Fixation Device For Urethral And Drainage Tubes Suppliers and Manufacturers

Code 52110: For surgical wound drainage Features Nature rubber formation. Non-sterile. Smooth tubing wall, both outside & inside. X-ray opaque, ready to implant. Peel apart package. Length : 18(12 is also available) Diameter: 1/4, 3/8, 1/2, 5/8, 3/4, 1

Steel frame screens are mostly applied to the shale shakers with wedge fastening equipment. The screen frames adopt that high-strength square steel tube welded to multi-ribbed construction. They are sturdy and reliable. These screens are constructed with two or three stainless steel layers bonded to a steel support plank. Accessary rubber plugs may be used to repair rips or tears. By doing this, we can cut down time and reduce the production costs. We can supply steel frame screens with mesh sizes ranging from 20 to 250. Steel frame screen is in common used presently, that are constructed mostly withe two or three stainless steel layers bonded tightly to the steel frame.The frame is made up of the high-strength square steel tube or flat steel welded to multi- ribbed construction.These layers are coupled with the frame through metal backing plate or bonded straightly as well.We possess the strong experience and the ripe technology,and will provide various specifications of steel frame screens to serve the clients' demands. Features of Steel frame screen 1. Different layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better. 2.High strength frame, multi-ribs and the mesh cloth with moderate tension , from one reliable combination , which can increase screen�??s acceptable flow , the intensity and the lifetime 3.The wedge-shaped fastening device, can make the erection of screens more handily and quickly 4.The mesh divided into many independent small units by grids of the backing plate ,can prevent rips or tears from spreading overmuch. Accessory prepared rubber stoppers can be used to repair damage. By doing so, the operator can cut down the stop time and reduce the cost.

Code 85750: Anchor wound dressings on fragile or at-risk skin Features Anchors wound dressings on fragile or at-risk skin. Secures tubing and devices. Gentle yet secure, waterproof and snug fit. Color: Flesh Tear type: Easy-tear or normal Size: 2.50 cm x 150 cm 5.00 cm x 150 cm

Y Junction Set / T.U.R. Set Product Code: MED 132 Specifications: Sterile, individually packed in peelable blister pack Size/Strength: Tube Length as per requirement Description â??Yâ?? Junction set / T.U.R. Set (Trans Urethral Resection Set) designed for continuous irrigation during trans urethral resection. Y shaped connector facilitates alternative changes of solutions. Slide control clamp aids quick changes of bottle Proximal end fitted with flexible latex tube allows easy connection to endoscope Non-Toxic and Pyrogen-Free

Infant Feeding Tube Product Code: MED 184 Specifications: Sterile, individually packed in peelable pouch pack Size/Strength: 4-10(length 52 cm) Description Manufactured from nontoxic, medical grade PVC compound. Distal end is smooth coned shape for nontraumatic intubation. Two lateral eyes for efficient drainage. The tube is marked at 20 cm from the distal end for accurate placement into the abdomen. Radio opaque line provided throughout the tube for X-ray visualization. Proximal end is provided with luer mount for connection with feeding device. Also, available with graduation. Marking from the tip 5 cm to 40 cm.

Covidien ABSTACK30 Absorbatack Fixation Device Part # ABSTACK30 Exp 3/19 Covidien ABSTACK30 Absorbatack Fixation Device is an absorbable tack fixation device, for use in laparoscopic hernia repair. The NEW AbsorbaTack (ABSTACK30X) fixation device for laparoscopic hernia repair continues to deploy tacks when the shaft is flexed over 3 cm. Covidien ABSTACK30 Absorbatack Fixation Device Features Designed with patient comfort in mind No metal required for fixation Supports a minimally invasive approach through 5 mm shaft and easy-to-use design Fixation strength Provides strong temporary mesh fixation, with retention strength comparable to the â??gold standardâ?? ProTackâ?¢ fixation device at 1 week and 2 months in an animal model1 Peace of mind Reduces the likelihood of inadvertent needle sticks in the OR, since no sharp piloting needles are required for deployment Potentially fewer visceral attachments than permanent tack fixation1 Violet tack with black-dot visualization feature to optimize visibility In Perfect sealed condition but past expiration date. Not for human use in the US. Expiration dates have mostly to do with sterilization and not the integrity of the product. The manufacturers sterilize the products after they are packaged and it lasts so many years. The only products we caution customers about are ones that are absorbable or drug coated.

Verathon is a medical device company that produces various products, including devices used in airway management and visualization. Here are some general considerations based on the components mentioned: Gliderite Rigid Stylet: A stylet is a rigid or flexible rod-like device that is often used to assist in the placement of various medical instruments, such as endotracheal tubes or other airway devices. Verathon: Verathon's products are often related to airway management and medical imaging, so the Gliderite Rigid Stylet might be used in procedures involving airway management. Applications: Rigid stylets are commonly used in the field of anesthesiology and emergency medicine to aid in the insertion of airway devices, ensuring proper placement and reducing the risk of complications.

An endobronchial tube is a medical device designed for use in the respiratory system, specifically within the bronchial tubes. These tubes are used in various medical procedures, such as bronchoscopy, endobronchial intubation, and lung surgery. The primary purpose of an endobronchial tube is to maintain an open airway and facilitate the delivery of oxygen or anesthesia to the patient's lungs during surgical or diagnostic procedures. Key features and uses of endobronchial tubes include: Bronchoscopy: Endobronchial tubes are often used in bronchoscopy procedures, allowing physicians to visually examine the bronchial tree and perform diagnostic or therapeutic interventions. Lung Surgery: During certain lung surgeries, endobronchial tubes may be employed to isolate and collapse one lung, providing a clear field of view for the surgeon. Ventilation: Endobronchial tubes can be used for selective lung ventilation. They can be positioned to direct ventilation to a specific lung, allowing the other lung to be collapsed or isolated. Anesthesia: In some cases, endobronchial tubes are used for delivering anesthesia during thoracic surgeries or procedures.

STERIS is a company that provides a variety of products and services in the healthcare and life sciences industry, including infection prevention, surgical, and sterile processing solutions. The term "POLYP TRAP" suggests a device that may be used in medical procedures, possibly related to endoscopy or another type of surgical intervention. Polyp traps are sometimes used in endoscopy procedures to collect tissue samples or removed polyps for examination. Here are some general considerations: Endoscopy Equipment: Polyp traps are often associated with endoscopy procedures where physicians examine the interior of organs or cavities using a flexible tube with a light and camera. Sample Collection: The trap may be designed to collect tissue samples, polyps, or other specimens during endoscopic procedures. STERIS: As a company known for infection prevention and healthcare solutions, their products may include devices for various medical applications.

Cordis is a well-known medical device company that produces a variety of products, including devices used in interventional cardiology and vascular procedures. The Cordis Saber PTA balloon is likely designed for use in percutaneous transluminal angioplasty procedures. Angioplasty is a medical procedure used to open narrowed or blocked blood vessels, typically arteries, to improve blood flow. During angioplasty, a balloon catheter is inflated at the site of the blockage to widen the vessel and restore blood flow. Here are some general features you might expect from a PTA balloon like Cordis Saber: Balloon Material: The balloon is typically made of materials like polyethylene or polyurethane. Inflation System: It would likely have an inflation system that allows controlled inflation and deflation of the balloon during the procedure. Catheter Design: The balloon is mounted on a catheter, which is a flexible tube that allows the device to be threaded through blood vessels to the site of the blockage. Guidewire Compatibility: PTA balloons are often designed to be used with guide wires for precise placement.

AS PS ABS PLA HDPE Granules Acrylonitrile - styrene copolymer. Acrylonitrile - styrene copolymer. A polymer composed of acrylonitrile and styrene.Typically 15-50% styrene.Transparent solid with yellow to amber needle color.The density of 1.06.It's thermoplastic.Not easy to change color.It is unaffected by diluteacids,bases, alcohols and gasoline.But soluble in acetone, ethyl acetate, dichloroethylene and so on.Can be used as engineering plastics.Excellent heat resistance and solvent resistance. Application. 1. General grade: cassettes, trash cans, toothbrush handles, lamp covers, pen tube, Cup with cover, cosmetic cases. 2. Special grade: blade of fan, batteries housing, lighters. 3. Refrigerator Sleeves, Miscellaneous 4.Used for pots, cups, milk bottles, etc., with high transparency, safety and resistance to falling 5. High Transparency, Heat Resistance, chemical resistance PC + Glass Fiber reinforced (GF) The glass fiber (GF) reinforced PC have improved tensile / flexural properties as well as thermal resistance. The FR rating improves with increase in thickness and the material can acquire a UL94 V0 rating at 3 mm. Grade: (ML3410-30 / MH3515-30 / MN-3110-30) 1) ML series: ML3405 / ML3410 / ML3420 / ML3430 (10-30% GF) General GF reinforced PC for standard application, they are characterise by balance of stiffness, modulus and impact. Application: Watch parts, switches and nobs, OA equipment. 2) MH series: MH-3515 / MH-3520 / MH-3530 (10-30% GF) Special GF reinforcements for optimal balance between modulus and improved weld line performance. MH series also improve warpage and dimensional stabilities. Applications: Watch parts, laptop housings, optical devices, mobile accessories, TV frames. 3) MN series: MN-3110 / MH-3120 / MN-3130 (10-30% GF) MN series are specially formulated for various kinds of housings and cases. They are characterise by superior impact performance, surface aesthetics and weld line strengths. Applications: Meter cases, electrical and electronic housings.