Appearance: Colorless to pink crystal Purity (hplc): 95.0 %, 98.0 % Boiling point: 298c Melting point: 112 - 116c Density: 1.203g/ml at 25 c(lit.) Flash point: 151c Solubility: Insoluble in water, slight soluble in ethanol, soluble in benzene, carbon disulfide, easily soluble in ether and glacial acetic acid Risk mark: Risk codes: S24/25 Un no.: Un 3077 Packing: 25kg/fiber drum with the lining of plastic film 25kg fiber drum with the lining plastic film
Fluoren-9-One(CAS:486-25-9)
2-bromo-9H-fluorene(CAS:1133-80-8)
Indene, mixed methylnaphthalene, technical naphthalene, quinoline, isoquinoline, industrial acenaphthene, fluorene.
Oled chemical intermediates boric acid, phenol, carbazole, fluorene, anthracene, naphthalene, thiophene, pyridine, indole, organic phosphorus series, palladium, ruthenium, rhodium, iridium catalyst and other advanced materials nano silver.
Coal chemical products (fine chemical intermediate):, quinoline, isoquinoline, dimethylquinoline, indolone, indene, 2 indanone, methylnaphthalene, methylnaphthalene, mixed methylnaphthalene, industrial acenaphthene, industrial fluorene, anthraquinone, carbazole, pyridine, refined naphthalene, industrial naphthalene.Export
Molecular Formula: C23H30 Molecular Weight: 306 Intermediate of many kinds of insecticide, indanthrene dye and plastic. 9, 9-Dimethyl-9H-fluorene, 9, 9-Dimethyl-2-iodofluorene, 9, 9-dimethyl-2, 7-di-t-butyl-4-bromafluorene are also available .
Naphthalene series, anthracene series, phenanthrene series, fluorene series etc.The main products are l-malic acid , dl-malic acid, l(+)-tartaric acid, l-aspartic acid, fumaric acid, maleic acid and other organic acids.
UIV CHEM Nano-silver disnifectant With the advent ofnanotechnology,silvers sterilizing ability has been highly improved,Very few nano silver has strong bacterical effect.it can kill more than 650 kinds of bacterical and viruses in few minutes.the antibacterial nano-silver disnifectant which UIV CHEM researches and developes. Tested and verified by serveral third parties,within 1 min has a 99.99% kill rate against E.coli,Staphylococcus aureus,Candida albicans,Coronavirus and H1N1,H3N2 Flu virus,Its a new generation of safe and non-toxic antibacterial disnifectant Application Suitable for various antibacterial,disnifectant in homes and public place Spary evenly at a distance of 20cm from the sterilization article,dry naturally without cleaning and wiping,The dosage can be sdjusted according to personal needs Ingredients Nano-silver ion ,deionized water
Pure Acenaphthene Molecular Formula: C12H10 CAS NO. :83-32-9 EINECS:201-469-6 UN: 3077 9/PG 3 Main application: 1. Dye, plant growth hormone, germicide, insecticide production 2. Synthetic dyes, polyester resins, polyester fibers, can also be used to make fluorescent pigments, pharmaceuticals, insecticides, etc. 3. Dehydrogenation of acenaphthene to produce acenaphthene resin.
Naphthalene Molecular Formula: C10H8 CAS NO. : 91-20-3 EINECS: 202-049-5 UN: UN 1334 4.1/PG 3 Main application: Naphthalene is the most important condensed cyclic hydrocarbon in the industry, mainly used in the production of phthalic anhydride, various naphthols, naphthylamine, etc.,Produce of synthetic resins, plasticizers, dye intermediates, surfactants. The raw material of Synthetic fibers, coatings, pesticides, pharmaceuticals, perfumes, raw materials for rubber additives and pesticides. Physicochemical properties: Appearance: White crystal flake Purity: >99% Refractive index: 1.5821 Flashing point: 174 °F Vapor pressure: 0.03mm Hg ( 25 °C) Storage condition: The warehouse is ventilated at low temperature and stored separately from oxidants and acids. Melting point: 80-82 °C(lit.) Density: 0.99 Water solubility: 30 mg/L (25 ºC) Boiling point: 218 °C (lit.)
2-Methylsuccinic acid Molecular Formula: C5H8O4 CAS NO. :498-21-5 EINECS:207-857-1 UN: NONE Main application: Soldering paste.For organic synthesis, used in pesticides, pharmaceuticals, petrochemicals, etc. Physicochemical properties: Appearance: White to beige powder Purity: >99% Refractive index: 1.474 Flashing point: 111.1 °C (Literature data) Vapor pressure: 0.0162 mm Hg ( 25 °C) Storage condition: Stable. Combustible. Incompatible with bases, oxidizing agents, reducing agents. Melting point: 110-115 °C(lit.) Density: 1.4105 g/mL at 25 °C(lit.) Boiling point: 236.5 °C (760 mmHg)
Pyridine Molecular Formula: C5H5N CAS: 110-86-1 EINECS203-809-9 UN: 1282 3/PG 2 Main application: Used in the manufacture of vitamins, sulfonamides, pesticides and plastics. Used as an alkaline solvent in the chemical industry and laboratory. Used as catalysts for polymerization, oxidation, carbonylation of acrylonitrile, etc. It can also be used as stabilizer of silicone rubber and raw material of anion exchange membrane. Used as a corrosion inhibitor. Used as an analytical reagent, widely used as a solvent, liquid chromatography eluent. Also used in organic synthesis. Physicochemical properties: Appearance Transparent and clean liquid with a distinctive smell Purity 99.9% Refractive index n20/D 1.509(lit.) Stability Stable, flammable, incompatible with strong oxides and strong acids Flashing point 68°F Vapor pressure 23.8mmHg at 25°C Storage condition The warehouse is ventilated at low temperature and stored separately from oxidants and acids. Melting point -42 °C(lit.) Density 0.983 g/mL at 20 °C(lit.) Boiling point 96-98 °C(lit.) Packing200kg Galvanized steel drum for packing and transportation
Cresol Molecular Formula: C7H8O CAS: 84989-04-8 EINECS284-892-9 UN: UN 2076 6.1/PG 2 Main application: Used in medicine, plastics, pesticides and paint industries, also used as a imaging agent. Physicochemical properties: Appearance Colorless or yellow liquid Purity 99% Flashing point 82°F Storage condition The warehouse is ventilated at low temperature and stored separately from oxidants and acids. Density 1.04 Packing200kg Galvanized steel drum for packing and transportation Email:
Phthalic anhydride Molecular Formula: C8H4O3 CAS NO. : 85-44-9 EINECS201-607-5 UN: 2214 Main application: Phthalic anhydride is an important organic chemical raw material, mainly used in the production of plastic plasticizers, alkyd resins, dyes, unsaturated resins and certain pharmaceuticals and pesticides. Currently widely used in chemical, pharmaceutical, electronics, agriculture, coatings, fine chemicals and other industrial sectors. Physicochemical properties: Appearance White crystals with a choking odor Purity 99.9% Refractive index 1.646 Stability Incompatible with strong oxidants, strong bases, moisture, and strong acids. Dust may mix with air to form an explosion. Flashing point 152°C Vapor pressure 0.01mmHg at 20°C Storage condition The warehouse is ventilated at low temperature and stored separately from the oxidant. Melting point 131-134 °C(lit.) Density 1.53 g/cm3 at Boiling point 284 °C(lit.) Packing: 25kg woven bags or cardboard drums are packed and shipped
Phenol Molecular Formula: C6H6O CAS: 108-95-2 EINECSï¼?203-632-7 UN: UN 2821 6.1/PG 2 Main application: Phenol is an important organic chemical raw material. It can be used to produce phenolic resin, caprolactam, bisphenol A, salicylic acid, picric acid, pentachlorophenol, 2,4-D, adipic acid, phenolphthalein n-acetoxyaniline and other chemical products and intermediates. It has important applications in chemical raw materials, alkyl phenols, synthetic fibers, plastics, synthetic rubber, pharmaceuticals, pesticides, perfumes, dyes, coatings and oil refining. In addition, phenol can also be used as a solvent, experimental reagent and disinfectant. An aqueous solution of phenol can separate proteins on the chromosomes of plant cells from DNA, and facilitate DNA staining. Physicochemical properties: Appearance Transparent crystalline solid Purity 99.5% Refractive index n20/D 1.53 Stability Stable, flammable, burning danger in case of open fire, high temperature and strong oxidant Flashing point 175°F Vapor pressure 0.09 psi ( 55 °C) Storage condition Ventilation in warehouse, dry at low temperature, separate from oxidizer Melting point 40-42 °C(lit.) Density 1.071 g/mL at 25 °C(lit.) Boiling point 182 °C(lit.) Customs Data: H.S. NO. 2907111000 Packingï¼?200kg Galvanized steel drum or tank for packing and transportation Email: sales02@realongchem.com(Nicole King)
Cresol Molecular Formula: C7H8O CAS: 84989-04-8 EINECSï¼?284-892-9 UN: UN 2076 6.1/PG 2 Main application: Used in medicine, plastics, pesticides and paint industries, also used as a imaging agent. Physicochemical properties: Appearance Colorless or yellow liquid Purity 99% Flashing point 82°F Storage condition The warehouse is ventilated at low temperature and stored separately from oxidants and acids. Density 1.04 Packing 200kg Galvanized steel drum for packing and transportation Email:
Methylnaphthalene (1-Methylnaphthalene) Molecular Formula: C11H10 CAS NO. :90-12-0 EINECS:201-966-8 UN: 3082 Main application: Make surfactant, a auxiliaries for synthetic fiber dyes, an emulsifier for pesticides, a plant growth stimulating agent α-naphthyl alcohol, a water reducing agent, a dispersing agent, and raw material for drug. Physicochemical properties: Appearance: Colorless or light yellow liquid with blue fluorescence Purity: 97% Refractive index: 1.613-1.616 Stability: Stable. Combustible. Incompatible with strong oxidizing agents, oxygen. Flashing point: 82ºC Storage condition: The warehouse is ventilated at low temperature and stored separately from the oxidant. Melting point: 22 °C Density: 1.025 Boiling point: 240-243 ºC
Methylnaphthalene(2-Methylnaphthalene) Molecular Formula: C11H10 CAS NO. :91-57-6 EINECS: 202-078-3 UN: 3077 9/PG 3 Main application: Used as a surfactant, water reducer, dispersant, drug etc. Raw materials for organic synthesis of pesticides, pharmaceuticals, dye intermediates, etc. Physicochemical properties: Appearance: slight yellow crystal or a slightly yellow transparent liquid Purity: >98% Refractive index: 1.6019 Stability: Stable. Incompatible with strong oxidizing agents. Flashing point: 208 °F Storage condition: warehouse ventilated at low temperature,stored separately from the oxidant. Melting point: 34-36 °C Density: 1.01 Water solubility: 0.00246g/mL Boiling point: 241-242ºC (lit.)
1H-Indole Molecular Formula: C8H7N CAS NO. :120-72-9 EINECS:204-420-7 UN: 2811 6.1/PG 3 Main application: Widely used in the manufacture of spices, pesticides, and pharmaceutical industries. Physicochemical properties: Appearance: White crystals have an unpleasant smell Purity: >97% Stability: Stable, but may be light or air sensitive. Incompatible with strong oxidizing agents, iron and iron salts. Refractive index: 1.68 Flashing point: >230 °F Vapor pressure: 0.0298 mm Hg ( 25 °C) Storage condition: 2-8ºC Melting point: 51-54°C(lit.) Solubility: 2.80 g/L (25 ºC) Density: 1.22 Boiling point: 253-254 °C (lit.)
