review; 11.External AC Power monitoring, AC On/OFF will send SMS to authorized phone numbers; 12.Rechargeable Backup Battery inside can last 18hours; 13.Standard DIN Rail 35mm installation or outdoor enclosure.

Model: S251 Name: GSM GPRS 3G 4G Power Distribution Monitoring System Keyword: GSM GPRS 3G 4G Power Distribution Monitoring Systems, GSM GPRS 3G 4G power quality monitoring, GSM GPRS 3G 4G Power transmission line monitoring system , GSM 3G Transmission Line Security Monitor, GSM 3G energy monitoring system, GSM 3G Transformer Monitoring, GSM 3G Transformer Oil Monitoringâ??, GSM 3G Transformer Oil Health Monitoring, GSM 3G Transformer oil moisture monitoring, GSM 3G transformer oil level monitoring, gsm 3g Transformer Fire alarm, gsm 3g Remote online transformer monitoring. GSM 3G Power distribution safety monitoring system. The GSM GPRS 3G 4G Power Distribution Monitoring System is not only a smart power meter for measuring the power distributor voltage, current, factor, watts, frequency, active power, reactive power, when over current or exceed the pre-set value, will alarm immediately. The GSM GPRS 3G 4G Power Distribution Monitoring System can be used for monitoring the oil temperature, oil level of the transformers. GSM 3G Wireless Power Line monitoring. The GSM GPRS 3G 4G Power Distribution Monitoring System also can be used as a wireless security alarm system for the transformers, e.g.: theft-proof, fall down, and so on. Model Description S250 GSM GPRS Power Cable Anti-Theft Alarm System S251 GSM 3G Power Distribution Monitoring System Mainly Features: 1.ARM® Cortexâ?¢-M4 32 Bit RISC Core, 72MHz inside, RTOS system; 2.Quad-Band GSM Frequency,3G, supports SMS and Voice and GPRS/3G communication; 3.Programmable by SMS Commands or PC Configurator via USB; 4.A/B/C phase power up it directly, Inbuilt large capacity rechargeable backup battery; 5.Suitable for three-phase four-wire system, input voltage: 100~400V, input current:0~5A; 6.Monitoring A/B/C 3 Phase input over current, over voltage , factor, watts, active power, reactive power exceeds alarm; 7.Power input PT,CT rate are programmable; 8.Accuracy of current, voltage is 0.2 class, power and watts is 0.5 class, sampling is 0.1seond. 9.Large internal memory can save 1000 event historical data; 10.6 analog inputs, 16bits, supports 0-5V, 0-20mA, 4-20mA; 11.2 digital outputs, 5A/30VDC,5A/250VAC, can be program to events or turn on/off by SMS; 12.8 digital inputs, NC/NO/EOL type, when digital input recover can alert by SMS; 13.I/O ports with opto-isolated and lightning protection; 14.Provide one 5VDC@1A power for additional device; 15.Equips LCD to display the real time data and for programming; 16.2 IP data centers, supports GDW 376.1â??2009 protocol over GPRS/3G network; 17.1 RS485 can be used as data transparent transmission for additional intelligent meters or PLC, with 15KV ESD protection; 18.Automatically resend the data while communication failure, GPRS failure will alert by SMS text; 19.8 SMS Alert and auto dial numbers, can program to receive specified alarm message. 20.Automatically report its status to users by the specified time.

Product Description Cloud Data logger/IoT/GPRS/WiFi/ is a combo device that provide data logging along with cloud computing facility. It reads the data from any digital device through RS232 or RS485 (Modbus-RTU) and stores, uploads the same by user defined interval. Hardware Feature: Up to 8/16/32 devices can be connected simultaneously on a single serial port. 20 registers per device can be configured for saving data. Total 3 00 000 records can be saved in data memory. Cellular modem for data transmission (GSM/GPRS). USB keyboard connectivity for configuring devices. Report dumping in Pen drive in .xls format for reporting. User defined time intervals for data logging & uploading. Provision for manual data collection & upload. No need for installing additional, costly SCADA/PLC systems. Software Feature: Authorized access on the server for better security. Data easily accessible from anywhere across the globe. Excel format report can be generated on web application. Provision to create multiple users on web application. It is a Cross- platform software.Can run be on any operating system. Can run on devices like mobile phones, tablets, laptops, desktops etc. that have a web browser installed. Daily Reports can be generated through web application and shared via email. Advantage: Real time monitoring of Digital indicators/process parameters at plant/factory. Any controlling measure can be done on immediate basis. SCADA & Computer system not required.Internet connection is not required at site. Cost effective, as it works on GSM technology. Password protected for better security. Unauthorized access to data is restricted. Autosave feature to prevent data loss during network failures. Device will save the data and send it to the destination when the network is up and running. Isolated from current system to avoid any hindrance in process execution. Specification: Up to 8/16/32 devices can be connected via RS485 modbus protocol. Flexible configuration at the user's site for settings like 20 Registers per device, baud rate, bits and parity. Configurable header for each register. 40,000 record saving capacity for each device with timestamps. Data logging within device at user defined intervals. Supports standard IBM Keyboard for device configuration. Manual data collection & uploading option. Cloud logging at user defined intervals. Cloud logging interval is common for all devices. In case of network issues, the records are auto-saved and sent to server once the connectivity resumes. Standard mobile 2G SIM is used for data transmission to cloud server. Convenient Housing (200 x 190 x 96 mm) which can be easily mounted on panels. Application: Industrial Control Panels Industrial Automation Cold Rooms Blood Refrigeration Banks Energy Monitoring System RMC Plants Asphalt Mixing Plant Weighing Application Process Control

Rtd ccms is battery powered compact data logger with single input. It is reliable & cost effective digital temperature recorder mainly used in cold chain monitoring system, transportation & industrial applications. It provides real-time viewing of temperature information and has usb connectivity for data retrieval. Key features : Local data storage with 4mb memory (60, 000 samples/channel ) Usb host port for easy data retrieval Serial, usb & rs-485 interface for communication In-built rtc with variable logging interval In-built rechargeable li-ion battery (with 1 month stand time)

Temptale Ultra USB Temperature Datalogger - USED CTS000035