Fiber Optic Breakout Cable Suppliers and Manufacturers

Breakout optical cable, suitable for outdoor use, is used for RRU assembly in 3G and LTE (4G) base stations. Fiber optic is a system that works on the principle of transmitting light through a pure glass thread as thick as a human hair and produced very precisely. The main reason for choosing cables produced in this way is that environmental conditions are severe; It is not affected by humid, damp places where electrical field interference is intense and always provides a stable connection. Fiber optic cables transmit at the speed of light, that is, 300 thousand km per second. Because of these aspects, they are designed for data transfer over long distances. LC LC MM 50/125 DX type breakout fiber optic cable is mostly used in base stations. Fiber optic breakout cables are prepared in different quantities according to the needs in the field.

Feature: Excellent corrosion resistant, waterproof, flame retardant properties; compact structure, small size; Flexible, small bending radius, and excellent stress and strain properties. Application: Excellent corrosion resistant, waterproof, flame retardant properties; compact structure, small size; Flexible, small bending radius, and excellent stress and strain properties.

Feature: Excellent corrosion resistant, waterproof, flame retardant properties; More cable cores, compact structure, small size; Flexible, small bending radius, and excellent stress and strain properties. Application: Used in indoor cabling, as fan-out cable; Used in pigtails and patch cord; Can be used as lead cable into buildings

Feature: Excellent corrosion resistant, waterproof, flame retardant properties; Compact structure, small size; Flexible, small bending radius, and excellent stress and strain properties. Application: Excellent corrosion resistant, waterproof, flame retardant properties; Compact structure, small size; Flexible, small bending radius, and excellent stress and strain properties.

Fiber optic patchcord cables are used in GSM base stations, Fiber Optic interconnections, patch panels, distribution point connections and ODF connections with its structure suitable for indoor use. The following types of fiber optic cable patchcord cables are mostly used in base stations. LC LC MM 50/125 DX patchcord fiber optic cable LC LC SM 9/125 DX patchcord fiber optic cable SC LC MM 50/125 DX patchcord fiber optic cable SC LC SM 9/125 DX patchcord fiber optic cable Fiber optic breakout cables are prepared in different quantities according to the needs in the field.

Please quote for the following wholesale product requirement - Product Name: Optical Fiber Cables Specifications: Type: Optical Fiber (POF), Transparent Glass Or Plastic Fibers Voltage: Low & Medium Material: Plastic Fiber, Rubber Use: Industrial, Construction Size: Customized Packaging Terms : Standard

our company has engaged in fiber communication products for 15 years, our main products are optical cable and FTTx system products,including Outdoor Fiber Optical Cable,Indoor Fiber Optical Cable,Data Cable,Municipal Telephone Cable,etc. For the individual or enterprise who has the requirement for setting up the optical cable factory or communication product assembly factory, we will provide service of factory planing and designing, production line installation and commissioning, product design and testing , production process control and technic support. We supply all the raw materials too. KINGFIBER is devoted to build a win-win relationship with our partner. If you have any requirements in fiber communication products, please contact me at any time,and I will provide you more details with catalogue.Thank you. Best regards, Andy Ma Vice General Manager Henan Kingfiber Industry Co.,Ltd

Optical Fiber Cable : We carry brand names such as Asahi/Lucina and Showa Electric Wire Cable

Gyfta53 fiber optic cable characteristics: fiber optical cable 1.Accurate fiber excess length ensures good mechanical and temperature performance Gyfta53 fiber optic cable brief introduction The fibers, either of single-mode or multi-mode type, are placed in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A piece of fiber reinforced plastic (frp) locates in the center of core as a non-metallic strength member. The tubes(and fillers) are stranded around the strength member into a compact and circular cable core. An aluminum polyethylene laminate (apl) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin pe inner sheath. After the psp is longitudinally applied over the inner sheath, the cable is completed with a pe outer sheath. Gyfta53 fiber optic cable pictures: 1.Gyfta53-fiber-optic-cable Gyfta53 fiber optic cable fiber optical cable Gyfta53 fiber optic cable paramters: fiber optical cable Gyfta53 fiber optic cable Wooden drum // special package can be customized.Inspection certificate of fumigation should be notified before production as it will take 7 days from application to approval.

Optic fiber cable for duct, direct burial, aerial application 3km per wooden drum optic fiber cable or by customers' require

1.Gyts fiber optic cable. 2.Application:aerial, duct. 3.Long-distance communication, lan etc. 4.Armored steel tape. 1/2/3 km per a wooden drum

Cable type G.652d/g657a, pvc, lszh, simplex or duplex, 0.9, 2.0, 3.0mm Fiber type Smf-28e, sm 9/125um, mm 50&62.5/125um Polish method Upc, pc, spc, apc Connector Fc, sc, lc, st, e2000, din, d4, sma, fddi, mpo/mtp Insertion loss 0.1db (for single mode master) 0.25db (for single mode standard) 0.25db (for multimode) Return loss (for single mode) Upc 50db Spc 55db Apc 60db (typ.65db) Repeatability ¡¨¤0.1db Operating temperature -40 c to 85 ¡ãc Geometry requirement (for single mode) Ferrule end face radius7mm r 12mm (for apc) 10mm r 25mm (for standard) Apex offset 30 |¨¬m (for master) Apex offset 50 |¨¬m (for standard) Undercut -50nm u 50nm 1pc/plastic bag, 1500pcs/carton box

Fiber patch cord Fiber optic accessories.

Bulk fiber cables Panels and connectivity Assemblies and patch cables.

Control :by technician Needed air :10.5 bar 12 m³/min.(duct 40 hdp) Air engine : double effective, 740 watt (2 pieces) Needed air for engines : 6 bar-1.6m³/min. Cable installing velocity : 0, 30, 50m/min. Lay down power :80~85 kg. Dimensions (width x lenght x height) : 365mm x 330mm x 540mm Weight of machine :46kg. In chrome box.

Optical fiber cables

1. "lucent" nca 8055-216 tw (outdoor accuribbon) in the quantity of 1, 700 km 2. "corning" nz-dsf 216 tw (outdoor 2 cor non-metalic) jelly with two (2) parallel steel in the quantity of 200 km. Drum : 192 Volume: 20/22 container 40/ft