This paint, based on acrylic dispersion, is used for covering external facades. It can be used for coating mineral substrates: concrete, cement plasters, and cement-lime plasters that have not been painted before. After polymerisation, it forms a highly weatherproof coating. It protects the painted substrates against water penetration, at the same time enabling moisture and carbon dioxide to penetrate. On the surface, it creates a matt coating of high decorative values and high resistance to abrasion. The paint is produced in white. Paints may be coloured according to the palette of colours, available upon request.
Acrylic facade paint for tinting on tinting equipment in saturated bright shades according to the Color Mix system according to the palette of MD COLOR, RAL, NCS, and others. Used only toned! It is intended for painting of facades, and also creation of wearproof coverings indoors. Forms a water-repellent, moisture-resistant, elastic and durable coating. Resistant to wet abrasion. It is used for painting of cement plaster, concrete, a brick, surfaces of systems of thermal insulation of facades, and also gypsum cardboard, DVP, a chipboard, QSB and OSB, plywood, a tree and wall-paper indoors. Compatible with pigments from most European manufacturers. Does not contain solvents. Vapor permeable.
100% ACRYLIC HIGH BULK RAW WHITE / GREIGE YARN FOR KNITTING ON HANKS. COUNT RANGE NM 20 TO NM 50. WE CAN SUPPLY BOTH SINGLE & TFO AND UNDYED / DYED BOTH.
Acrylic Wood Sealer
Acrylic Matt Topcoat Clear
Acrylic Gloss Clear Full Gloss
Acrylic White Full Gloss
ACRYLIC WHITE MATT
ACRYLIC BLACK GLOSS
ACRYLIC COLOURS APS/RAL
ACRYLIC SEALER
ACRYLIC MAT TOPCOAT CLEAR
ACRYLIC WHITE PRIMER
ACRYLIC MATT TOPCOAT WHITE
Synthetic technology motor oil specially designed for modern high performance engine with gasoline direct injection (GDI and Turbo-GDI) systems. Developed by latest evolution technology platform EVOTEC fortified with SMART Molecules that improve engine cleanliness and prevent low-sped pre-ignition (LSPI). Outstanding low friction and heat resistance enhance acceleration response, wear prevention and maintaining engine power for better drivability in all situations.
APPLICATION
Designed for high performance gasoline engine both GDI and Turbo-GDI.
Recommended for passenger car, sport car and SUV equipped with start-stop system.
Suitable for all port fuel injection (PFI) gasoline engines running with unleaded gasoline (ULG) and ethanol blended gasoline (E10, E20 and E85).
KEY FEATURES
Enhance excellent engine cleanliness especially in piston and help reduce LSPI occurrence in Turbo-GDI engine by SMART Molecules.
Improve superb engine protection against wear and prevent timing chain elongation for maintaining maximum engine performance.
Outstanding low oil friction with high heat resistance by EVOTEC technology for superior acceleration responsiveness and reduced oil consumption.
Better oil degradation resistance and engine sludge prevention through oil drain intervals.
Product Properties for AdBlue as per the revised ISO22241 standard.
Urea 32,5 % (approximate) solution dissolved within deionised water. As required by SCR equipped vehicles under the provisions of Emissions standards Euro IV (Euro4), Euro V (Euro5) & Euro VI (Euro6).
Urea Content 31.8 33.2 % by weight
Density at 20C 1.0870 1.0930 g/cm
Refracting Index at 20C 1.3814 1.3843
Alkalinity as NH3 0.2 %
Biuret 0.3 %
Aldehyde 5 mg/kg
Insolubles 20 mg/kg
Phosphate (PO4) 0.5 mg/kg
Calcium 0.5 mg/kg
Iron 0.5 mg/kg
Copper 0.2 mg/kg
Zinc 0.2 mg/kg
Chromium 0.2 mg/kg
Nickel 0.2 mg/kg
Aluminium 0.5 mg/kg
Magnesium 0.5 mg/kg
Sodium 0.5 mg/kg
Potassium 0.5 mg/kg
EXPORT QUALITY PRODUCT Ritver Kitchen Emulsion is a water-based paint, it appears in matt finish and are excellent paints for the ceiling and kitchen and bathrooms. Excellent coverage dependent on the quality of substrate (9 to 11 sqmtrs per liters) at 30 micron thickness Paint System: Apply Primer Apply Wall Putty Apply Diamond Emulsion (choose from our color list)
