1. Drilling machine full hydraulic drive, easy operation and flexible, easy to shift, good mobility, saving time and effort; 2. Drill rotator with dual hydraulic motor drive, the output torque, greatly improving the drilling rig rigidity; 3. The new angle mechanism makes the hole more convenient, adjust the scope of larger, can reduce the requirements of the face; 4. With a dedicated drill pipe with drill (drill pipe, sleeve, eccentric drill, etc.), in the unstable formation with casing wall openings, conventional ball teeth drill hole; 5. The rig can be directly connected with the hydraulic station, the structure is simple; the hydraulic station frame is equipped with a roller, which is easy to move and relocate. The engine is composed of three parts: host, hydraulic station and console.
Product Introduction 1. Drills up to 100-200m deep, 75-500mm diameter. 2. Full hydraulic system and crawler mounted, easy to operate and move. 3. Drill on soil, sand, rock, quarry, marble and any hard ground. 4. Used to drill for water well, geological exploration, soil sample taking, SPT Test, etc. Main features 1. Hydraulic-control drill mast,can be raised and put down by hydraulic cylinders, which saves time and worker labor. 2. Rubber track, the weight is lighter and does not hurt urban road, suitable for projects in city. 3. Four hydraulic jacks, can lift the machine to mas height 1.3m, so that the machine can be loaded from truck compartment. Also they can be used for rig leveling and support at work. 4. 24V electric-start diesel engine reduces the operator's labor intensity. 5. Independent BW-160 mud pump , has bigger flow displacement and pressure, easy maintenance. 6. Optional installation of hydraulic twist tube machine(75-168mm)imporve work efficiency and reduce labor costs.
Product Description: 1.general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2.With hydro-automatic feeding device, and high drilling efficiency. 3.Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4.Close levers, convenient to operate, safe and reliable operations. 5.Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6.Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas. Product Parameter: rated drill depth 200m open hole diameter 200mm, max. 300mm spindle rotation speed 118/236/505/1010 rpm max. output torque 1500 N.m max. lifting weight (single wire) 17 KN drill rod diameter 42/50 mm hole angle 90~75º size (L x W x H) 1433 x 697 x 1273mm weight 500 kg diesel model S1100
Product Application: Drilling water well, geological exploration and road and railroad construction and building engineering construction project. hydraulic drilling rig is a new type of core drilling rig which is developed especially to meet the need of various drilling process mainly in diamond drilling, the power machine of which can be either motor or diesel engine. Product Advantage: 1. This machine gained 3 national practical new-type patents invention. 2. To be equipped with hexagonal vertical shaft and hexagonal drive drilling rod, with strong rigidity and big transfer torque. 3. To be provided with cone plate friction clutch, being facile to operate, with big transfer torque. 4. To adopt rolling bearing type hoist, with wide brake band and big lifting capacity. 5. To be equipped with speed reducer and sludge pump, being integrated structure. 6. The entire machine is featured by strong adaptability, high motive power, low cost and broad compatibility. 7. To be provided with hydraulic control pressure feed mechanism for the purpose of improvement of construction efficiency. 8. To use hydraulic control well head displacement mechanism for enlargement of initial hole diameter.
Product Description: xy-2 is a core drilling rig for middle and shallow hole. It applies not only to alloy and diamond core drilling with different calibres but also can be used for geological prospecting works, drilling of fluid mineral in superficial layer and shot holes and ventilation holes drilling, drilling on hydrology, water wells and big calibres. It has been widely used on areas such as road and railway construction, water resources and hydropower and architecture. Product Feature: With hydraulic automatic feeding device, elevated drilling efficiency. The holding mechanism with upper spherical jaws is used as substitute for chuck. The rod can be replaced without shutdown. Centralized handles, easy operation, safe and reliable. The drilling machine, pump and diesel engine are installed on a common base frame in order to have a compact structure and occupy small field area. 5 lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.
Used for general investigation, geophysical exploration, highway and building construction, and blast-hole drilling etc. With hydro-automatic feeding device, and high drilling efficiency. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. Close levers, convenient to operate, safe and reliable operations. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas
Tough, robust geological exploration drilling rigs equipped with a range of features for safe and highly efficient drilling in remote areas of difficult terrain. It is small-sized and flexiable for easy operation. Here are the mainly types we offer: Type: ST-200 Drill Depth: Max. 200m Hole Diameter: 300mm Max. Speed: 1010 Weight: 620kg Drill Rod: 42 or 50mm
Brand: HUANYU Model: XY-200 Drilling depth: 0 - 200 meter Weight: 730KG Hole diameter(Soil): 200-400mm Hole diameter(Rock): 75 - 170mm Water Well Drilling or Take rock core sample in mining exploration, geological survey. XY-200 drilling rig is a multiple purposes light drilling rig. XY-200 is a model developed on the basis of XY-1A, which is integrated with a hydraulic tower system. The rigs are widely used for geological engineering investigation in various projects like water well, industrial and civil construction, railway, bridge, hydropower etc., and also for small diameter pile hole boring and anchor hole drilling. Features: 1): wide range of R.P.M. and well-set gear 2): large torque in low R.P.M., suitable for core drilling and piling hole drilling and piling hole works. 3): mobile cylinder installed so that the drilling machine has a free travel of 400 mm, ensure easy operation of drilling stems 4): easy to handle, high efficiency, oil hydraulic feeding 5): stable and solid drilling tower with fewer single components. Easy for transportation and flexible in drilling angle adjustment (features of hydraulic tower, model XY-200) 6): optimized structures, small volume and light weight.
Product Features: Spindle type mechanical transmission, hydraulic feed. Hydraulic retracting lets drill body away from the drilling hole. Hydraulic chuck, hand-powered chuck and hand-powered cylinder chuck, they are exchangeable. Friction hoist, percussion drilling, easy to pull and push casing if equipped with vibrator. Advanced design, reasonable arrangement, compact structure, beautiful looking. Light weight, good detachability, easy to operate. Equipped with special 6mA type derrick for user ordering. Product Parameter: Drilling depth 200m Hole(Drill bit) diameter (mm) Φ115-350 Adaptable formations Loose soil and bedrock (Hardness f=6~20) Drilling method Top drive rotation, hydraulic feeding, work with mud pump or DTH hammer Rotary speed (rpm) 60�160 Torque (N.m) 5000�6500 Feeding force (Ton) 8 Lifting force (Ton) 16 Tool winch lifting force (Ton) 1.5 Drill pipe dia. Φ76/Φ89 Drill pipe length 3000 Air pressure (Mpa) 1.05-2.46 Air consumption (m3/min) 16-35 Diesel engine YN33GBZ Engine parameter 65kW/2400rpm Walking speed 0�2.5 Climbing capacity 20 Distance from ground 250 Dimension (mm) 4000x1900x2600 Unity weight (kg) 6000
Product description The ST-200 drilling rig is a lightweight shallow hole rig with oil pressure feed. Suitable for census exploration, geophysical exploration, road and building exploration, and small well drilling. 1. It has automatic hydraulic feeding mechanism to improve drilling efficiency and reduce labor intensity. 2. The use of ball card type clamping mechanism, can achieve non-stop bar, easy to operate, safe and reliable. 3. The handle is concentrated, easy to operate. It is equipped with a bottom pressure gauge to indicate the pressure, which is convenient for grasping the inside of the hole. 4. Compact structure, the drilling machine, water pump and power machine (diesel or electric motor) are assembled on the same base, occupying a small area of the airport. Light weight, high decomposability and easy to move.
Product Applications: 1.Construction drilling of the projects e.g. prospection, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction 2. Coal mining exploration, Ore exploration 3. Small hole diameter water well drilling 4. Geothermal pipe-installing for heat pump 5. Small-diameter hole foundation piling drilling;
Product Features: 1. Integrated crawler traveling device, mud pump, control panel into one whole; 2, Caterpillar walking, base support, mast landing are all driven by the hydraulic system of drilling rig, it is easy to operate; 3. It is easy to move around and from or to at work site, improve the drilling efficient, and reduce the intensity of labor; 4. Mast landing, folding function for easy walking and transportation. 5. Have more speeds (8-speed), reasonable speed range, and big torque at lower speed, wide applications; 6. Having two reverse speeds, it is easy to handle the accidents. 7. The feed stroke of spindle is 600 mm, help to improve drilling efficiency, reduce blocking and burning of bit, easy to handle drilling accidents. 8. Twin-gear oil pump to supply oil for the hydraulic system of drilling rig, less power consumption, lower temperature of the hydraulic system. 9. Few control levers, reasonable layout, flexible and reliable manipulation. 10. Have normally a closed hydraulic chuck, also equipped with a lower mechanical manual chuck.
This equipment is a kind of full multifunctional and steady function deep core drilling rig.It suitable for alloy/diamond core drilling,widely used for exploration and gelogical survey,construction project,water-power engineering project,highway,railway and seaport drilling project.Also suitable for drill a water well . Advantage of this machine: 1. Adopt auto vehicle transmission and cluth,good speed gear,easy operation. 2. Taper clutch with outstanding transmission torque, easy operation and maintenance-free features 3. With light structure,easy disassemble,convenient to move. 4. Four sets of bearing positioning of the vertical axle box ensure that the gyrator has sufficient rigidity to deal with complex geological conditions such as gravel layer and pebble layer.
Supply Ability: 50 sets per Month Air consumption: 17-35 M3/min Dimension(L*W*H):5500*1950*2780mm One-timeadvance 6.6m length: Depth: 300 Meters Warranty of core 1.5 years components: Key Selling Points: Competitive Price Drilling Depth: Max.300m Walking speed: 2.5kw/h Machinery Provided Condition: New Power Type: Diesel Usage: Water Well Place of Origin: China Warranty: 1 Year Keyword: deep water well drilling rigs Weight: 9000kg,9000 KG Brand Name: YUXINGHUA Hole diameter: 140-325 Mm Video outgoing-inspection: Provided Type: Rotary Drilling Rig Core Components: Pressure vessel,Gearbox Marketing Type: New Product 2020 Applicable Industries: Garment Shops,Building Material Shops,Manufacturing Product name: Rotary Drilling Rig Model: FY300 Drilling Diameter: 140-325mm Packaging Detail: water well rotary drilling machine Standard Container
Product Application 1.Construction drilling of the projects e.g. prospection, geotechnical investigation, railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction; 2. Coal mining exploration, Ore exploration; 3. Small hole diameter water well drilling; 4. Geothermal pipe-installing for heat pump; 5. Small-diameter hole foundation piling drilling Product Feature: 1. Used for general investigation, geophysical exploration, high-way and building construction, and blast-hole drilling etc. 2. With hydro-automatic feeding device, and high drilling efficiency. 3. Designed with hydro-chucking unit instead of slips to ensure drilling from stop when changing pipes. 4. Close levers, convenient to operate, safe and reliable operations. 5. Compact in structure. All the drill, water pump and diesel engine installed on one base frame result in space-saving. 6. Light in weight, easy disassembling for transportation and applicable to working conditions in plain and mountain areas.
Product Feature: 1. With a hydraulic feeding mechanism, the pump mechanism and the reverse function, improve drilling efficiency, reduce labor intensity. 2. The rig is equipped with a ball with a cassette holding mechanism of six-party initiative to drill, can implement non-stop down the pole, high efficiency, safety and reliability. 3. bottom hole pressure gauge with pressure, easy to grasp hole situation. 4. handle centralized, easy to operate. 5. Compact rig structure, small size, light weight, easy to disintegration and handling, for the plains or mountain areas. 6. vertical shaft to form structures Plus, vertical through-hole diameter increased by a larger diameter drill, better adapted to high torque transmission. 7. The electric start diesel engine, convenient and secure.
1.Brief introductions of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is modified and designed on the basis of SH30 exploration drilling rig. The exploration drilling rig can be used for the covering layer of fourth Century, such as soil, clay, sand and gravel, and all kinds of mixed soil and fill. It is mainly used in the exploration of gold sand, industrial buildings and civil buildings as well as highway, railway, bridge and other engineering geological prospecting work. 2.Features of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is simple operate and has high degrees of mechanization. With light weight, compact structure, good disintegration performance and convenient handling, the SH30-2A exploration drilling rig can be removable in the mountain area and is equipped with a pair of rubber wheels. The machined can be towed between different drilling holes on constructions site. . 3.Applications of SH30-2A exploration drilling rig The SH30-2A exploration drilling rig has two kinds of drilling methods: impact and rotation. Therefore, the drilling tools of the drilling machine are divided into two kinds: impact tools and rotary tools. In order to meet the customer's individualized demand, the drilling tools are equipped in accordance with the demand , and the standard configuration does not include the rotary drilling function. 4.Impact tool of SH30-2A exploration drilling rig The tools used for impact drilling include lifting joints, weighting rods, impact rods, guiding pipes and impact drills. When the soil sample is used, the drilling tool used is the same as above, but only the impact bit is changed into a soil sampler. Using sand cylinder for sand gravel and other tools are lifting joint, rod, movable joint, sand lifting cylinder. When drilling in sand and pebble layer, casing must be lowered to protect the hole wall and prevent collapse. With complete free chain clamp c 5.Rotary tool (Not include in standard configuration). Rotary Table, Auger Drilling Pipe, Rotary Table Pipe Adapter, 6.Specifications of SH30-2A exploration drilling rig SH30-2A exploration drilling rig Drilling depth 30m Drilling pipe diameter 42mm Aperture diameter 142mm End hole diameter 110mm Drill form and vertical height 4 legs, 6m Power Motor Y132S2-2/ 7.5kw/3000 r/min Diesel engine D180Z/ 8hp/2400 r/min Windlass Lifting speed 0.24/ 0.57/1.48m/s Maximum lifting power (single rope, low speed) 15kn Turntable Diameter 150mm Turntable speed 18/44/110r/min Dimension Length*width*height 1780*1010*900mm Weight 500kg
Weight indicator suitable for drilling and geological exploration drilling rig or workover process instructions and record the drilling hanging weight and WOB change, it can help drillers to master the working parameters and judge the working state of drilling tools. Weight indicator by the deadline anchor, weight secondary table weight indicator and recorder.The instruments work environment temperature 40 50 Features Can be used the drilling rig, workover drilling rig etc Hydraulic and electrical, Two types horizontal and vertical Easy to operate
1.Brief introductions of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is modified and designed on the basis of SH30 exploration drilling rig. The exploration drilling rig can be used for the covering layer of fourth Century, such as soil, clay, sand and gravel, and all kinds of mixed soil and fill. It is mainly used in the exploration of gold sand, industrial buildings and civil buildings as well as highway, railway, bridge and other engineering geological prospecting work. 2.Features of SH30-2A exploration drilling rig SH30-2A exploration drilling rig is simple operate and has high degrees of mechanization. With light weight, compact structure, good disintegration performance and convenient handling, the SH30-2A exploration drilling rig can be removable in the mountain area and is equipped with a pair of rubber wheels. The machined can be towed between different drilling holes on constructions site. . 3.Applications of SH30-2A exploration drilling rig The SH30-2A exploration drilling rig has two kinds of drilling methods: impact and rotation. Therefore, the drilling tools of the drilling machine are divided into two kinds: impact tools and rotary tools. In order to meet the customer's individualized demand, the drilling tools are equipped in accordance with the demand , and the standard configuration does not include the rotary drilling function. 4.Impact tool of SH30-2A exploration drilling rig The tools used for impact drilling include lifting joints, weighting rods, impact rods, guiding pipes and impact drills. When the soil sample is used, the drilling tool used is the same as above, but only the impact bit is changed into a soil sampler. Using sand cylinder for sand gravel and other tools are lifting joint, rod, movable joint, sand lifting cylinder. When drilling in sand and pebble layer, casing must be lowered to protect the hole wall and prevent collapse. With complete free chain clamp c 5.Rotary tool (Not include in standard configuration). Rotary Table, Auger Drilling Pipe, Rotary Table Pipe Adapter, 6.Specifications of SH30-2A exploration drilling rig SH30-2A exploration drilling rig Drilling depth 30m Drilling pipe diameter 42mm Aperture diameter 142mm End hole diameter 110mm Drill form and vertical height 4 legs, 6m Power Motor Y132S2-2/ 7.5kw/3000 r/min Diesel engine D180Z/ 8hp/2400 r/min Windlass Lifting speed 0.24/ 0.57/1.48m/s Maximum lifting power (single rope, low speed) 15kn Turntable Diameter 150mm Turntable speed 18/44/110r/min Dimension Length*width*height 1780*1010*900mm Weight 500kg