Feedback Dc Electronic Load Anel Series Suppliers and Manufacturers

ANEL series feedback DC electronic load adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, energy feedback to the grid at full power, more energy-saving, green and environmentally friendly compared with conventional DC load; advanced digital control, ultra-high control accuracy, fast response, wide output voltage range, it can achieve full range of load input from 0V to full scale. The feedback DC electronic load realizes the DC load function of automatic energy feedback to the grid. Compared with the conventional load, it is more convenient and safe. The conventional load is energy-consuming, and energy is consumed by resistance heating; the feedback DC electronic load is energy-feeding, and the energy is fed back to the grid, green, environment friendly, reliable, safe, featuring outstanding advantages. Features: Two-stage circuit of PWM rectification and bidirectional DCDC, achieving load of automatic energy feedback to the grid, energy saving, green and environment protection. Mainstream high-frequency PWM rectification control, power factor 0.99, THD and injected harmonic current meet the requirements of GB/T14549-93, high-quality energy feedback to the grid. High-precision output: accuracy of voltage and current: �±0.1% F.S. Fast dynamic response: response time for 10%-90% sudden applied load and 90%-10% sudden shedding load: â?¤5ms Optimized bidirectional DCDC conversion, wider range of DC input voltage, 0V-full scale DC input. CC, CV, CP modes. Multi protection: input over-voltage/under-voltage, lack phase, output over voltage, IGBT overheat, IGBT over current, over temperature protection, short circuit current-limiting protection. Built-in EMI filter to filter the interference signal caused by the high-frequency switching process. Communication and remote control: standard CAN, RS232/RS485 port and remote control software of the upper computer. Efficiency up to 95% under rated conditions. Large-screen LCD display, compatible with buttons and touch screen, suitable for operation under various harsh operating conditions. Screen (key) lock: After the power supply is not operated for more than 5 minutes, the keyboard and input of touch screen will automatically be locked. Application: Fuel cell test Testing of charger and charging pile Battery pack, battery pack discharge test Capacitor, super capacitor discharge test Power electronics test Energy storage system converter test Replace conventional DC load

The AN23500(F)/AN23600(F) series DC electronic load is a new DC load launched by Ainuo Instruments, covering voltage of 150V, 600V and 1200V, and the power 150W~48kW. This series of electronic load is mainly used for testing of products in many fields such as new energy vehicle OBC, power battery, charging spot test, power electronics, servo/server power supply, high voltage UPS, photovoltaic, grid energy storage, aerospace and other fields. A new generation of digital controller is adopted, with built-in five modes and a variety of advanced modes, to meet the programming, automated testing and other needs. Features: Low power AN23500(F) series stand-alone input power: 600W, 1200W, voltage: 150V, 600V Medium power AN23600(F) series stand-alone input power: 2kW-48kW, voltage: 150V, 600V, 1200V Multi modes: CC, CV, CP, CR, CCD, LIST, AUTO ï¼?for AN235 seriesï¼?, OCP, OPP, LED (for AN235 series), Short, FLEX, BATY, etc. Excellent performance indicators: accuracy of loading and measuring: 0.05%+0.05%FS (for AN235 series), dynamic loading frequency of 50kHz (for AN236 series) CV loop adjustable, adapt to different power sources (for AN236 series) 500kHz high-speed voltage /current sampling (for AN236 series) Instant overpower load pull (for AN236 series) Current rise rate up to 12As (for AN236 series) Protection: OTP (over temperature protection), OVP (over voltage protection), OPP (over power protection), SCP (short circuit protection), RVP (reverse voltage protection), SSP (remote sampling line unconnected protection), OOP (Power supply, load invalid power-off protection), HWP (patent: hardware forced lock), SWP (patent: software forced lock) Rich ports: built-in common protocols such as SCPI, MODBUS, and PLC port, suitable for system integration Simple and practical: full-color LCD screen, clear and beautiful; operation menu, easy to learn and use.

KELB15 is a precision programmable DC electronic load controlled by a high performance microprocessor. It uses 3.5-inch TFT true color LCD display offers 4 basic working modes (CC/CV/CR/CW) and 10 functional modes. With comprehensive protection, over-heat protection, over-current protection, over-power protection, over-voltage protection, loop oscillation protection. KELB15 series E-load supports RS232, LAN, USB and analog interfaces to fit your versatile solution and testing needs

KELB60 is a precision programmable DC electronic load controlled by a high performance microprocessor. It uses 3.5-inch TFT true color LCD display offers 4 basic working modes (CC/CV/CR/CW) and 10 functional modes. With comprehensive protection, over-heat protection, over-current protection, over-power protection, over-voltage protection, loop oscillation protection. KELB60 series E-load supports RS232, LAN, USB and analog interfaces to fit your versatile solution and testing needs

KELB180 is a precision programmable DC electronic load controlled by a high performance microprocessor. It uses 3.5-inch TFT true color LCD display Offers 4-basic working modes (CC/CV/CR/CW) and 10 functional modes. With comprehensive protection, over-heat protection, over-current protection, over-power protection, over-voltage protection, loop oscillation protection.KELB180 series E-load supports RS232, LAN, USB and analog interfaces to fit your versatile solution and testing needs.

PA66 GF regrind black color Pa6 / pa66 is mainly applied as follows: 1. Improves nylon water absorption and improves size stability of the product. 2. Improved nylon fire resistance to meet the requirements of electronics, electrical, communications and other industries. 3. Improved mechanical strength of nylon to achieve the strength of metal materials, metal replacement. 4. Improves nylon low-temperature resistance and enhanced resistance to environmental stress. 5. Improves nylon wear resistance to meet high wear resistance requirements. 6. Improves nylon antistatic properties to meet its extraction requirements and mechanical applications. 7. Improves nylon heat resistance to adapt to high temperature conditions such as car engines. 8. Reduce nylon cost and improve product competitiveness. Through the above modification, high performance and functionalization of nylon composite materials are realized, thereby promoting the development of industries involving high performance and high quality. MATERIAL: PA66 GF regrind black color CATEGORY: PA66 GF TYPE: Regrind GRADE: Black color SPECIFICATION: GF50. 1 full container available Origin: Tunisia LOADING WEIGHT: 23 Ton FOB (USD/Ton): 850$ - 1050$ Packaging: Jumbo Bag Est. Shipping Time: 15, 30, 45 days

- Icumsa 45, 150, 600, 1200. - Packaging: 50kg. Dlc / Lc Transferable buyer Sends Loi + Id (passport) + Buyers Cis + Company Registered Of The Signatory Or Company Ceo/manager seller Sends Fco To The Buyer buyer Signs An Returns The Signed Fco With An Icpo + Bcl / Rwa seller Sends The Draft Sales And Purchase Agreement (spa) To Buyer wihtin 48 Hours: Buyer Signs Back The Spa, Inputs Authorized Signers Passport, Proof That The Signer Is Authorized To Sign This Contract, The Incorporation Certificate Of Company And Sends Its Own Company Cis/kyc And The Cis/kyc Of The Issuer Of The Financial Instrument If Buyer Is Using A Financier To Issue The Payment Guarantee And Buyer Sends Back Seller Signs The Spa And Sends Back Accompanied With The Proforma Invoice buyer Returns The Proforma Invoice Signed With A Rwa (ready Willing And Able) Issued By Buyers Bank On The Buyers Name To Sellers Bank after Having Been Signed And Stamped Manually By The Seller And Buyer, Seller Will Send Via The Docusign Service For The Management Of Electronic Signatures And Digital Transactions (https://www.docusign.com/) And Deemed As Having Original Value With All The Associated Legal And Legal Scope. It Will Therefore Be A Substitute For The Original Paper within 7 Business Days, Buyer Issues The Financial Instrument Draft Real Draft From The Bank With All Related Information Fullfill Including The Confirming Bank Detail- To Seller By Official Email seller Validates Draft With Fiduciary Firm And Indicates The Reviews If Needed Or Advises If The Financial Instrument Can Be Opened (no Financial Instrument Should Be Sent Directly To The Bank Without Prior Validation Of The Draft. Otherwise, It Will Be Refused And This Will Constitute A Breach Of Business) buyers Bank Issues A Pre-advice Swift Mt799 Stating They Are Ready To Issue The Mt700-lc To The Designated Bank To Receive It the Fiduciarys Bank Responds By Swift And Agrees To Receive The Swift Mt700-lc In Their Bank buyers Bank Sends The Swift (mt700) Message To The Fiduciarys Bank [within 10 Days Maximum After The Financial Instrument Is Opened, 2% Performance Bond Is Granted To Buyers Bank] within 35/40 Days Maximum After The Financial Instrument Is Opened, Delivery Starts wthin 3 Business Days After The Shipping Document Including Sgs Report Is Given To Buyer, Real Payment Is Released By Mt103/tt At Loading Port.

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, the inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy + 1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock.

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 11, European CE (EMC, LVD, UL1741) and ISO9001 certificates.

SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won't cause mechanical failures. This Inverter is very suitable for solar power systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, TV, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �?�±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.