8GE POE+2SFP.
Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.
Comply to POE IEEE 802.3af/at standard, all ports standard testing.
Support POE IPC camera, POE WIFI AP, and POE IPPHONE.
Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure.
Auto MDI/MDIX.
Upstream port lightning protection.
MAX 30W, MAX power 120W.
Store-and-forward.
All ports support wire speed switch, jumbo frame transmission.
Zero QFD, self-adaption.
Panel lights can monitor operative mode and malfunction analysis.
Specifications:
Electric Port
1000M POE 8
SFP 2
Function
Exchange Mechanism Store-and-forward
Exchange Capacity 16G
MAC 4K
Environmental
Working Temperature:0?~40?
Storage temperature :-40?~70?
Working Humidity :10%~90% RH non-condensing
Storage Humidity:5%~90% RH non-condensing
POE IEEE802.3af/at, MAX 30W, MAX power 120W
power DC52V 2.5A AC 110~220V 50/60HZ
Network protocol
IEEE 802.3X
IEEE 802.3i 10BASE-T X
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T G
IEEE 802.3z 1000BASE-X G
IEEE 802.3af /IEEE 802.3at
IEEE 802.3x Flow control
POE1602SFP-3 is applied to POE IPC camera, POE WIFI AP, and POE IPPHONE, and easy for network transmission.
This device comes with SFP port, easy for optical fiber remote transmission.
Main Features
16GE POE+2SFP, with different modules, can up to 100KM.
Comply to IEEE 802.3?IEEE 802.3u?IEEE 802.3ab?802.3X?802.3z.
500M CPU, 52G bus
Comply to POE IEEE 802.3af/at standard, all ports standard testing.
Support POE IPC camera, POE WIFI AP, and POE IPPHONE.
Fluid Control: Full-duplex: IEEE 802.3x, Half-duplex: back pressure.
Auto MDI/MDIX.
Upstream port lightning protection.
MAX 30W, MAX power 300W.
Store-and-forward.
All ports support wire speed switch, jumbo frame transmission.
Zero QFD, self-adaption.
Panel lights can monitor operative mode and malfunction analysis.
Specifications:
Electric Port 1000M
POE 16
SFP 2
Function Exchange
Mechanism Store-and-forward
Exchange
Capacity 52G
MAC 8K
POE IEEE802.3af/at, MAX 30W, MAX power 300W
power AC110-265V 50/60HZ 2.5A
Network protocol IEEE 802.3X
IEEE 802.3i 10BASE-T X
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T G
IEEE 802.3z 1000BASE-X G
IEEE 802.3af /IEEE 802.3at
IEEE 802.3x Flow control
IEEE 802.1q VLAN Bridge operation
Default
Mode Common switch
Match VLAN isolation
Power1, 2(+);3, 6(-) (endspan)
Data1, 2-tx; 3, 6-rx
Power supply modedetect pd, then power support
Otherselectromagnetic compatibility ce class b/fcc part15, class b/vcci class b/c-tick
Safety normsce/lvd
Operating temperature0¡ã¡a40¡æ
Operating humidity10%-90%, non-condensing
Physical
Auto mdi/mdi-x on each port to simplify integration into a network complies with the ieee802.3, ieee802.3u, and ieee802.3ab features store-and-forward mode with wire-speed filtering and forwarding rates ieee802.3x compliant fullduplex flow control led indicators for simple troubleshooting .
AS PS ABS PLA HDPE Granules
Acrylonitrile - styrene copolymer.
Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as
engineering plastics.Excellent heat resistance and solvent resistance.
Application.
1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases.
2. Special grade: blade of fan, batteries housing, lighters.
3. Refrigerator Sleeves, Miscellaneous
4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling
5. High Transparency, Heat Resistance, chemical resistance
PC + Glass Fiber reinforced (GF)
The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating
improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm.
Grade: (ML3410-30 / MH3515-30 / MN-3110-30)
1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF)
General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact.
Application: Watch parts, switches and nobs, OA equipment.
2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF)
Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage
and dimensional stabilities.
Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames.
3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF)
MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance,
surface aesthetics and weld line strengths.
Applications: Meter cases, electrical and electronic housings.
1506 Gigabit Fiber Poe Switch For Cctv Suppliers
Short on time? Let Gigabit Fiber Poe Switch For Cctv sellers contact you.
Distributor, wholesaler and Stockist of complete range of CCTV, Biometric Machine, Video Door Phone, Automation, EPABX, Digital Safe, Digital Lock, IT Services and All Accessories.
Distributor, wholesaler and Stockist of complete range of CCTV, Biometric Machine, Video Door Phone, Automation, EPABX, Digital Safe, Digital Lock, IT Services and All Accessories.
PRODUCT FEATURE:-
Plastic 5Ã??10/100Mbps auto-MDI/MDIX
High Speed Networking
Support IEEE802.3x
Operating Temperature10 C ~ 45 C (14 F ~ 113F)
LED Indicator Power 10/100Mbps Link/Act
Full/Half Duplex for Ethernet/High Ethernet Speeds
Plug-Play Installation
Compact Design
1. With 4x10/100/1000BaseT(X) PoE ports, and 1x1000BaseX SFP slot
2. Up to 30 watts output of each PoE port
3. Smart PoE over current and short circuit protection
4. Intelligent power consumption detection and classification
5. Redundant dual 48 VDC power inputs,
Built-in over-current protection, Reverse connection protection
6. -40 to 75C operating temperature range (WT models)
7. No fan, low consumption, industrial design standard,
industrial grade electronic components,
environmental protection & lead-free production
8. Hard aluminum alloy case(Not sheet metal),DIN-rail and wall mounting
9. IP Rating up to IP40
10. No packet lost in 72 hours full load traffic testing
1. With 8x10/100/1000BaseT(X) PoE ports, and 2x1000BaseX SFP slot
2. Up to 30 watts output of each PoE port
3. Smart PoE over current and short circuit protection
4. Intelligent power consumption detection and classification
5. Redundant dual 48 VDC power inputs,
Built-in over-current protection, Reverse connection protection
6. -40 to 75C operating temperature range (WT models)
7. No fan, low consumption, industrial design standard,
industrial grade electronic components,
environmental protection & lead-free production
8. Hard aluminum alloy case(Not sheet metal),DIN-rail and wall mounting
9. IP Rating up to IP40
10. No packet lost in 72 hours full load traffic testing
1. With 4x10/100/1000BaseT(X) PoE ports, and 2x1000BaseX SFP slots
2. Up to 30 watts output of each PoE port
3. Smart PoE over current and short circuit protection
4. Intelligent power consumption detection and classification
5. Redundant dual 48 VDC power inputs,
Built-in over-current protection, Reverse connection protection
6. -40 to 75C operating temperature range (WT models)
7. No fan, low consumption, industrial design standard,
industrial grade electronic components,
environmental protection & lead-free production
8. Hard aluminum alloy case(Not sheet metal),DIN-rail and wall mounting
9. IP Rating up to IP40
10. No packet lost in 72 hours full load traffic testing
1. With 8x10/100/1000BaseT(X) PoE ports, and 1x1000BaseX SFP slot
2. Up to 30 watts output of each PoE port
3. Smart PoE over current and short circuit protection
4. Intelligent power consumption detection and classification
5. Redundant dual 48 VDC power inputs,
Built-in over-current protection, Reverse connection protection
6. -40 to 75C operating temperature range (WT models)
7. No fan, low consumption, industrial design standard,
industrial grade electronic components,
environmental protection & lead-free production
8. Hard aluminum alloy case(Not sheet metal),DIN-rail and wall mounting
9. IP Rating up to IP40
10. No packet lost in 72 hours full load traffic testing
Flyin optronics’ 1x2 mechanical optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical proprietary configuration and activated via an electrical control signal.
All flyin optronics’ 1x2 mechanical optical switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for optical network, protection, transmitter and receiver protection, network test system and instrumentations.
Features
Unmatched low cost
Low insertion loss
High channel isolation
High stability, high reliability
Epoxy-free on optical path
Latching and non-latching
Applications
Optical network
Protection/restoration
Optical singnal routing
Configurable optical add/drop
Transmitter and receiver protection
Network test system
Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic
switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4
gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules.
It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports.
Created by Stephen Technologies Co.,LTD, The STE-228-X3X1 is a layer 2 fiber switch that offers along with multiple layer 3 features. The STE-228-X3X1 fiber optic
switch is especially designed for telecom grade applications. It offers 24 10/100mbps fiber(SM or MM fiber), together with 4
gigabit combo ports. The combo ports of STE-228-X3X1 can be either 4 port gigabit copper, or 4 port gigabit sfp/gbic modules.
It can also be configured as 2 10/100/1000Base-Tx ports, plus 2 gigabit SFP module ports.
LNK-1400P-SFP Series 10/100Mbps copper to fiber switch provides IEEE 802.3af/at Power Sourcing Ethernet (PSE) functionality on the 4 twisted pair ports, supplying both data and electric current to devices such as WiFi access points, VoIP phones and IP security cameras.
It is an ideal solution when PoE-powered network devices need to be installed further than the 100 m / 300 ft. LNK-1400P-SFP supports 100M Ethernet Port and 100M SFP Port. The Ethernet port supports both half-duplex and full-duplex mode. Users can use different type of SFP modules (single-mode/multi-mode fiber, 1/2 core) as needed.
Standard Packaging: Carton packaging(Support customer Logo)
1.Compliant with IEEE 802.3af/at
2.Supporting 10/100 Base-T applications
3.4 POE ports with classification identify
4.Total power budget 60W and up to 30W per port
5.POE Power Priority
6.Supports duplex mode (Half/Full) auto-detection
7.LED-indicates for LNK/ACT and Power status
8.Plug and play installation
What this product does
5-port gigabit switch with 4-port poe provides the seamless network connection. it integrates 1000mbps gigabit ethernet and 10/100mbps fast ethernet network capabilities.
How this product works
4 of the 5 auto-negotiation rj45 ports (port-1 to port-4) of the switch support power over ethernet (poe) function. these poe ports can automatically detect and supply power with those ieee 802.3af/at compliant powered devices (pds). in this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as aps, ip cameras or ip phones, etc.
Easy to use
Wi-ps305g is easy to install and use. it requires no configuration and installation. with outstanding performance and quality, the wi-ps305g 5-port gigabit desktop switch with 4-port poe is a great selection for expanding your home or office network.
