Ge Ic693Pwr321 Suppliers and Manufacturers

Fixed carbon 99% min. Sulphur 0.03%max. Ash 0.5% max. Volatile matter 0.5% max. Moisture Size (mm) HQ-GES-01 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1

Diammonium phosphate, commonly referred to as (DAP 18-46), is the world's most used phosphate fertilizer. As a primary nutrient, DAP helps the plant to capture and convert the sun's energy into useful compounds for the plant. It also stimulates root development and enhances the durability of the stems. Usage: In addition to its wide usage in the agricultural sector, DAP is also used to impregnate matches, and as a flame-retardant (for fighting forest fires).

Rock Phosphate is a mineral feedstock to produce phosphate fertilizers and phosphoric acid. Usage: Rock phosphate does not dissolve easily in water, making it difficult for plants to assimilate. Chemical conversion via phosphoric acid produces phosphate fertilizers, such as DAP, MAP and other ammonium phosphates, which are more easily assimilated by plants.

Paraffin waxes in a solid state are usually white, translucent, tasteless and odorless. They are hard, relatively brittle and have a slightly dry feel. In a molten state, paraffin waxes are clear, colorless liquids of low viscosity. When melted, these waxes increase in volume by about 5-8%, resulting in a decrease in density. Paraffin will react at high temperatures with either oxidizing or halogenating agents. This reaction produces either fatty acids and hydroxy acids or halogen substitution products respectively. Although paraffin has many useful characteristics, most commercial applications are based on its resistance to water and vapor and its glossy appearance when polished.

Fuel oil is any of various fractions obtained from the distillation of petroleum (crude oil). Such oils include distillates (the lighter fractions) and residues (the heavier fractions). Fuel oils include heavy fuel oil (bunker fuel), marine fuel oil (MFO), furnace oil (FO), gas oil (gas oil), heating oils (such as home heating oil), diesel fuel and others. Fuel oil has many uses; it heats homes and businesses and fuels trucks, ships, and some cars. It is often used as a backup fuel for peaking power plants in case the supply of natural gas is interrupted or as the main fuel for small electrical generators.

Potassium Sulfate (K2SO4) is Suitable to be used for fruit trees orchards before planting or during winter service to feed all kinds of crops especially during fruit stage to increase fruit size and improving taste, firmness and shelf-life. Standard formula takes longer time to be completely dissolved in soil compared to soluble-SOP, which make potassium more available for plant for long time and increases K-use efficiency. Enhances tolerant of plants against environmental and biotic stresses. Rich in Sulfur, which is an important element for some oil crops such as onion and garlic and increases the availability of phosphorus and micro element to be used in soil.

CALCICOATTM calcium chloride (CaCl2) is a white, high purity granules with 94 to 97 weight percent CaCl2. It has the following features when compared to its nearest competitor: When sprayed, the shape of granules makes them more controllable than powder shape. Higher concentration of calcium chloride gives a higher heat of dissolution, promoting faster melting and higher penetration rate as a deicer. CALCICOATTM Calcium chloride is used in petroleum industry as drilling mud additive and drying petroleum fractions, in cement manufacture to low alkali and acting as a source of chloride. To melt the Highway ice for sidewalks, parking lots and driveways. This high energy should be sprinkled lightly and evenly over ice surfaces at an application rate of about 2 pounds per 200 square feet. Thawing begins immediately.

DCP is a DiCalcium phosphate Dihydrate product, with the formula CaHPO4.2H2O, with minimum 18% P content and up to 25 % Ca content. Dihydrate means 2 molecules of water inside the phosphate and higher digestible product. The product has the highest digestibility of any DiCalcium phosphate one can find in the market. Purity is closely correlated with bio-availability of phosphorus. In the traditional process the more contaminated are the raw material, the more indigestible elements the feed phosphate will contain. This is not the case with our used processing technology. DCP is the best option to be easily used with compound feeds, premixes, and concentrates to cover the nutritional requirements of both phosphorous and Calcium in poultry, ruminants, pets, and aquatic animals.

Linear alkylbenzene (LAB) is found in all kinds of detergent formulations like for household, laundry, dishwashing. (LAB) is a basic raw material to produce linear alkylbenzene sulphonic acid (LAS). After neutralization it is the most common active ingredient in biodegradable detergents. Heavy Alkyl Benzene (HAB) is a by-product in the process of linear alkyl benzene (LAB) production. It is the main raw material for lubricants, metal surface treatment products, including galvanic and electroplating products and Hydraulic fluids.

Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Different products require different compositions and properties in the oil. Chemical substances additives are added to the base oil to meet the quality requirements for the end products in terms of, for example, friction and cleaning properties.

The fertilizer numbers, which are always in the same order (N-P-K), tell you how much nitrogen, phosphorus, and potassium are in the fertilizer. They may be whole numbers or decimals and might be the same number, like 10-10-10, but often are three different numbers. Itâ??s even possible to have one or two of the numbers be zeros. The numbers are a percentage of how much of each nutrient is in the fertilizer. Since the numbers are a percentage by weight, the higher the number, the more of that nutrient there is in the fertilizer. A 20-20-20 fertilizer has twice as much NPK in it as a 10-10-10 fertilizer.

Urea ammonium nitrate solution, commonly referred to as UAN, is a liquid nitrogen fertilizer which is made up of a mixture of urea, ammonium nitrate and water. Nitrogen fertilizer is responsible for the production of amino acids and proteins and indirectly supports the production of vitamin B. Nitrogen application is the main factor to improve plant growth, development and yield of all crops. Usage: The use of modern crop application methods of UAN are designed to provide very precise application of UAN to the crop. Furthermore, UAN applications can provide better economics for the farmer than dry fertilizer applications because the farmer can add other crop protection products like herbicides, insecticides and fungicides to the UAN and can be applied to the crop in a single application.

Aqueous Urea Solution or diesel exhaust fluid (DEF) reduces harmful NOx emissions from diesel engines and enable diesel passenger cars to comply with the Euro 6 exhaust standard. AdBlue, DEF & ARLA 32 are the global alternative brands for Aqueous Urea Solution products (AUS). Our supply of Aqueous Urea Solution is mainly directed to our clients in Europe.

Urea is the highest nitrogen (46 %) content fertilizer that makes it one of the most vital fertilizers for crops in agriculture. Our supply of Urea from Egypt and MENA region reaches the shores of North America, LATAM countries, Asia, and Europe (Reach Number is available). Product Characteristics: Nitrogen: 46% min. Moisture: 0,5% max. Granulometry granular (between 2 - 4 mm): 90% min.

HS Code 15122990 PRICE = US$ 1,100 CIF ORIGIN: SOUTH AFRICA MIN ORDER: 200 TONS Description: A virgin liquid oil derived from a specific variety of sunflowers grown in New Zealand, particularly high in monounsaturated fatty acids for nutritional products. The oil is virgin and pressed under a cold pressing process. Oil temperature is a maximum of >36 degrees C at the time of oil extraction Typical Analysis: Free Fatty Acids 0.2 0.4 Peroxide Value (meq/kg) 10 30 Colour Bright Gold Moisture (%) 0.10 max Flavour / Odour Typical, bland Stearic Acid (C18:0) (%) 3.0 6.0 Oleic Acid (C18:1) (%) 78.0 82.0 Linoleic Acid (C18:2) (%) 8.0 15.0 Linolenic Acid (18:3) (%) 0.0 0.2 All results at time of manufacture Composition: High Oleic Sunflower Oil (NZ) Origin: SOUTH AFRICA GM Status: This product is GE FREE and does not require Genetic Modification labelling Nutritional Data: Average Quantity Per 100g Energy 3696kJ Protein 0g Fat Total 99.9g Fat Saturated 6g Fat Monounsaturated 82g Fat Polyunsaturated 12g Fat Trans 0g Carbohydrate Total 0g Carbohydrate Sugars 0g Sodium 0mg Packaging: 20l Drum, 200l Barrel, 1,000L pod or Bulk, Flexi-container Storage: Clean, dry areas away from heat and odorous products Shelf Life: Dependant on packaging Bulk 12 months from date of manufacture under ideal storage conditions 1,000L 12 months from date of manufacture under ideal storage conditions