South Korean Frp Gratings Suppliers and Manufacturers

FRP products like pole & rebar.

Frp fishing vessels, frp leisure boats, diverse type of frp ships.

Steel flat bar, i bar, serrated flat bar, serrated i bar, cross bar, steel gratings.

1.Model: ST-100, ST-140, ST-80, ST-12, 2. Capacity: Capacity 250T per a day, 140T per a day, 80T per a day, 12T per a day 3.Configuration: Flow rate tank - Anaerobic tank - Cultivation tank - Intermittent aeration tank - Precipitation tank - Discharge tank 4.Option: UV sterilizer / Flow meter 5.Features: Remove organic compound, nitrogen and phosphorus simultaneously, Strong against shock load of influent water / Excellent processing efficiency / Easy maintenance / Excellent odor removal Mechanism 1. High efficiency of treatment (BOD 98%, t-n 83%) 2. Self-purification of stream by indigenous microorganism in the discharged water 3. Relief effect of mosquito larva 4. Advantageous when using the dehydrated cake as manure 5. Increase of applicability for the change of impact load (flow rate, water quality, temperature) 6. Prevent the civil complaints due to the removal of bad odor (less than environment standard, as a result of analysis by KIST) 7. Increase of sludge precipitation by indigenous microorganism 8. Experiment of mosquito relief using the indigenous microorganism

Steel gratings, glass wool, steel angles, bars, plates, wire mesh fences, welding wires....Etc. For construction materials..Trading

Plc splitter module, plc splitter chip, rackmount type splitter & osm module, arrayed waveguide grating (awg), v-groove chip & fiber array, patchcords, attenuators, coupler, variable optical attenuator.

Product name75A Engine Mounted Spray Carrier ModelSOL-AE117-4 Standard Four-cycle Gasoline Engine Key Start-Up 4.8 (kW) 75ABody-Auto High-Pressure Hose(10 x 100M) Tank 200 (L) Dimension 1200cm x 1000cm (W) x 1300cm (H) Weight115(kg) Application Used for forest-fire fighting, sterilizing barns, facility houses, government offices, and floor cleaning MaterialSteel square pipe, antirust painting treatment, FRP tank FeaturesA tank and a high-pressure sprayer integrated equipment and moveable type Fixed front wheel 12 rear wheels-powered sprayer mounted with autopressure controller, eight pieces of rotating bearings, Keyang 710 Key Start-Up engine, FRP tank

FRP Boat, Masks, Gloves.Trade

Isocyanates, unsaturated polyester resin, alkyd resin, amino resin, polyester resin, vinyl ester resin, water born resin, UV resin, FRP, button.

Magnetic separator, non ferrous metal separator, eddy current separator, electromagnetic filter, grate type magnet, magnetic bar, magnetic filter, suspended magnetic separator, overbelt magnetic separator, wet drum magnetic separator, drum magnetic separator, pulley magnet, magnetic assembles, woodchips automatic separating line, msw recycling automatic sorting system, automatic and manual sorting machine, line and system for recycling and recovery..Transportation and shipping

Prefabricated SIP house, prefabricated FRP house.

Surfacing Tissue Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology. Packaging Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets. Stroge Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.

Model : FRP plastic cover Standard: Flexible Configuration: FRP & Steel frame Features: In general, the role of the sewage treatment plant is to reuse the factory waste water, living waste water, livestock waste water generated from factory, home and fields and the polluted water through separate treatment process and discharge them to river or sea. For this processing of sewage or waste water in the sewage treatment plant, it is required to install the plastic cover on the top of storage tank to prevent the harmful gas or bad odor generated in the tank that stores the waste water and purifies microorganism by chemical reaction or in the process of waste water treatment in the above tank. The installation of this plastic cover is to remove the harmful gas or bad odor and minimize the physical and mental damage of the related people in the working place or residents.

Chopped Strand Mat Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder. Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof shoot, Autonitive parts, bathroom equipment and cooling towers. Product Features 1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products. 2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter. 3.Excellent flexibility ensures good moldability with no spring-back at sharp corners. 4.Fast and consistent wet-out speed resins and rapid air release reduce resin consumption, improving manufacturing costs, productivity and mechanical properties of the end products. 5.The composite products have high dry and wet tensile strength and good transparency. General Data Binding type : Powder or Emulsion; Densily : 85-900g/m2; Width : Max.3300mm, Tapes available. Edge : 1 or 2 untrimmed edge available upon request.

EXCELLENT PERFORMANCE Maximum efficiency 98.4%, battery efficiency 98% Maximum 15kW PV input power, continuously 10% output overload, 150% unbalance output Maximum Charge/Discharge current SOA Large MPPT current, compatible with high-power solar panels Advanced parallel function   HIGH RELIABILITY Key components from international famous brands IP65 protection rating, good adaptability to complex outdoor environ- ment Multiple protections built-in, optional AFCI, RSD     Max. Efficiency (PV to AC) 98.20% 98.40% 98.20% 98.40% Euro. Efficiency (PV to AC) 97.20% 97.90% 97.90% Max. Efficiency (BAT to AC) 98.00% 98% Input(PV) Max. PV Input Power 9,000W 1OOOV 15,000W 30000W 1000V 45000W Max. PV Voltage 150V 150V Start-up Voltage 160V-950V 160V-950V MPPT Voltage Range Max. Input Current 15A/15A 20A/30A 30A/30A 30A/30A/30A Max. Short Circuit Current 20A/20A 3 30A/40A 40A/40A 40A/40A/40A Nos. of MPPT 2 3 String per MPPT 1-Jan 1/2/2023 2-Feb 2/2/2002 Input/Output (BAT) 8 9 Battery Type Lithium-ion, Lead-acid Lith umion/Leadacid Nominal Battery Voltage 250V-600V 420V-800V 320V-800V Battery Voltage Range 150V-600V 150V-800V Max. Charge/Discharge Current 25A/25A 50A/50A 50A/50A 2*50A/2*50A Max. Charge/Discharge Power 9,ooow/5,800W 15,000W/11,300W 24,000W/ 22,680W 30,000/ 34,000W Output (Grid) Nominal AC Output Power 5,000W 10,000W 20,000W 30,000W Max. AC Apparent Power 5,500VA 11,000VA 22,000W 33,000W Max. AC Output Power (PF=1) 5,500W 11,000W 22,000VA 33,000VA Max. AC Output Current 3*8.3A 3*16.7A 3*33.4A 3*50.1A Max. Single Phase Power 2,500W 5,000W 10,000W 11,000W Max. Input Power 15,000VA 30,000VA 4S,000VA Max. Input Current 3*25A 3*50A 3*75A Rated Grid Voltage 380V/400V/415V,3W+N+PE 380V/400V/415V,3W+N+PE Grid Voltage Range 260V-520V (Adjustable) 277V-520V (Adjustable) Rated Grid Frequency 50Hz/60Hz 50Hz/60Hz Grid Frequency Range 45Hz-55Hz/55Hz-65Hz (Adjustable) 45HZ-55Hz/55Hz-65Hz (Adjustable) Power factor >Ã?  0.99 grated power (Adjustable 0.8 LD - 0.8 LG) >Ã? Ã?  0.99 @rated power (Adjustable 0.8 LD - 0.8 LG) THDI <5% (Rated Power) <3% (Rated Power) Output (Back up) Nominal Output Power 5,000W 10,000W 20,000W 30,000W Nominal Output Current 3*7.6A 3*15.2A 3*30.3A 3*45.5A Max. Single Phase Power 2,500W 5,000W 10,000W 11,000kW Peak Power (Smin) 6,000VA 12,000VA 24,000VA 36,000VA Peak Power (10s) 7,500VA 15,000VA 30,000VA 4S,000VA Nominal Output Voltage 380V/400V/41 IV, 3W+N+PE 380V/400V, 3W+N+PE Nominal Output Frequency 50Hz/60Hz 50Hz/60Hz Transfer Time 1Oms 1Oms (typical) THDV <3% (R Load) <3 (R Load) Protection Protection Category Class I DC Switch Yes Anti-islanding Protection Yes AC Over Current Protection Yes AC Over Voltage Protection Yes AC Short Circuit Protection Yes DC Reverse Protection Yes Surge Arrester DC Type II, AC Type II PV Insulation Detection Yes Leakage Current Protection Yes AFCI Optional RSD Optional General Max. Operation Altitude 4000m (>2000m derating) 4000m (>2000m derating) Protection Degree IP65 IP66 Operating Temperature Range -25Ã?°C -60â??C (>45Ã?°C derating) -25 % -60 % (>45 % derating) Relative Humidity 0-100% 0-100% Cooling Natural Cooling Natural Cooling Smart Fan Cooling Mounting Wall bracket Wall bracket Dimensions (W*H*D) 530mm*550mm*212mm 660mm*570mm*230mm Weight 30Kg 32Kg 45Kg 55Kg PV Connection MC4/H4 MC4/H4 HMI & COM Display LED+APP, LCD(Optional) Communication Interface S485/CAN (for BMS), RS485, RS48S (for Meter), DRMs, 2â??DI (1 for RMO), 2â??DO, Optional: Wi-Fi/GPRS/LAN Certification Grid VDE-AR-N4105, IEC 61727/62116, AS 4777.2, EN 50549-1, C10/11, G99, CEI 0-21, NRS 097-2-1, RD 1699/661/413 Safety iEc 62109-1 &2 EMC EN 61000 Warranty S Years

Microchips like memory , systems , mems ,etc , fire proof mesh snt 1000 for cables .Distributors