Adhesive mesh joint tape with corrosion resistance
Itis made formwoven fiberglass mesh and is treated with adhesive glue.That is thin, lightweight, extremely strong and very easy to apply. The tape greatly increases joint strength and durability to reduce cracking.
Adhesive mesh joint tape with corrosion resistance
Itis made formwoven fiberglass mesh and is treated with adhesive glue.That is thin, lightweight, extremely strong and very easy to apply. The tape greatly increases joint strength and durability to reduce cracking.
Our range of Fiberglass Tape is made of E-Glass yarn.
1) Good thermal resistance
2) Excellent insulating
3) Good corrosion resistance
Applications:
Fiberglass Tape can be widely used as wrapping and banding material for transformers, electric motors and cables.
Specifications:
Thickness(mm)
Width(mm)
Length per Roll(M)
0.1mm, 0.13mm, 0.15mm, 0.20mm etc
10mm, 15mm, 20mm,25mm,30mm etc
50M/100M Etc.
It could be packed with cartons. 50M per rool, 100m per roll.
It can be die-cut into various specifications. Common types include striped fiber tape and mesh fiber tape. It is suitable for transformers, high-temperature equipment, electrical appliances, coil wrapping and motors and other high-temperature special environment applications. It can also be used for heavy-duty packaging tapes with strong pulling force. , anti-friction, high temperature resistance, solvent resistance, insulation, good flame resistance and other properties.
Thickness:0.20mm, 0.30mmWidth:10mm, 15mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mmApplication:It is often used for insulation protection of coils, windings and other parts of electrical equipment to prevent current leakage or short circuit.
Fiberglass Tape Description:
1. It is fabricated from high quality texturized C glass or E glass fiber yarns that will not burn and will withstand continuous exposure to temperatures of 1000F / 520C.
2. It resists most acids and alkalis and is unaffected by most bleaches and solvents.
3. It is an excellent substitute for asbe stos tape.
4. Texturized fiberglass tape with copper wire, nickel wire or stainless wire are also available.
Fiberglass Tape Application:
1. All types of thermal insulation and heat protection provide protection of industrial wires, cables, hoses, tube and pipe and also provide thermal insulation and personnel protection. Also used as a gasket or seal.
Fiberglass adhesive mesh is made from c-glass or e-glass woven fabric then coated by acrylic acid copolymer liquid and adhesive glue.It is widely used for exterior insulation finishing systems(eifs), waterproof roofing and stone reinforcement.
It has following advantages:
1. Water resistance, flexibility, softness.
2. Resistance to aging and attack from breakdown.
3. Resist cracking, does not rot or bubbles, and also alkali resistance.
z
Vermiculite Fiberglass Tape Description:
1. Vermiculite Fiberglass Tape is fabricated from high quality texturized C glass or Eglass fiber yarns that will not burn and will withstand continuous exposure to temperatures of 1022F/550C.
2. Vermiculite Fiberglass Tape resists most acids and alkalis and is unaffected by most bleaches and solvents.
3. Vermiculite Fiberglass Tape is an excellent substitute for asbe stos tape.
4. Texturized fiberglass tape with copper wire, nickel wire or stainless wire are also available.
Vermiculite Fiberglass Tape Applications:
1. All types of thermal insulation and heat protection provide of industrial wires, cables, hoses, tube and pipe and also provide thermal insulation and personnel protection.
2. Used as a gasket or seal.
All VEIK PTFE tapes are manufactured by coating one side of our high quality teflon fabric with pressure sensitive silicone adhesive.These products are designed to withstand operational environments of up to 260 deg C(500F), and they can be used in direct contact with food. Our tapes come supplied with a convenient yellow release liner fro wasy installation.
Features :
All dimensions can be customized.
1. Non stick PTFE materials prevent the build up of molten film and plastic on its surface.
2. The temperature resistant PTFE coating allows high and low operating temperatures.
3. A yellow corrugated release liner is used on our PTFE tapes providing fast and easy removal.
4. Manufactured in varying thicknesses to cover a wide range of applications our PTFE tapes are of the highest quality available in today's market.
The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Mesh size:2.5x2.5mm 3x3mm 4x4mm 5x5mm weight:30-300g length:50m-100m width:20cm-200cm color:white, orange, blue, etc.. Packing 1. Shrink only. 2. Shrink and woven bags. 3. By shrink film first each roll, then put into carton delivery:within 15 days after
Hot selling Polyester fiberglass tape 0.15*25 for Vietnam power system
The company has a large flow, high discharge pressure, good performance, high efficiency, long life, high reliability, special for the technical valve products. Our company's main products: hydraulic machinery and components, hydroelectric generating units; coal-fired generating units; generating units; electrical and electronic products processing; mechanical parts processing. Mainly engaged in the power industry host (steam turbine, water machine, boiler, turbine) accessories, spare parts, spare parts, auxiliary equipment and environmental protection equipment.
Yoyik can offer many spare parts for power plants as below:
l joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;when arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable
Fiberglass duct rodder features&benefits:
1. Strong non-conductive fiberglass rod construction
2. Stainless steel drawing head
3. For longer conduit runs and underground duct
4. Rugged tubular steel reel with adjustable position.
5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling
7. Anticorrosion , good elasticity , long working life.
Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools
Fiberglass adhesive mesh is made from c-glass or e-glass woven fabric then coated by acrylic acid copolymer liquid and adhesive glue.It is widely used for exterior insulation finishing systems(eifs), waterproof roofing and stone reinforcement.
It has following advantages:
1. Water resistance, flexibility, softness.
2. Resistance to aging and attack from breakdown.
3. Resist cracking, does not rot or bubbles, and also alkali resistance.
z
High Temperature PTFE Teflon Fiberglass Coth Tape,PTFE (Teflon)Coated Fiberglass Tapes with silicone adhesive backing is made from a very tightly woven fiberglass cloth that has been heavily coated with PTFE/(polytetrafluoroethylene) and has a high-temperature, pressure-sensitive silicone adhesive applied to one side. It has a lower bonding strength than the same type which is acrylic adhesive, but a higher temperature range. It has two types: one has lining, the other hasn`t.
Features:
The using temperature is between -60ºC -260ºC, weather-resistant & anti-aging.
Non-Adhesive: The surface is smooth, not easy for adhesion. Easy to clean the surface oil, stain, or other
attachments.
Resistant to strong acid, alkali and various kinds of organic solvent and chemical etching.
Non-toxic, drug resistance. Almost resistant to all pharmaceutical items.
Good insulation, prevent ultraviolet, anti-static.
Fire retardant.
Resistant to tearing, puncturing and abrasion.
Easy to use, long service life.
Applications:
All kinds of high temperature of roller coated, heating plate, off- membrane, thick liquid yarn machine' off-membrane drum, thermoplastic demoulding and other off-membrane industries.
Food, dairy products, pharmaceuticals of plastic film bags hot sealing pressure sticky.
The sliding channel, hopper, aviation mould etc liner paste.
Suitable for other places which need anti-metal and keeping a smooth part
E: Corrosion resistance and high temperature resistant surface treatment
As insulating liner, insulation parts of the insulation encapsulation etc.
Used for various fine pressure roller coated machine, the surface of laminating content
These product properties are suggestive and all products can be customized or converted to fit specific application requirements. Please contact us to discuss your unique application needs.
Self Adhesive Fiberglass Mesh Tape
Descriptions:
Fiberglass Mesh Tape, also call Bi-directional filament tape, a kind of bi-direction reinforced filament tape backed with fiberglass on the base material of PET. Hot melt sealing tape. Good abrasion resistance and high strength. Suitable for heavy goods bundling and package reinforcing.
Features:
Abrasion and moisture resistant.
High tensile strength.
Allows printing and illustrations to be seen through the tape.
Good shear and initial adhesion.
Protection of filaments and adhesive to provide longer package life.
Good holding under wide range of application conditions with minimum amount of tape.
Less tape needed at lower cost for applications where high tensile streng this a main requirement.
Applications:
Mainly used for packaging heavy, strong bonding, electrical components fixed.
Used in repairing the crack and joints or holes of drywall, plasterboard, stucco; and repairing other damages in other wall surface.
24564 Fiberglass Tape Suppliers
Short on time? Let Fiberglass Tape sellers contact you.
