Coke is a kind of main raw materials used for steel makers, with the advantages of low ash, low sulphur and high carbon. Our coke is well sold in European, American, Japanese and South-east Asian markets. Coke obtained from high temperature coking is used for blast furnace smelting, casting and gasification. Coke produced in the process of recovery, purification of coke oven gas is both high calorific value of fuel, but also an important organic synthesis of industrial raw materials. Name F.C. % S % Ash % V.M. % Moisture % min max NF-MC-01 83.5 0.8 13.5 1.8 7 NF-MC-02 86 0.65 12 1.2 5 NF-MC-03 86.5 0.6 12 1.5 5 NF-MC-04 88 1 10.5 1 5 NF-MC-05 85 0.6 12 1.5 5 NF-MC-06 85 0.7 13.5 1.7 6 NF-MC-07 84 1.3 13.5 2 5 NF-MC-08 85 0.8 13.5 1.5 5 NF-MC-09 85 1 13 1.5 6 NF-MC-10 86 0.7 12 1.5 5 Size (mm) 0-1,1-3 mm, 0-5 mm, 1-5 mm, 0-10 mm, 5-10 mm, 5-15 mm,10-15 mm, 10-30mm or at customers' option. RE Other specifications and sizes can be designed as per your requirement, if you need, don't hesitate to contact us. Application Coke is mainly used for blast furnace ironmaking and for the copper, lead, zinc, titanium, antimony, mercury and other non-ferrous metal blast furnace smelting, from the reducing agent, heaters and column skeleton role.
Product's name: Wood Charcoal Keywords: Flat cube charcoal,Flat cube burning,Lump charcoal , Lump Shisha Charcoal, Silver Charcoal. Specification as following: Specification: Grade A Material (Composition) 90% bamboo charcoal & 10% pure nature bonding Moisture Content less than 6% Fixed Carbon More than 85% Ash 4% Heat value 7000J-8000J Volatile Matter 2% Hardness 90% Temperature (Burning) 700-880°C Burning Time 4-5 hours Others feature smokeless,odourless,innocuity, no bursting it is an environment-friendly products , no any chemicals Size: hexagon shape square diameter outer diameter Æ 40mm 40x40mm inner diameter Æ 10mm Æ 10mm Length 18-25cm 18-25cm Weight (Average) 285g-295/pc 285-295g/pc
We are supplier and exporter of Petroleum Coke. Petroleum Coke are made from a mixing material of serval kinds of coal,under a high temperature(1300) process.They are widely used for steelmaking,ferroalloys manufacture or non-ferrous metals smelting,iron castings manufacture or other related metallurgical and foundry industry,because of its special physical and chemical characteristics:high strength and fixed carbon content,low sulfur and low volatile matter content.
COCONUT SHELL CHARCOAL Coconut shell charcoal briquette for BBQ Specification: Size: 50mmx50mmx30mm Fixed carbon 60 to 65 % Moisture below 5% Ash 10 to 15 % GCV 6000 to 6500 V matter 15-18% Packaging - 25 kg pp bags
Semi-coke is light black, characterized by high fixed carbon, high specific resistance, high chemical activity, low ash content, low sulfur and Low phosphorus It is wildly applied to such industries as chemical industry, metallurgic industry, and gas- making industry to produce calcium carbide, ferroalloy, ferrosilicon.
- Coconut shell stick Charcoal used for BAKHOOR OR BBQ - 28 MT ready for shipment. - Size 25mm dia and 50 mm length - cylindrical Shape. - 10 kg printed PP Laminated Bag. - 28 Tonnes in 40 Ft Container Specification: - Fixed carbon 70% and above - Ash - below 15% - Volatile matter - 13 to 14% - Moisture- below 5% - GCV- 6000 to 6500 CAL/Kg - Burning Time - 5 hours/kg
PRODUCT DETAILS : Size : Natural shape & Granulated Fixed Carbon : 78% & Above Ash : 3% Maximum Volatile Matter : 15% max Moisture : 10% max GCV : Above 7000 Kcal/kg Color : Uniformly Black Packing : 25 kgs, 50 kgs & 1-ton jumbo bags
PRODUCT DETAILS : Size Length : 50 mm x 50 mm x 25 mm Fixed Carbon : 60% to 65% Ash : 8% max Volatile Matter :16% to 18% Moisture : Below 5% GCV : 5000 to 5500 Kcal/kg Burning Time : 45 mins Packing : 2 KG , 5 KG Printed paper bag packing and 20 kg 5 ply master carton box.
Red cubes International has more than 20 years of experience in the charcoal industry. supplying the best quality products to many major companies worldwide. PRODUCT DETAILS : Size : 25 x 25 X 25 mm Fixed Carbon : 80% above Ash : 2% to 3% Volatile Matter : 12% to 14% Moisture : 3% to 5% Ash Color : White Burning Time : 90 Mins GCV : Above 7000 Kcal/kg Packing : 13 to 14 grams x 72 Pcs x 1 kg printed carton box x 10 boxes in 10 kgs 5 ply master corrugated box Containers : 17 Metric Tons in 20 ft Container - 1700 Boxes 28 Metric Tons in 40 ft Container - 2800 Boxes
Deals in activated carbon powder, granular activated carbon, sawdust, wood sawdust, biomass briquettes, white coal, iron ore, laterite, spices, raw salt, refined salt, bleaching earth, mill scale, hms scrap, low ash metallurgical coke, marine gypsum, silica sand,silica flour,quartz, hematite powder, bentonite powder, china clay, quartz sand, fly ash, kaolin clay.indonesian coal, South African coal, coke fines, ground granulated blast furnace slag ,coal based activated carbon,zinc ash,zinc dust,zinc,coal dust,earthing coal,coke breeze,talc powder,dolochar,gypsum powder, plaster of pairs, aggregate, marine gypsum, gypsum powder, pop & coke fines, washed marine gypsum,quartz powder excavator .
Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
About THE Product : Blast furnace slag is used in the production of cement (iron Portland and blast furnace cement). Air-cooled blast furnace slag is formed by allowing the molten slag to cool relatively slowly under ambient conditions; final cooling can be accelerated with a water spray. The cooled material is hard and dense, although it can have a vesicular texture with closed pores. After crushing and screening, air-cooled slag can be used in several applications. Granulated slag is formed by quenching molten slag in water to form sand-sized particles of glass. The disordered structure of this glass gives the material moderate hydraulic cementitious properties when very finely ground into granulated blast furnace slag, but if it can access free lime, the granulated blast furnace slag develops strong hydraulic cementitious properties. Pelletized or expanded slag is cooled through a water jet, which leads to rapid steam generation and the development of innumerable vesicles within the slag. The vesicular texture reduces the overall density of the slag and allows for good mechanical binding with hydraulic cement paste. Blast Furance Slag is a nonmetallic co-product which is produced in the process of iron manufacturing, Granulated Blast Furnace Slag is a glassy granular material formed when molten blast furnace slag is rapidly cooled by direct water. Rapid cooling prohibits the formation of crystals and forms glassy, non-metallic, silicates and alumino silicates of calcium. GBFS : (Granulated Blast Furnace Slag) Source : Granulated BF Slag From Gujarat State, India Supply Quantity : 50,000 Metric Tons Per Month Packing: Bulk Parameters (% BY MASS) CaO 30-38 Al2O3 15-20 SiO2 30-40 Glass Content 85-97 MgO 8-11 Fe2O3 0.5-1.5 Moisture 10 MAX Size -5mm Min 95, +5 mm Max 5 Relative Gravity 2.9 Bulk Density(Bagged) 1200 KG/M3
We supply the Quality Ferro Alloys Like Ferro Manganese HC / MC / LC Grade I II III Mn 65% min 70% Min 75% Min Si 2% Max 2% Max 1.50% Max C 8% Max 8% Max 8% Max S 0.05% Max 0.035% Max 0.03% Max P 0.40% Max 0.30% Max 0.25% Max MC FeMn Mn 70%Min /75% Min / 78% Min Si 1.50% Max C 1.50% MAX S 0.03% Max P 0.25% Max Ferro-Manganese Ferro-Manganese is an alloy with high percentage of Manganese, which is made by heating a mixture of the oxides MnO2 and Fe2O3 and coal & coke with high carbon content in a blast furnace or an electric arc furnace-type system. The oxides go through carbothermal reduction in the furnaces that result in producing the Ferro-Manganese. Ferro-Manganese is used in the production of steel which acts as an excellent deoxidizer and desulfurizer. We supply the one variant of Ferro Manganese: High Carbon Ferro-Manganese.
We supply the Quality Ferro Alloys Like Silico Manganese HC Grade I II Mn 60% min 65% Min Si 14% Min 15% Min / 16% Min C 2.50% Max 2% Max S 0.03% Max 0.03% Max P 0.30% Max 0.30% Max Silicon Manganese Size : 10 - 60 mm Mn; 65 to 70% Si : 16 %c : 2 % P : 0.15 % S : 0.01 % High Carbon Silico Manganese - Standard Grades Mn : 60% Min. / 65% Min. / 70% Min. Si : 15% Min. / 16% Min. / 17% Min. C : 2 % Max. P : 0.30 % Max. S : 0.03 % Max. Size: 10 - 60 mm
Wood Charcoal Details as Below. Burning Time: 5 - 7 hours Moisture: 6-8 % Fixed Carbon: 75-85% Calorific Value: 6500 to 7000 Kcal/kg Ash Content: 1.5-2 % Volatile Matter: 12.5 to 30% Sizes: 20mm to 100mm, 30mm to 200mm (based on your request) Shape: Lump / Briquettes / block Foreign Matter: 1 % made with physical methods, 100% pure hardwood No Chemical contents ph value :7-9 Our charcoal can be use for both open and closed fires. smokeless coal for domestic use. recommended room warmer& barbeque Shape: lump No traces of soil or other elements. Long life burning burn without any smoke or fume during the initial ignition and during burning duration.
Specification : Size : 2.5 & 2.2 or by request Material : 100% coconut charcoal Ash content : max 2.5% Ash color : white Moisture : 4-5% Fix carbon : min 80% Volatile matter : max 15% Calori : > 7500Kkal Price FOB include packing inner,smallbox and masterbox.
Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel. Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze). Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal. We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under: Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality. Complete combustion of coking coals resulting in almost negligible levels of pollution. Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications. We are planning to develop new trends as far as improved coke quality is concerned. Completely RCC coal & coke yard which ensures that the coke quality is maintained. Exclusive mechanized machines for exact sizing and screening of coke. Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke. We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys. We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven. Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required. The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.
Product: Hexagon Coco Charcoal Briquettes Analytical Analysis Specifications Test Method Moisture Content 8% max ASTM D2867 Total Ash Content 18% max ASTM D2866 Fixed Carbon 60% min Shape Hexagon Type Dimension 4x4x8 cm Binder Cassava Starch BF Industries, Inc. Cocoshell Charcoal Briquets is 100% coconut shell-based, which give benefits to the household, restaurant industry, and the environment. It is... compact, thus burns longer. hotter than ordinary charcoal. Spark-free smokeless as completely carbonized cocoshells are used. odor-free renewable environment-friendly no cutting of trees
Product: Pillow Shaped Coco Charcoal Briquettes Analytical Analysis Specifications Test Method MOISTURE CONTENT 8% max ASTM D2867 TOTAL ASH CONTENT 18% max ASTM D2866 FIXED CARBON 60% min SHAPE Pillow Type DIMENSION 5x5x2.5 cm BINDER Cassava Starch BF Industries, Inc. Cocoshell Charcoal Briquets is 100% coconut shell-based, which give benefits to the household, restaurant industry, and the environment. It is... compact, thus burns longer. hotter than ordinary charcoal. Spark-free smokeless as completely carbonized cocoshells are used. odor-free renewable environment-friendly no cutting of trees
