SF3 is a waterproof metal case standalone fingerprint access control with integrated EM reader. It supports transfer users by APP. Main Feature: > Waterproof, up to IP66 > Metal Design & Anti-Vandal > Standalone, one relay > 1,000 fingerprint, 2,000 card users > Wiegand 26~44 output > Pulse mode, toggle mode > Multi fingerprints/cards access > Interlock, Support Principal User > Support upload/ download users by APP
> Metal case,anti-vandal > One Programming relay output > Multi-color LED Status Display > 1000 Users(100 Fingerprint Users + 890 Card Users + 10 Visitor User) > Card type: 125KHz EM card > Mini Size: Diameter 73 mm, Thickness 20 mm > Capacitive Fingerprint Sensor
Ouzim BioEngine2 Biometric Fingerprint Access Control for security entrance solution Model: BioEngine2 Supports multiple authentication multifunction: fingerprint, passcode and cards. 1. 3,000 fingerprints +3,000 cards +3,000 passcode + 200,000 records 2. Support Mifare card 13.56 MHz +ID card 125KHZ 3. 360-degree rotation identification, high sensitive to identify. No need film cover on the sensor 4.
The S2-EM is a compact, waterproof stand-alone programmable access control system. The product unique feature is simple in design, easy operation, and high reliability. Main Feature > Waterproof, conforms to IP66 > One relay, 2000 users, standalone > Card type: 125KHz EM card only > Working temperature: -40 oC ~ 60 oC (-40 oF ~ 140 oF) > Pulse mode, toggle mode > Built in LDR for anti tamper > Card block enrolment > Easy for programming by master cards and remote control > Easy for install, 6 wires only
> Waterproof, up to IP66 > Metal Design & Anti-Vandal > Standalone, one relay > 1,000 fingerprint, 2,000 card users > Wiegand 26~44 output > Pulse mode, toggle mode > Multi fingerprints/cards access > Interlock, Support Principal User
Metal mini usb flash drive with custom logo for promotional gifts Sales: * Good Die USB flash drive 100% real capacity,Alcor/SMI/AS control chips super stability. * Free sample,free LOGO,free for loading data. * Test H5 one by one before shipping,factory direct sales good price. * Good pre-sales and after-sales service,long-term quality warranty 1 years. * Fast delivery 3-5 days for urgent order.
Model Number: Portable Air Conditioner ((WT-F26 gray) Power Type: DC Use: Room Condition: New After-sales Service Provided: None Warranty:1 year Type: PORTABLE Certification:CB, ce Cooling/Heating:Cooling Only Application:Car, Commercial, Garage, Hotel, Household, Outdoor, RV Power Source:Electric, usb Remote Control: Yes App-Controlled: Yes
Overview: This standalone access control card reader is specially designed for controlling the entrance of office, building, residential area, factory. Compared to other same products this one has the following advantages: Advantage: 1. Less than 0.2-second Response Speed 2. Built-in Antenna, LED (Double Color LED) and Loud Speaker (Buzzer) 3. Real Time Data Transfer 4. With Water-Proof Function 5. Production implementation in line with UL294 international standards 6. Used for office, factory staff quarters, public building and home. 7. Stable performance, resistance to metal shielding and interference ability, 8. Waterproof and rain-proof, Anti-freezing and heat protection.
Overview: This standalone access control card reader is specially designed for controlling the entrance of the office, building, residential area, factory. Compared to other same products this one has the following advantages: Advantage: 1. Less than 0.2-second Response Speed 2. Built-in Antenna, LED (Double Color LED) and Loud Speaker (Buzzer) 3. Real Time Data Transfer 4. With Water-Proof Function 5. Production implementation in line with UL294 international standards 6. Used for office, factory staff quarters, public building and home. 7. Stable performance, resistance to metal shielding and interference ability, 8. Waterproof and rain-proof, Anti-freezing and heat protection.
The product has Wiegand 26/ 34 output when the product is used as a 2d code reader, which can make the traditional access control, lift control, yard products,own the 2d code access function immediately without changing the main controller. And can access legally when it must comply with the rules of the 2d code so that the traditional access control, lift control and yard products have a real CPU system security level at once and reduce system costs greatly. Product Features: *Single-door access control + 2d code scanner engine + the second generation IC card reader *Wiegand 26/ 34 output *2-channel relay output *Voice amplifier and speakers *Off Line to Open Door *Network IP parameters, lock delay, Wiegand 26/34 *Data memory and the ferroelectric memory *Multi Card Reader *RJ45 10 / 100M TCP / IP transmission,WIFI transmission or mobile phone Bluetooth transmission,Supports TCP/IP remote IAP upgrade. *Built-in dual hardware anti-crash watchdog *Docking DEMO Language: JAVA, C#, C++, etc
Turkey Starter Feed (T-030424) (Feed from 12-18 Weeks) Vitamin-enriched Turkey Grower Feed is accessible in granule form. Brown in color, this feed provides 4.0% fat, 3.4% fiber and 19.4% protein in their crude form. This fodder contains up to 5.5% insoluble ash. This feed has been produced from ingredients like trace minerals, essential amino acids, soy meal, minerals, wheat based and corn based gluten, toxin binder, DDGS, grains, pulses and mold inhibitors. Offered Turkey Grower Feed has pure vegetarian content and it is accessible in pellet or coarse mash form. Product Details : Crude protein (N x 6.25)� (maximum %) :� 19.4 Crude Fat� (maximum %) :� 4.0 Crude fibre� (maximum %) :� 3.4 Moisture� (maximum %) :� 12 Acid-insoluble ash� (maximum %) :� 5.5 GENERAL DETAILS Ingredients :� Corn Gluten Meal, Wheat Gluten, Soy Meal, DDGS, Grains, Pluses, Essential Amino Acids, Vitamins, Minerals, Trace Minerals, Toxin Binders and Mold Inhibitor Ingredient Profile :� 100% Vegetarian Moisture (% Maximum) : 12 Product Form :� Coarse Mash Form / Pellet Form Product Branding : HAF Net Weight :� 39 Kgs When Packed Product Pricing :� On Unit Basis (for each 39 Kgs Packing) Production Capacity per Day :� 450 MT/Day Factory Visit :� Not Permissible Fumigation :� Aluminum Phosphide or Methyl Bromide (or any as per buyer specification) Clinical Test Methodology :As per IS:2052 Proximate Analysis on Dry Matter Basis We are prominent manufacturers and suppliers of a qualitative range of Turkey Grower Feeds. Our products are widely demanded by clients owing to its high nutritional value and safe consumption. Manufactured under the firm direction of quality controllers these products ensure longer shelf life and effective usage. one can avail these products in various sized packaging. We offer our products at market leading rates.
Product Details: Minimum Order Quantity 200 Piece Material Paper Type Passive RFID Packaging Type Roll Color Customized Design Customized Application Type Access Control We are offering RFID Windshield Tag to our clients.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
USB3.0 A+USB TYPE C Card Reader , SD/TF Card Read, 5Gbps 1.Port USB 3.0 A+USB Type C 2. IC NS1081 3.Card SD+TF3.0. Support two cards to read data at the same time 4.Shell Aluminum+ABS 5.Support Card Type SDXC,SDHC,SD,MMC,RS-MMC,MicroSDXC,MicroSD,MicroSDHC Card 6.Support System Windows OSXP/Vista/7/8/10(X86/X64) Mac OS10.8~10.13 Chrome
Brand Name None Model Number ACR-101 access control reader IC card reader ic card reader 13.56MHZ card reader door access control solution RFID card reader unlock door via card work with Access control board push button power supply electromagnetic lock CE yes waterproof IP68 Output Format Wiegand 26/34 RS485/232 warranty 2 years communication distance WG=100M RS485=1200M proximity card reader 13.56MHZ card reader without keypad
The NV10 USB+ is a compact, stackerless banknote validator suitable for most applications. Accepting over 100 different world currencies the NV10 USB+ is a truly global product.
