General Features
Size Universal
Colour White
Packaging 20 masks per box
Safety Features
CEcertified FDAcleared
In accordance with the European standard EN 1492001A12009
Filtration efficacy of PM25 99
Filtration efficacy of PM03 94
Disposable
Inward leakage lt8
Comfort Features
The soft material makes the maskwearing more comfortable
Adjustable nose clip for a better fit
Two elastic headbands for a more secure maskadjustment
High fit effectiveness
Less moisture and heat buildup valved respirators
More lightweight and easier to carry nonvalved respirators
Filtration efficacy
Our filtering face piece respirators can be used for respiratory protection against various nonoily airborne contaminants They are extremely effective 9499 against tiny particulate matter of less than 03 and 25 microns in diameter PM03 and PM25 respectively among which are many infectious agents For the purpose of protecting yourself from influenza viruses SARS avian flu coronavirus etc respirator masks were recommended as part of the PPE by the World Health Organization WHO
100 compliant with regulations CE FDA EN 1492001A12009
Our FFP2 respirators have been confirmed to meet all of the performance requirements set by the European Standard EN 1492001A12009 They are also completely CEcertified and FDAcleared Please note that if you need reassurance regarding the certification of our products we are willing to send you the copies of the relevant documents upon request
Nonreusable NR
In order for your FFP2 particulate respirator to effectively protect you from the particulate matter you should wear it for a maximum of four to five hours Please do not share your mask with other people If your respirator mask becomes damaged or dirty throw it away Please follow our instructions for proper user seal checks before each use
Folded Design
You can easily carry around our folded masks in your pocket or your purse Convenient as they are they might be the right choice to have on you at all times Just store them in a clean plastic bag and youre good to go But be careful to put them on tightly and not leave any gaps between your face and the mask If youre looking for a design that is less likely to have leakage check out our cupped design masks
Valved
The purpose of the valve on respiratory protective masks is to lessen the breathing resistance which is higher compared to other nonrespirator masks for safety reasons The wearing of your respiratory protective mask becomes more comfortable as there is less moisture buildup However if you suspect you have been infected wearing an unvalved respirator is advised Otherwise you risk exposing other people to virus particles
nbsp
Before entering a possibly contaminated area you need to properly put on your filtering facepiece To do this you need to
Take the mask in one hand so that the nose clip is turned upwards
Place the bottom of the mask against your chin while using your other hand to pull both straps over your head The botto
We offer all types of FFP2 face masks.
Our FFP2 filtering half masks are manufactured in accordance with regulation (EU) 2016/425 of the European Parliament and of the council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC and EN 149:2001+A1:2009 Respiratory protective devices
Filtering half masks to protect against particlesâ??Requirements, testing, marking.
The masks are non-reusable particle filtering half masks and intended exclusively for personal protection. FFP2 cup type filtering half masks are designed and produced to protect against both solid and liquid aerosols, which can be only used in the general working environment. The mask cannot be used under the following environment(s):
- Do not use inflammable or explosive environment;
- Do not use for respiratory protection against atmospheric contaminants/concentrations which are unknown or immediately dangerous to life and health.
1. Five layers of protection. 2. With breathing valve.
3. The first layer: 50 grams of non-woven fabric, the second layer: 25 grams of hot air cotton; the third layer: 25 grams of 99% melt-blown fabric; the fourth layer: 25 grams of 99% melt-blown fabric; The fifth layer: 25 grams of non-woven fabric.
4. Optional internal and external nose bridge.
5. Complete export qualifications, with CE, FDA, ISO certificates.
6. Ministry of Commerce White List.
Product name : FFP2 Respirator mask (No Valve)
Product specification : FFP2 Respirator mask Without Valve
Price on request
Origin : China
Certification : CE
Production capacity : 5 million per week
MOQ : 100,000 Pcs
Product name : FFP2 Respirator mask (With Valve)
Product specification : FFP2 Respirator mask With Valve
Price : Pricing on ask
Origin ; China
Certification : CE
Production capacity : 5 million per week
MOQ : 100,000
85141 Ffp2 Valve Masks Suppliers
Short on time? Let Ffp2 Valve Masks sellers contact you.
FFP2 Vertical-Flat Valved Respirator Face Mask
CE certified by CCQS Ireland (NB no. 2834)
Tested and certified according to EN 149:2001+A1:2009
Module Type of Certification: Module B + Module C2
Class: FFP2
This respirator mask is certified and classified as FFP2 under EU standard EN 149:2001+A1:2009.
EN 149:2001+A1:2009 - Respiratory protective devices - Filtering half masks to protect against particles.
This European Standard specifies the minimum requirements for filtering half masks used as respiratory protective devices, specifically against particles, and the required laboratory and practical performance tests to assess masks' compliance.
EN 149:2001+A1:2009 classified half masks into three types according to their filtering capacities: FFP1, FFP2 and FFP3. Respirators that meet the requirements of EN 149:2001+A1:2009 are designed to protect against solids, water-based aerosols, and oil-based aerosols.
FFP2 masks have a minimum of 94% filtration percentage and maximum 8% leakage to the inside. They are mainly used in construction, agriculture, and by healthcare professionals against influenza viruses.
-Disposable ffp2 mask with valved respirator that increases the airflow.
-Meets EU standards.
-Certificated with CE, FFP2, ISO 9001.
-High quality and comfortable.
-Dual straps.
-Adjustable aluminium nose piece.
-Nose foam inside.
-Latex free.
1. Five layers of protection.
2. Without breathing valve.
3. The first layer: 50 grams of non-woven fabric, the second layer: 25 grams of hot air cotton; the third layer: 25 grams of 99% melt-blown fabric; the fourth layer: 25 grams of 99% melt-blown fabric; The fifth layer: 25 grams of non-woven fabric.
4. Optional internal and external nose bridge.
5. Complete export qualifications, with CE, FDA, ISO certificates.
6. Ministry of Commerce White List.
9.[carton size: 67x30x48CM
20 pieces/ box
400 pieces/ carton
G.W.: 8.9 KGS]
///
10.[OEM orders & ODM orders are welcome.
CE certificate & test report.
White list in China Commercial Bureau.]
Cup-shape FFP2 without valve, $1.25/pc
Cup-shape FFP2 with valve, $1.85/pc
Delivery 300K in 3-5 days and 1 million in 9-15 days
Pay 30% in advance, 70% against shipment or
Letter of Credit with 5% extra cost charged.
The Rhysley Particulate Respirator N95 Face Mask is more than 99% Bacterial Filtration Efficiency (BFE) with multiple layers of protection against pollutants and toxins. The mask comes with a breathing valve which makes sure that it does not suffocate you. It also has an adjustable nose clip that offers maximum comfort.
It is designed to provide you with reliable respiratory protection. It is an ideal choice against dust, odour, pollen, and toxins. It has special filters that have an extended dust holding capacity, ensuring that the mask has a longer shelf life.
The adjustable nose clip helps the mask fit the face properly, eliminating the chance of leakage. The respirator provides additional protection from dust and liquid droplets in the air. The N95 mask is ideal for both men and women.
