The new generation of the aquarium filter bag is made of high-quality filter materials. When the liquid flows through the filter bag, the solid prticles and colloids are isolated and blocked by the filter bag on the inner surface and deep layer of the filter bag, so the filtering effect is better Conventional pore density can be divided into the following two types: 150 mesh = 0.015mm aperture (density) 200 mesh = 0.020 mm aperture (sparse) The diameter of the plastic ring of the 4-inch filter bag is 10.5cm, and the total length of the filter bag is 38cm (commonly used) The diameter of the plastic ring of the 7-inch filter bag is 18 cm, and the total length of the filter bag is 43 cm The filter bag is sealed by hot-melt method to avoid the possibility of dirt spilling from the seam gap, and there is no jumper broken. The surface of the filter bag is specially treated, and the fiber of the filter bag will not fall off after long-term use. It has high strength and can be reused for many times after cleaning. 1 Why choose Vablue Filter Bag? 1) the Acicular 100%pure fiber has the multi dimensional structure 2) Special glaze put an end to the surface of fiber to avoid secondarily pollution 3) Fully FDA compliant materials 4) Silicone Free Needled Felt 5) 11 sets of different moulds to replace nearly most kinds of the filter bagsâ?? collars (EATON/FSI/CUNO/GAF) 2 Product Technical Parameter and Detail Items Metric Unit PE PO NMO PTFE Weight per unit area g/m2 350 350 150 700 Thickness mm 2.5 3.0 0.3 1.1 Air Permeability l/dm2/min 300 300 -- 150 Tensile Strength N/5 cm MD 800 800 -- 700 CD 800 800 -- 700 Bursting Strength N/cm2 413 420 190 Heat Shrinkage % MD
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
GENERAL TECHNICAL SPECIFICATION SOYBEAN OIL Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 â?? 141 Saponification Value: mg HOH/g: 180 â?? 200 Unsaponifiable Matter: %
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Specifications: Dirt (retained on 45 micron aperture) % wt: 0.08 Max Ash % wt: 0.6 Max Volatile matter % wt: 0.8 Max Nitrogen % wt: 0.6 Max Initial wallace plasticity (P0): 30 Min PRI (P30/P0) x 100: 50 Min Packaging: 33.33kgs/pack; 36packs/pallet, 16pallets=19.2mts/20ft.
The new generation of aquarium filter bag is made of high-quality filter materiaals. When the liquid flows through the filter bag, the solid prticles and colloids are isolated and blocked by the filter bag on the inner surface and deep layer of the filter bag, so the filtering effect is better Conventional pore density can be divided into the following two types: 150 mesh = 0.015mm aperture (density) 200 mesh = 0.020 mm aperture (sparse) The diameter of the plastic ring of the 4-inch filter bag is 10.5cm, and the total length of the filter bag is 38cm (commonly used) The diameter of the plastic ring of the 7-inch filter bag is 18 cm, and the total length of the filter bag is 43 cm The filter bag is sealed by hot-melt method to avoid the possibility of dirt spilling from the seam gap, and there is no jumper broken. The surface of the filter bag is specially treated, and the fiber of the filter bag will not fall off after long-term use. It has high strength and can be reused for many times after cleaning.
ITO GLOBAL, SURAT, GUJARAT ( India ) We can supply high strength, quality tested and recyclable fresh PP VOVEN bags of size 29x43 inch , for filling grains (like wheat) up to 25-50-100 kgs with UV protection, BAGS Weight- as per customers requirements. as a replacement for costly Jute Bags, in packaging of 500 bags/bale with compressed packaging to save logistics costs. Size can be customized as per requirement. Also, available in transparent, milky white and colors. Bag Specification 1. Bag Size 29 x 43 inch ( 74 cm x 110 cm) 2. Bag weight 155 grams / PC (2% tolerance) 3. Mesh 11 x 11 4. UV rays protection 5. Flexible bag 6. Packaged in moisture proof and compressed bales of 500 Bag Pieces / bale 7. Estimated rates as mentioned. 8. Rates are for FOB, CIF, CFR Basis, Hazira, India. We can supply across any major port on CIF basis. 9. Samples are available.
ITO GLOBAL, SURAT, GUJARAT ( India ) We can supply high strength, quality tested and recyclable fresh PP bags of size 29x43 inch , for filling grains (like wheat) up to 25-50-100 kgs with UV protection, BAGS Weight- as per customers requirements. as a replacement for costly Jute Bags, in packaging of 500 bags/bale with compressed packaging to save logistics costs. Size can be customized as per requirement. Also, available in transparent, milky white and colors. Bag Specification 1. Bag Size 29 x 43 inch ( 74 cm x 110 cm) 2. Bag weight 155 grams / PC (2% tolerance) 3. Mesh 11 x 11 4. UV rays protection 5. Flexible bag 6. Packaged in moisture proof and compressed bales of 500 Bag Pieces / bale 7. Estimated rates as mentioned. 8. Rates are for FOB, CIF, CFR Basis, Hazira, India. We can supply across any major port on CIF basis. 9. Samples are available.
Las 4NF- Lactose Substitute Non- Fat Solid is an Enzymatically Modified, Clean Label, Vegan, Gluten-Free, Plant-based and Non-GMO starch used as a special additive for improving texture of Paneer. It is 100% naturally made which does not have any preservatives and Mono sodium Glutamate (MSG). APPLICATIONS 1. Milk is first heated (pasteurizing) to 85�°C and held for 12 minutes. 2. Add 2% to 20% of LAS 4NF based on the Protein Content of the Milk to the pasteurized milk and stir slowly to ensure full dissolving at 80C. 3. LAS 4NF itself contains coagulant. If necessary add coagulant as per the costumer requirement slowly to the milk by slow stirring, maintaining the temperature at 70�° C. 4. Keep Slow stirring for complete separation of solids and whey. (Indication: Whey will turn to light green color and small lumps of solids will settle down) 5. The whey water is filtered through a fine mesh of muslin cloth. The separated particles remain in muslin cloth and it is held in hoofer. 6. Apply pressure on the covered solid spread evenly on hoofer, with a flat lid in lay till water droplets stop. 7. Then the Paneer is pre-cooled in pure water at room temperature for 10 mins or till the external sides can be held in hand water for 10 mins , then dip in chilled water for 4 hours. DOSAGE Use 2 to 20% of LAS 4NF of total batch size, based on the protein content of the milk. For lower protein content in the milk higher LAS 4NF need to be used.
LDPE Agri Film Natural Color (Top Use Without UV Layer) For Sales MATERIAL : LDPE agri film natural color (top use without UV layer) CATEGORY : LDPE TYPE : agri film GRADE : natural color (top use without UV layer) SPECIFICATION : LDPE agri film use for green house,top use. No UV protection layer. Around 400 micron thickness. loss rate under 15%. 100-200mt monthly supply. ORIGIN : Spain LOADING WEIGHT : 20 Tons CNF (USD/Ton) : 500-700$ Hai Phong/Cat Lai
LDPE black color recycle pellets Turkey Origin - 200mt per month Density 0.91 - 0.93 g/cm Melt Index (190°C/2.16 kg) 0.6 to 0.8 g/10 min Moisture Absorption (23°C, 50%Rh) 0.01 - 0.03 % Form 3 mm granules Filter Size 80 Mesh Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag
Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper Size: International standard A4: 210 x 297mm A3: 420x 297mm 8.5 x 11-inch (216 x 279mm) 8.5 x 14-inch (216 x 330mm) Key Performance: No jam in photocopy machine No double feed Stay flat after copying Leave no dust in the copy-machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Been developed for : Photocopy Macchines, Laser Printers, Ink-jet Printers, Fax Machines
Key performance: 1. No jam in photocopy machine 2. No double feed 3. Stay flat after copying 4. Leave no dust in the copy-machine 5. Nice appearance-white and clean 6. Nice touch-smooth and bulky 7. No see through-print both sides 8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper
Key performance: 1. No jam in photocopy machine 2. No double feed 3. Stay flat after copying 4. Leave no dust in the copy-machine 5. Nice appearance-white and clean 6. Nice touch-smooth and bulky 7. No see through-print both sides 8. Used for: Photocopy Machines, Laser Printers, Ink-jet Printers, Fax Machines Gramage: 80gsm, 75gsm, 70gsm Quality: Imported 100% Natural Wood Pulp Brightness = 102-104%,Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 or 152-165 Cobb Test: 27-33 g/m2 27-33 Two-sided usage gives the paper sheet high opacity. Smooth paper surface makes sharp printing and copying. Moist protected wrapper
FFP2, option with activated carbon Features 0.1um micron for (PFE) 95% (BFE) 99% Folded design is convenient to wear, with foam nose cover for excellent fitness. Uses low-allergenic filter layer without latex. Size: For adults Type: With filter/ without filter Material: Non-woven Total layers: Five layers Color: White
Quartz a crystal form of silica is found in a massive forming hill. Quartz is a mineral that's easily available from the crust of earth. And yet, it's quite valuable for its vast usage. Applications: - GLASS CERAMIC ABRASIVE PAINT SODIUM SILICATE FERRO SILICON REFRACTORY Millimeters Scale ASTM Scale 0.08-0.15mm 100-200 Mesh 0.1-0.2mm 70-120 Mesh 0.2-0.4mm 40-70 Mesh 0.3-0.6mm 26-40 Mesh 0.6-0.12mm 16-26 Mesh 1.2-2.5mm 8-16 Mesh 2.5-4.0mm 6-8 Mesh 4.0-6.0mm 4-6 Mesh 6.0-8.0mm 3-5 Mesh 38 Microns 400 & 200 Mesh Index Compound Unit Result 1. Silica - (SiO2) % 98.11 2. Alumina - (AI2O3) % 00.49 3. Iron - (Fe2O3) % 00.03 4. Titanium - (TiO2) % 00.03 5. Calcium - (Cao) % 00.64 6. Magnesium - (MgO) % 00.07 7. Soda - (Na2O) % 00.09 8. Potash - (K2O) % 00.03 9. Loss on Ignition - (LOI) % 00.20
0.1um micron for (PFE) 95%(BFE) 99% The 3D design structure provides better wearing, and with foam nose cover for excellent fitness. Uses a low-allergenic filter layer without latex. 1.Size: for adult 2.Material: Non-woven, melt-blown, P.P. spun bond. 3.Total layers: 5 layers 4.Color: White
Code 93100-Sï¼? For ages 6-12 Features Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 3-ply, non-woven material, 99% BFE at 3 micron. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For kids 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 93100: 3-ply, non-woven material 99% BFE at 3 micron Features: Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: For adults 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
Code 91100: 4-ties Features Suitable for OR, ER, patient care area, oral, dental procedure, clinics, isolation, IC practices, patients and other applications. 3-ply, non-woven material, 99% BFE at 3 micron. 1. Type: Flat shape, 3-ply, non-sterile 2. Size: L 3. Color: Green, blue, pink, white 4. Outer Layer: Water-repellent non-woven 5. Middle Layer: High level static filtration non-woven 6. Inner Layer: Microfilter Thermal-bond non-woven 7. Nose band: PE iron wire
