Swing gate turnstile is mainly used for pedestrian entrance and exit management. The general application site only allows personnel to pass, including personnel tow the baggage, and the disabled person.
Size: 1200*185*980 mm
Pass Speed: �¢?�¤35 people/min
Pass Width: 600-900 mm
Input Voltage: 110240VAC, 50HZ
Working Voltage: DC24V
Material: 1.5 / 1.2 mm 304 Stainless steel
STXtek Flap barrier gate turnstiles are constructed to control people entering or exiting the restricted area. It is usually used in high pedestrian traffic flow locations in both directions.
Size: 1200*280*980 mm
Pass Speed: 35 people/min
Pass Width: 550 mm
Input Voltage: 110 240VAC, 50HZ
Working Voltage: DC24V
Material: 1.2 / 1.0 mm 304 Stainless steel
Aneiz F10 flap turnstile-Support OEM and ODM. Support third-party biometric devices, such as fingerprint scanner, face recognition camera. RFID card reader, QR code scanner.
Aneiz F10 flap turnstile is a high performance pedestrian control turnstile. Usually used in high pedestrian traffic flow in both directions to control pedestrian entry or exit in restricted areas
304 Stainless steel material, durable, high quality, for long lasting use.
The F10 features designed with standard relay signal, which can integrate easily to any kind of access control and fire systems through I/O (dry contact).
In case of emergency, when power goes off both directions are free.
Passing Direction: Single directional / Bi-directional.
FEATURES
Aneiz F10 flap turnstile -The panels of the flap turnstile extend from a pair of optical revolving door cabinets, forming a pedestrian barrier in the middle of the two cabinets. Flap turnstile is an aesthetically pleasing security and access control solution.
Aneiz F10 flap turnstile -The arms will automatically retract during power failure. Flap turnstile also can be triggered to permanently open during emergency to facilitate fast evacuation. This is complying with fire safety requirements.
Aneiz F10 flap turnstile -Altogether, there are 5 million cycles, 304 Stainless steel material and brushless DC motor, which guarantee greater durability and longer equipment life.
Aneiz F10 flap turnstile -The turnstile designed with consolidated and more durable mechanism, will not break even someone collide it, anti-collision and anti-kick function.
Aneiz F10 flap turnstile -The flaps will close automatically if there is no pedestrian passing or passenger delay to entry.
IR sensors detect unauthorized or abnormal access. Alarm buzzer function will be triggered when the user is passing thru without authorization, tail gaiting, illegal intrusion or incorrect direction.
Aneiz F10 flap turnstile -Multiple Operating Modes-optional
IC/ID card, key fob, QR/bar code, face / fingerprint / finger vein biometric recognition, push button, ESD, wireless remote control, insert coins / card / wristband, digit counter...
Aneiz F10 flap turnstile TECHINCAL SPECIFICATION
Material 304 Grade Stainless Steel
Cabinet Dimension 1200(L) X 300(W) X 980(H)mm
Arm Material Plexiglas-transparency
Passage Width 550mm standard lane
Throughput 40 to 45 people per minute
Response Time â?¤0.3S
Net Weight 65kg/pcs single core
85kg/pcs double core
Directional Mode Uni-directional or bio-directional
IR Sensor 3 pairs (standard)
Power Supply AC220V/110V, 50/60Hz
Power Voltage 24V DC
Power Consumption 40W
MCBF 5 million
Operating Temperature -20 �°C - 75 �°C
Operating Environment Indoor or outdoor (need with shelter)
Relative Humidity 95%
LED Indicators Red cross means gate open,
Green arrow means gate closed
Warranty 18 Months
Metal detectors, walk through gates, handheld metal detectors, tripod turnstiles, flap barriers, swing gates, barrier gates, highway traffic barriers, road blockers, full height turnstiles.
Product Details:
Model DW-370
Voltage 220 V
Motor Speed 1400 rpm
Brand Magtech
Weight 600 kg
Gate Speed 12 m/min
Protecting Class IP44
Output Speed 46.6 r/min
Magnetic limited switch, control and protect the travel.
Aluminous die-casting parts, ensure solidity and lasting power
In case of power failure, the gate can be opened and closed manually after release clutch.
STXtek swing gate turnstile is mainly used for pedestrian entrance and exit management. The general application site only allows personnel to pass, including personnel tow the baggage, and the disabled person. Considering that the swing gate can achieve wider lane characteristics than the flap turnstile gate. Most of the swing barrier gates can be used to pass through some non-motorized vehicles such as pedestrians, bicycles, mopeds and handicapped vehicles. Swing gates turnstiles are suitable for elegant and luxury entrance solutions. Its unique features and extensible functions allow it to integrate with any access control system.
Size: 1400*185*1020 mm
Pass Speed: â?¤35 people/min
Pass Width: 600-900 mm
Input Voltage: 110240VAC, 50HZ
Working Voltage: DC24V
Material: 1.5 / 1.2 mm 304 Stainless steel
STXtek Tripod turnstiles are three-arm turnstiles. It is specially used for the opening and closing of personnel exits and entrances. They are designed to control access into or out of a point of entry by only allowing a single person access at a time. These rugged turnstiles are very common and are used for a variety of projects.
Size: 1200*280*980 mm
Pass Speed: 25 people/min
Pass Width: 550 mm
Input Voltage: 110 240VAC, 50HZ
Working Voltage: DC24V
Material: 1.2 / 1.0 mm 304 Stainless steel
X ray baggage scanner, boom barrier, walk through metal detectors, rolling shutter motor, flap barrier, tripod turnstile, swing gate motor, sliding gate motor.Manufacture
STXtek Swing gate turnstile is mainly used for pedestrian entrance and exit management. The general application site only allows personnel to pass, including personnel tow the baggage, and the disabled person.
Size: 1200*185*980 mm
Pass Speed: 35 people/min
Pass Width: 600-900 mm
Input Voltage: 110 240VAC, 50HZ
Working Voltage: DC24V
Material: 1.2 / 1.0 mm 304 Stainless steel
STXtek full height turnstile security gate is a type of pedestrian turnstile gate with the highest level security performance, which is consist of chassis and three or four rows of rotating rods.
STXtek Full height turnstile security gate is a type of pedestrian turnstile gate with the highest level security performance, which is consist of chassis and three or four rows of rotating rods.
1. Power Supply: AC220V¡À10V ,50Hz / AC110V¡À10V,60Hz
2. Temperature: -15 to 60 degrees
3. Humidity: <95%, without concretion
4. Passage Width: <=600mm
5. Passing Speed: 40 persons/min (IC Card)
6. Power Consumption: 100W
7. Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
8. Communication Interface: RS485 (Distance:<=1200m)
9. Material: Housing - 304 stainless steel arm - stainless steel
10. Dimension: 420*330*980 mm Arm Dimension:38*500mm
11.Working Environment: Indoors or outdoors with shed.
Functions and features:
1. Unique incomplete wheel transmission is adopted to make turnstiles held or unheld in zero position more accurate and reliable.
2. Running stable, little noise and no mechanical impact
3. Self-checking-power-on function, if power on,turnstile will auto get to be held.
4. Various working means can be set in the control panel menu, namely: bi-direction card reading passing, or one direction card reading passing and another passing limits, or one direction card reading passing and another free passing, etc.
5. If power off, arm will fall automatically while power on later, arm should be lift by hand. First press the arm with a little force and then lift it manually.
6. It is with RS485 connection for far control arm up and down to satisfy the special needs or fire control requirements.
7.It is with standard electrical interface to connect various kinds of readers and writers for easy integration and also computer far control and management can be realized by computer.
8. It will count the persons who have been passed through automatically and will show the number by LED directly.(LED is optional)
9. Passing direction will be shown by LED and passengers will know which direction is allowed to pass.
10. Card reading memory or card reading without memory function can be set in the control panel menu according to your request.
11. If working with software, the total-in-population can be set to satisfy special request.
12. Re-position function. After card reading, if passenger not through within the specific time, time and the limit passing time length can be set.
13. Card Mouting is avaliable.
14. Uncompleted wheel turning system is adopted for locking the turnstile in zero, and unlocking will be more reliable and accurate.
15. Optional:
1) Counter and counter display
2) Access controller or card reader.
3) Key by-pass.
Product Details:
Opening and Closing Times 1.5, 2, 3, 6 s
Housing Dimension 355x280x1050 mm
Wet Not Including Barrier Boom 50 kg
Motor Power Consumption 60 W
Brand Magtech
Frequency 50 hz
Voltage 220 V
Product Details:
BrandMagtech
Monitor TypeLCD
MaterialMild Steel
Power SourceElectric
A Toll Management System (TMS) is put in place to collect revenue and recover the capital outlay incurred on the cost of construction, repairs, maintenance, expenses on toll operation by concessionaires, private organizations to provide reduced travel time and increased level to service to end user. In the process of collection toll and user fee it is also important to maintain highest level of security as huge volumes of cash are being floated within toll plazas.
