Float Valve Spares Sfdn80 Pacitan Power Suppliers and Manufacturers

Brass Ball Float Valve Pressure Rating : PN-10 Material : Forged Brass Description : Brass Lever with Plastic Ball Ends : Screwed Female to BS:21 Item Code : FLB00066 Size : 15mm Notes : Available Valve Size : 15mm to 50mm

Gun Metal Ball Float Valve Pressure Rating : PN-10 Material : Gun Metal Description : Rough Body with Plastic Ball Ends : Screwed Female to BS:21 Item Code : GM000066 Size : 15mm Notes : Available Valve Size PN-10 15mm to 100mm PN-16 15mm to 100mm PN-20 15mm to 100mm PN-25 15mm to 100mm

Cast Iron Equilibrium Float Valve Pressure Rating : Class-125 Material : Cast Iron / Ductile Iron Description : Double Beat Type, Rubber Seated Trim : Cu Alloy, Copper Float Ends : Flanged Item Code : CI000052 Size : 40mm Notes : Available Valve Size : 40mm to 300mm

Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process. Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products. Parameters 1.process arrange diameter of round shape onion 30-150mm. 2.capacity 1000-1500kg/h 3.Power 3kw 4.Voltage 380V 5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw 6.Machine size 1.5*1.3*1.4m 7.Weight 420kg Start working flowing: 1.Fill onion in the loading box 2.Start the pneumatic valve switch 3.Start the power-supply switch 4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin 5.When finished adjusting ,The equipment operates normally and automatically.

Apple washing peeling remove seeds half cutting in-one-machine, also can process pear and other same fruits and vegetables. Parameters : Number of valve openings: determined by the user Production capacity: 45-50 pcs/min, 16 plugs (one circle) Peeling thickness: 1.1-1.3 mm adjustable Suitable fruit diameter: 65-120 mm remove seeds diameter: 22 mm (can be determined according to user requirements) Peel removal rate: 95 % or more . (normal apples, non rotten fruits, dry scars, irregular fruits.) Excluding both ends. Total power of equipment: 2.25 kw Equipment specifications: host; 1800 * 1050 * 2100, auxiliary equipment 3300 * 1200 * 900 Equipment weight : 850 kg Equipment gas consumption: 0.65 m3/min Advanced technology : small area,efficient,sanitary,easy operate and clean,saving labor costs . Apple process machine apple machinery fruit machinery ,pear /apple/round fruits/vegetable peeler, fruit process machine ,apple/pear peeling machinery ,apple /pear seeds remove machine/machinery Canned apple /pear /fruits making machine applesauce making machine applesauce process machinery /equipment, apple ring making machine ,apple production line apple plant ,apple/pear half cutting machinery

Features: Full Facepiece Respirator Large lens for wide field of view Lightweight, balanced design Silicone face seal for greater comfort and durability Characteristics Double exhalation valve; Low respiratory resistance; The transmission device design make the information transfer more clear Used Oil, Machine maintenance, Construction, Gas ,Electric power, Shipbuilding, Transport, Mine, Chemical plant, but not for radioactive high toxic particulate matter.

Hydraulic hoses & couplings Hydraulic pumps, fittings, cylinders & filters Manifolds & accessories Pneumatic cylinders, filters & regulators Pneumatic fittings & pipes Pneumatic valves: mechanical, proportional & manual Boosters & regulators

Gate Valves Wafer Valves Knife gate valves Non-return valves Pressure relief valves Actuators Positioners

Floating cable which can be applied to underwater robot equipment, either in fresh water environment or in seawater environment. It is widely used in marine exploration robot, underwater ROV UAV remote control submersible, underwater camera, underwater construction, underwater search and rescue robot, pipeline detection robot, submersible pump and the link between various underwater electrical equipment and shore based equipment; Link of signal transmission, power supply and equipment control system from underwater to water.

Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline

Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline

Product Description And Specification; 1. Dry charged battery & MF battery. 2. Meet all DIN & JIS standard. 3. Powerful quick scrap used car batter. Product Feature; (1)Maintenance-free operation. There is no need to check specific gravity of the electrolyte or add Water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leak proof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. Fe Content (%): 100%) Battery features; - Sealed and maintenance free operation battery - Non- Spill able construction design. - ABS Containers and Covers (UL94HB), UL94V-0 optional. - Safety valve installation for explosion proof. - High quality and high reliability. - Exceptional deep discharge recovery performance. - Low self-discharge characteristic. - Flexibility design for multiple install positions. - No memory effect. - CE certificate. - Wide operating temperature range. Battery Application; -Solar system - Alarm System - Cable Television - Communication Equipment - Control Equipment - Security System - Medical Equipment â?? UPS - Power Tools - Toys - Emergency Power System - LED Lig

Bronze Spare Cone For Fusible Plug Rating : 250 PSIG (17.24 Bar) Steam, Melting Temperature of Fusible Alloy 270 C Material : Bronze Description : Two Piece Design Ends : Screwed Specials : IBR Item Code : BM000084 Size : 15mm Notes : Available Valve Size : 15mm to 50mm