Glass Beads For Sandblasting Suppliers and Manufacturers

Micro Glass Beads for sandblasting Micro Glass Beads are made of hardened spherical soda lime glass and are a multi-faceted and commonly used media. Cost effective, ideal where metal contamination is not allowed, and often used to peen difficult to reach part areas. Full Description : ï?·Does not cause dimensional change to the base material ï?·Environmentally friendlier than chemical treatments ï?·Leave even, spherical impressions on blasted part surface ï?·Low breakdown rate ï?·Lower disposal & maintenance costs ï?·Soda Lime glass does not release toxins (no free silica) ï?·Suitable for pressure, suction, wet and dry blasting equipment ï?·Will not contaminate or leave residue on work pieces

1) Product Introduction Glass beads for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity. High Strength Glass Beads (for Blasting) With compressed air as implicit power, this product is made by sprinkling beads under high speed and pressure on the surface of workpiece for peening and polishing. Other purposes of the products are as follows: 1. Clear diverse moulds of impact forging, forging, glass, rubber and plastic, metal casting and extrusion. 2. Eliminate tensile stress, increase fatigue life and enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc. 3. Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering 4. Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts 5. Clear electromotor and such parts as loop, electric brush and rotor of during heavy repair 6. Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube. Be used for peening aggrandizement and polishing of textile machinery parts. 2) Technical references Appearance: Clean and transparent, no visible bubbles and impurity. Density:2.4-2.6g/cm3 Hardness:6-7(Moh's) Spherical beads: SiO2 content: 3) Package 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm; the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 250.2kg. 2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is paper-plastic compound bag to prevent leak or damp. The net weight of each is 250.2kg. 3.According to clients' requirement.

Sandblasting Glass Beads Glass beads for shot peening / shot blasting /grinding 1.Minimum order quantity: 20 tons 2. FOB price: $280 - $340 a tonne, tianjin port 3. Payment: T/T, L/C, WESTERN UNION 4. Supply ability: 500 tons per month 5. Period for delivery: According to the quantity of goods, Usually 15 days can delivery 6. Package: Conventional packing ONE, a bag of 25 kg, 40 bags a tray; Conventional packing TWO, a bag of a tray per ton; Three, can also according to customer requirements for packaging. 7. Sample: Provide free samples, and bear the postage. Glass microspheres: Glass microspheres, also known as glass beads, have been used for at least 100 years, which were found applications in in many industries and thousands of applications including aerospace and military materials, molded plastic components, retroreflective highway signs, oil and gas, recreation, paints and coatings, transportation, construction, mining explosives, personal care, cosmetics and consumer products, amongst others. In recent years, glass microspheres have experienced excellent growth due to new high-value, high-growth industries that have emerged and the availability of high quality glass microspheres with perfectly sphericity, tight tolerances and particle size distributions available on the market. These industries include biomedical, life sciences, microscopy, automotive, high-tech equipment and specialty applications.

Glass beads for roadmarking He main items as follows: A. Reflective glass beads for road marking B. Coated glass beads C .Glass beads for sandblasting, D. Glass beads for grinding As requested, we can grade our beads in compliance with bs6088, en1423&en1424, aashto, jis r3301, as/nzs 2009:2002, other detailed requirements. 4)package 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm; the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25f+0.2kg. 2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each is 1000f+8kg.

Glass bead The coated glass bead have been treated with high quality organic materials on their surface, thus bearing better features in quality. Our company has developed this unique product after absorbing advanced technology from foreign countries and it has the following advantageous features: A The contrary reflexible of the micro glass beads maintains since we select the materials which are similar to the nature of micro glass beads. B In rainy and wet weather, ordinary glass beads would be surrounded by water and result in th low reflection rate. However, the micro beads with coated can maintain the reflection effect to a great extent. C Ordinary glass beads would pile up in the sprayer after absorbing water. However, micro beads with coated would not so, thus increasing the working efficiency. D since micro beads with coated contain special adhesives, thus improving the integrity between the micro beads and the paints. E Can prevent sinking of micro beads to the bottom of paints. F after the treatment of coated thus absorbing less dust from air. Products according to international standard include: BS6088, EN1423&EN1424, AASHTO, JIS R3301, AS/NZS 2009:2002, KS, etc. Glass bead for jetting has the features of chemical stability, high mechanical intensity and hardness. They can be jetted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity. Glass Bead for grinding ,With the advantages of smooth surface, even size, high hardness, wearable and stable, widely used as disperser, grinding media and filler materials in day, paint, ink and chemical industry. Technical references Appearance: Spherical beads:f+80%(600< sieve size< 850umf++spherical beadsf+75%) Density:2.4-2.6g/cm3 Refractive index:ndf+1.50ff Glass bead composition:the glass bead is made of sodium and calcium. Sio2f++68% Appearance: beads with round ball shape and no visible impurity. Refractive index:+1.5 Density:2.4-2.6g/cm3 Sio2 content:+68% Size distribution and spherical beads. Water resistance: when the wastage of 0.1n hydrochloric acid is 10ml, the surface of glass bead does not fade. Coated feature: after soaking in water for 30 seconds and dry for 2 hours under in-door temperature, they can easily pass through filler while shaking slightly. Appearance: clean and transparent, no visible bubbles and impurity. Specific gravity:2.4-2.6g/cm3 Hardness:6-7 Compressive strength:+1200n Appearance: clean and transparent, no visible bubbles and impurity. Density:2.4-2.6g/cm3 Hardness:6-7 Spherical beads:+75% Sio2 content:+70% Package 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25+0.2kg. 2.Using double-deck package, the inner is polythene fim and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each is 1000+8kg. 3.According to clients' requirement.

Glass Beads is a kind of wide application and speacial performance material.Our company specializes in industrial machinery shot peening, cleaning, polishing glass beads,advanced production technology to ensure the good quality of Glass Beads for sandblasting, the hardness, toughness and roundness of the products are higher than the industry standard, and reach the requirements of the national energy saving and environmental protection. Glass Beads Technical Data Sheet: Appearance: Colo Apearance: Colorless transparent sphere, smooth round, no obvious bubbles or impurities. Density: 2.4-2.6g/cm3 Reflective Index: 1.5 Composition: Sodium Calcium glass composition Si02: 62% Packing: 25kg / plastic waterproof woven bag In 1MT Big Bag

Glass Beads is a kind of wide application and speacial performance material.Our company specializes in industrial machinery shot peening, cleaning, polishing glass beads,advanced production technology to ensure the good quality of Glass Beads for sandblasting, the hardness, toughness and roundness of the products are higher than the industry standard, and reach the requirements of the national energy saving and environmental protection. Glass Beads Technical Data Sheet: Appearance: Colo Apearance: Colorless transparent sphere, smooth round, no obvious bubbles or impurities. Density: 2.4-2.6g/cm3 Reflective Index: 1.5 Composition: Sodium Calcium glass composition Si02: 62% Packing: 25kg / plastic waterproof woven bag In 1MT Big Bag

Glass Beads is a kind of wide application and speacial performance material.Our company specializes in industrial machinery shot peening, cleaning, polishing glass beads,advanced production technology to ensure the good quality of Glass Beads for sandblasting, the hardness, toughness and roundness of the products are higher than the industry standard, and reach the requirements of the national energy saving and environmental protection. Glass Beads Technical Data Sheet: Appearance: Colo Apearance: Colorless transparent sphere, smooth round, no obvious bubbles or impurities. Density: 2.4-2.6g/cm3 Reflective Index: 1.5 Composition: Sodium Calcium glass composition Si02: 62% Packing: 25kg / plastic waterproof woven bag In 1MT Big Bag

Glass Beads is a kind of wide application and speacial performance material.Our company specializes in industrial machinery shot peening, cleaning, polishing glass beads,advanced production technology to ensure the good quality of Glass Beads for sandblasting, the hardness, toughness and roundness of the products are higher than the industry standard, and reach the requirements of the national energy saving and environmental protection. Glass Beads Technical Data Sheet: Appearance: Colo Apearance: Colorless transparent sphere, smooth round, no obvious bubbles or impurities. Density: 2.4-2.6g/cm3 Reflective Index: 1.5 Composition: Sodium Calcium glass composition Si02: 62% Packing: 25kg / plastic waterproof woven bag In 1MT Big Bag

Glass Beads is a kind of wide application and speacial performance material.Our company specializes in industrial machinery shot peening, cleaning, polishing glass beads,advanced production technology to ensure the good quality of Glass Beads for sandblasting, the hardness, toughness and roundness of the products are higher than the industry standard, and reach the requirements of the national energy saving and environmental protection. Glass Beads Technical Data Sheet: Appearance: Colo Apearance: Colorless transparent sphere, smooth round, no obvious bubbles or impurities. Density: 2.4-2.6g/cm3 Reflective Index: 1.5 Composition: Sodium Calcium glass composition Si02: 62% Packing: 25kg / plastic waterproof woven bag In 1MT Big Bag

Glass Beads is a kind of wide application and speacial performance material.Our company specializes in industrial machinery shot peening, cleaning, polishing glass beads,advanced production technology to ensure the good quality of Glass Beads for sandblasting, the hardness, toughness and roundness of the products are higher than the industry standard, and reach the requirements of the national energy saving and environmental protection. Glass Beads Technical Data Sheet: Appearance: Colo Apearance: Colorless transparent sphere, smooth round, no obvious bubbles or impurities. Density: 2.4-2.6g/cm3 Reflective Index: 1.5 Composition: Sodium Calcium glass composition Si02: 62% Packing: 25kg / plastic waterproof woven bag In 1MT Big Bag

GLASS BEADS Glass Beads is a kind of wide application and special performance material.Our company specializes in industrial machinery shot peening, cleaning, polishing glass beads,advanced production technology to ensure the good quality of Glass Beads for sandblasting, the hardness, toughness and roundness of the products are higher than the industry standard, and reach the requirements of the national energy saving and environmental protection. Glass Beads Technical Data Sheet: Appearance: Colorless transparent sphere, smooth round, no obvious bubbles or impurities. Roundness: 80% Density: 2.4-2.6g/cm3 Reflective Index: 1.5 Composition: Si02: 62%

Glass beads, abrasives, sandblasting..

1) Product Introduction Glass beads for sandblasting has the features of chemical stability, high mechanical intensity and hardness. They can be� blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity.  2) Product Specification Main products specification for sandblasting according to following table: No. Diameter(um) Corresponding sieve size 1 850-425 20-40 2 425-250 40-60 3 250-150 60-100 4 150-105 100-140 5 105-75 140-200 6 75-45 200-325�  You can choose different size glass bead between 45um-850um according to different function. �  High Strength Glass Beads (for Blasting) With compressed air as implicit power, this product is made by sprinkling beads under high speed and pressure on the surface of workpiece for peening and polishing. Other purposes of the products are as follows: 1.� Clear diverse moulds of impact forging, forging, glass, rubber and plastic, metal casting and extrusion. 2.� Eliminate tensile stress, increase fatigue life and enhance stress corrosion resistance. For example, aircraft engine turbo, vane, shaft, undercarriage, diversified springs and gears, etc. 3.� Clean and remove slitter edge and burr on the circuit plate and plastic-sealed geminate transistors before stannum soldering 4.� Remove stems in the piston and cylinder and provide bright and half-lackluster surface for medical mechanical instruments and automobile parts 5. Clear electromotor and such parts as loop, electric brush and rotor of during heavy repair 6.� Clean up and remove burr of metal tube and precisely-melten non-ferrous metal tube. Be used for peening aggrandizement and polishing of textile machinery parts. �  High Strength Glass Beads for blasting Type Mesh Grain Size �¼ m 30# 20-40 850-425 40# 30-40 600-425 60# 40-60 425-300 80# 60-100 300-150 100# 70-140 212-106 120# 100-140 150-106 150# 100-200 150-75 180# 140-200 106-75 220# 140-270 106-53 280# 200-325 75-45 3) Technical references  Appearance: Clean and transparent, no visible bubbles and impurity. Density:2.4-2.6g/cm3 Hardness:6-7(Moh's) Spherical beads: 75% SiO2 content: 72% 4) Package 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm; the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25±0.2kg. 2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is paper-plastic compound bag to prevent leak or damp. The net weight of each is 25±0.2kg. 3.According to clients' requirement.

1) product function Reflective glass beads can improve the retro-reflection property of the road marking line. Driving at night, the headlights shines on the road marking line with glass beads, the light of headlights is reflected back parallelly. So the driver can see the road ahead clearly, and drive safely at night. 2) product specification: Jt/ t446-2001 no.1, 2, 3; Ksl 2521 no.1 and 2; Bs6088 class a and b; Aashto m247 type 1 and type 2; En1423 and en1424; Ts en1423; As/ nzs2009: 2002; Cns; jis r3301; australian standard a, b, c, d. According to the client's request. 3) technical information, Appearance: clean, transparent, no obvious impurity Composition: soda lime glass Density: 2.4-2.6g/cm3 Refractive index: 1.51-1.64 Roundness: 80% (600< sieve size< 850um, spherical beads>80%) Content sio2 >68% Hardness (moh's): 5-7 4) packing: 1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25±0.2kg. 2.Using double-deck package, the inner is polythene fim and its thickness is not less than 0.5mm, the outer is brown paper(3layers) bag to prevent leak or damp. The net weight of each is 25±0.2kg. 3.Using double-deck package, the inner is polythene fim and its thickness is not less than 0.5mm, the outer is plastic woven bag to prevent leak or damp. The net weight of each is 1000±8kg.

Reflective glass beads for road marking, coated glass beads, glass beads for sandblasting, glass beads for grinding.