GYJ series extrusion machine is the special equipment of making the P fixed- end anchorage. It is light and simple operation etc, and can squeeze BFM 15P and BFM13P extruding set. Model:GYJ 500 Rated extrusion pressure:495KN Extrusion hydraulic: 63Mpa Stroke:150mm Mass:70kg. Overall dimension:760x200x200.
On the basis of absorbing foreigh advanced technology.Plastic extruding flat film stretching line is used by micro-processor control frequency conversion and silicone controlled dc etc.The main parts use foreign quality products.The line on large l/d ratio and mixing smelt section on the extruder screw for which is specially parts using quality steel, for the filter changing system we apply advanced foreign automatic filter changing structure.The heating board is changed into advanced stretching hot air oven and principal technical index of the line reach international advanced level.The line has the performance of high speed.Top yield, low energy consumption., good forming quality of the fiber dru.The structure of the line is compact with a pleasing appearance smooth running, flexible and reliable control sophisticated Diameter of screw¡¨ºo65mm
This machine uses the polypropylene(pp) or high density polyethylene(hdpe) material to produce tapes for ppwoven bags, weaving through production procedures of material heating & extruding, splitting the film into tapes.Stretching & forming tapes, and then winding on the bobbins by winding machine, finally put the bobbins with tapes on circular loom for weaving. The tape extruding & stretching machines are our, with the use of special and advanced technology, we have refored this series machine many times.Through iproving, the machine can be fit for all kinds of pp&pe material, such as 100% recycled material, powder or grain material, to produce tapes.The screw and barrel of extruder are ade of high quality 38croa1a alloy steel, the hardness is over hv950 after nitriding treatment.It has the performance of easy operation & Motor power of extruder is 18.5kw Heating power of extruder is 24kw Width of die-lip is 600mm Diameter of drum is 320mm Number of arch heating plate is 2pcs Heating power of the plate is 15kw Stretching ration is 4-7 Production capacity is 30-80kg/h Winding speed is 20-150m/min Number of winder is 100spindles System installed capacity is 98kw Normal operational capacity is 64kw Weight is 8000kg Overall dimension(j*w*h) is 23600*2500*1800mm
This machine is absorbed from international advanced technical and manufactures by ourself, which major in producing monofilament yarn by hdpe and pp material The monofilament yarn can be widely used for rope, fish-net, safe construction net, article hair, mosquito nets brushes as well as protectives nets for the cotton fields. The assembly is compacted in its structure.Ad motor is used for drawing thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters.The spinnerets produced by the most advance way so that the flatness and eveness of the filaments can be ensured.Stability in motion, sensitiveness in control, convenience operation, high safety and reliability. ¡êabrush monofilament ¡êaropes ¡êafishing line ¡êafishing nets ¡êavelcro monofilament ¡êamosquito nets ¡êazipper onofilament ¡êaconstruction safety nets Model is sj-ys-45 Diameter of screw¡ê¡§mm¡ê© is 45 Rotation of screw¡ê¡§r/min¡ê© is 10-50 Capacity¡ê¡§kg/h¡ê© is 20-45 Diameter of yarn¡ê¡§mm¡ê© is 0.1-0.35 Line speed¡ê¡§m/min¡ê© is 100-150 Number of spindlers is 100 Install power¡ê¡§kw¡ê© is 90 Overall dimensions¡ê¡§m¡ê© is 23*1.7*1.7
Parameter specification Jo-65jo-70jo-80jo-90 Specification/parameterdouble-shaftdouble-shaftdouble-shaftbig-shaft Pay-off typepn400-630pn400-630pn400-630pn630-800 Pay-off bobbin¬)65¬)70¬)80¬)90 Screw diameter26:1 bm type26:1 bm type26:1 bm type26:1 bm type Screw l:d120140200250 "extrusion Capacity(kg/h)"25hp30hp40hp50hp Main motor power¬)0.8-¬)1.0¬)1.5-¬)12¬)2.0-¬)20¬)3.0-¬)25 Range of wire diameter(mm)"single layer/ U shape""single layer/ U shape""single layer/ U shape""single layer/ U shape" Cooling device 250m200m200m200m Length of accumulating 5hp5hp7.5hp7.5hp Haul-off power500m/min500m/min400m/min400m/min Line speed (max)double axis/axisdouble axis/axisdouble axis/axisdouble axis/axis "take-up Type"pn500-630pn500-630pn500-630pn500-630 "take-up Bobbin"4hp4hp5hp5hp.
1reasonable structure , new , stable , high speed , round trip quality control 2.High automatic & intellect monitoring , perfect winding displacement . 3.Jo-»65+35 double color automobile cable extruder : selected at customerf+s requirement 4.Initiative wire pay-off, flyer pay-off , quincunx take-up, auto coiler take-up and complete plc control.
Screws and barrels for extruder machine Depth of nitrated layer: 0.5-0.8mm Hardness of nitration: 900-1020hv Fragility of nitration: less than grade 1 Surface roughness: ra 0.4um Surface hardness of nitrated cr coating layer:í²950hv Hardness of bimetallic layer: hrc55íp-72íp Thickness of cr-coating layer: 0.03-0.08mm Depth of bimetallic layer:ú+2mm Specifications of screw: ª)20-ª)250 l/d 15-50 we offer various types of extruder screws and adjust to different compression ratio, which can fulfill customer's requirement perfectly.
1 The screw and cylinder are nitrogenation treated and precise processed. So it is hard, wearable and anti-cauterization. 2 The whole set adopts perch brake driving. So the rewinding is very smooth. 3 The electric part adopts brake driving. So it can help to save power 30%. 4 The noise is low, no dust, environmental and power saving. Installing Dimensions (m) 13¡Á1.3¡Á1.2 weight 2000kw.
Teflon ptfe extruder Plastic ram extruder machine features: 1, automatic control 2, easy to operate 3, low power consumption 4, product size stability 5, precise sintering 6, environment-friendly and energy-saving Application: Ptfe ram screw extruder products tube, and it has the best chemical corrosion resistance and the dielectric properties, not aging, not sticky, it also has the lowest friction coefficient. So the tube has a wide range of applications Model no. Machine model pfb-80 Plastic extruder Ptfe Power 20 kw Min - max dia 25-80 mm Tolerance 0.5-2 mm Length Unlimited Production per hour 7kg Electricity consumption per hour 2.5 kw Weight of the machine 960 kg High of the machine 1560 mm Floor area of the machine 1.2 m2 Warrenty for parts 1 year Machine gurantee period 1 year Free spares 1 set Deliver lt 30 days About us: Changzhou sunkoo machine tech co., ltd Professional experience: 10+ years only in the field of the ptfe extruder Manufacturing capacity: 50 sets / year. Technology strength: have a professional and experienced designer team to meet your any requirement Model ptfe series is a single screw extruder for extruding dia lower 150mm rod and dia lower 500mm tube. The automatic production line is controlled by computer, which is really easy to operate. Meanwhile, the plastic extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. We can solve various problems to improve the equipment efficiency for you. Hot tags:teflon ptfe rod;teflon ptfe tube, teflon ptfe extrusion -
Extruder Screw barrel:38crrm nitriding Gear-box:hard-toothed cover Vacuum venting device:vacuum degree:0.08mpa Forecd feeding system motor power:1.1kw Electric machine: low pressure electric machine:simenz; Temperature control: omron, intelligence module control Scerw diameter:80/156 alloy Screw rotary speed:1-36.9rpm. Main moter power:55kw, frequency control Frequency adjuster: fuji Barrel heating power: 36kw cast aluminum heating ring; Stainless steel out shell, air-cool constant temperature 11.Capacity:>400kg/h Size:5500*1500*2400 Weight:5000kg Pe film
Extruded Plastic Teflon PTFE Tube Extrusion line (Φ150-300mm) PTFE ram extruder line is able to extrude ptfe/Teflon tube which dia from 150mm to 300mm. The automatic production line is computerize controll, which is really easy to operate. Meanwhile, the plastic Teflon extrusion machine is advance designed, high output, low energy consumption, long-life, and also our professional engineer is available to offer overseas after sale service. The extrusion machine had has continue improved in past 10 years with high quality and stable operation. PTFE machine Ram extrusion machine for Teflon PTFE Tube The China vertical PTFE RAM Extruder is designed with 2 pressure plates, so the ream is affected via a slid pressure plate. The China tube ram extruder is equipped with two hydraulic cylinders. The main cylinder serves to move the ram; the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled. The PTFE Molded powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould. Range of diameter PTFE Extrusion 150 to 300 mm, Heating zones 5 zones The complete electrical control is laterally fastened at tube ram extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. 4-6 temperature regulators are contained in the plant, four for the extruding ptfe and one automatic controller for a mandrel heating element. The maximum output speed of PTFE extrusion depends on: PTFE Material, outside PTFE tube diameters and PTFE product heating length. PTFE Equipment Warranty: according to our standard terms: 12months Technical Specification: PTFE Tube Extruder Dia 150mm-300mm Technical Data of PTFE machine Description Model No. Machine model PFG-300 Plastic Extruder PTFE Tube Power 25 kw Min - Max Dia 150-300 mm Tolerance 0.1-0.2mm Length Unlimited Production Per Hour 7-14kg Electricity Consumption Per hour 1.5 kw Weight of the Machine 1980 kg High of the Machine 2960 mm Floor area of the Machine 4.6 M2 Warrenty for Parts 1 Year Machine Gurantee Period 1 Year Free Spares 1 set Deliver LT 30 Days
PFG600 Single Screw Extruder Features: Save time and money. PLC design and easy to operate. Long time span. No heating effect during operation. With latest technology and optimized design. Min - Max Dia:300-600mm. Production Per Hour: 9-18kg/h. Unlimited Length Automatic operation. Polymer PTFE ROD RAM EXTRUDER AUTOMATIC MACHINE Product Description- RAM Extruder For PTFE Tube(300-600mm) Sunkoo PFG600 Tube Extruder is to extrude PTFE/UHMWPE Tubes. It is designed using latest technology, fully reliable and easy to operate for customers. Performance in terms of production and working hour capacity is competitive to other machines. Low maintenance is required , giving high production in market. PFG600 Single Screw Extruder Features Include: 1.Vertical Ram Extruder for PTFE Tubes 2.Ram extruding machine for PTFE Tubes. 3.Using for Pre-sintering PTFE material. 4.Suit for new PTFE material or Recycle PTFE material. 5. Adjustable Heating zone: 5 zone area 6. Long service life through solid workmanship and use of high quality components. 7. Measurement transducer like pressure, force and ram speed for permanent control of the extrusion process and extrusion speed. 8. Measuring and controlling system for constant extruder speed 9. Low space requirement through vertical construction 10.Operating through touch screen and recording of the extrusion process parameters Benefits: 1. Save time and money, good advantage price offer to customers. 2. Intelligent and easy-to-use operations. 3. Small workplace required due to its compact design and electricity saving machine. 4. Super quality output and the physical properties is adjustable. 5. Precise temperature control, reaches + -1 degree. 6. Long- life, with modern technology and optimized design. Q&A for Vertical Type Tube Ram Extruder Machine · Which is the maximum extrusion capacity in sintered liner in meter per hour? A: Can change pressure time, each extrusion length and temperature to adjust the speed depend on size and wall thickness. about 1500 to 2500mm per hour.
HDPE/PP/CPVC Double Wall Corrugated Pipe Extrusion Line-SBG63 Introduction: 1. Diameter Scope: (ID) 32mm-63mm 2. Double Wall Corrugated Pipe Line Features: In order to meet the demand of plastic pipe market,HUASU Company designed and developed this Double Wall Corrugated Pipe Extrusion Line by technology Innovation. SBG63 adopts directly extrusion (single extruder or two extruders co-extrusion) and forming technology. It makes high automation degree,reliable quality and stable production become true. Extruder: High speed and efficiency single screw extruder, grooved barrel, equipped with the lower noise fan, high speed and hard gear reducer. It can make the inner and outer layers produce different material and guarantee high efficiency extrusion. Die Head: It adopts spiral type special structure design,small volume,and clean flow. This structure can effectively eliminate internal stress of corrugated pipe, remove the weld pipe vestige,and make the corrugated pipe inner and outer layer wall thickness even and forming stability. Corrugator: Corrugator adopts chain type transmission,equipped with open water cooling system. It greatly increases the production speed. Mold Blocks moving adopts advanced synchronous upper and lower mechanical drive system. It assures moving accuracy and plastic pipe quality stability. Advanced self-lubricating system makes the forming molds and mold plates abrasions minimize and greatly extend the service life. Winder: Torque motor, single/double station automatic winder. Control System: This production line adopts SIEMENS PLC control system,color touch screen human-machine interface,reliable running,easy operation,remote communication function which can realize remote fault diagnosis and rule out the possibility. Or adopts normal control system according to customer's requirement.
Extruding snack machine Wooden case
Specification: Screw diameter: d15- d 300 L/d ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: general type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing oil coated& film wrapped in wooden case
Acten Turnkey Project offers our customers complete training on achieving the correct profiled rubber dimension for further processing into precure tread at a later stage. Certified skills in operating the extrusion line can be attained in a short period of time. The extrusion line that Acten offers includes: -2 roll mill -Hot/Cold/Pin-cold feed Extruder -Cooling trough -Profile identification marker -Pneumatic cutter.
It is machine to adjust the mixing of pu, polysulphite and silicone type materials. This operating system is especially designed for the insulating glass production and improved. This machine can also be used as filling the cartridges by only releasing the mixing system. The mixed material can also be taken out of the gun. System works hydraulically and b component may work pneumatically if required. How to introduce the materials: A and b components seperately handled by the hydraulic system pumps. When the material is reloaded, it is necessary to empty the air inside the machine. Besides, time heaters available on specific parts to avoid the improper working under cold weather conditions. Mixing ratio: A and b component can be controlled seperately by either hydraulic system or dosing pump. The adjustment can be made as desired by any ratio figures are between 1:6 and 1:16 Mixing system: The mixers by the end of the extension output hoses mixes the materials homogenously and completely. Cleaning: It is necessary to clean and maintenance the machine after long periods of idle being of production. When the mixed material is forgotten inside the machine for a period of time, machine itself warns by the use of alert lamp. B component key is switched to the opposite direction allowing the by-pass system to fill the mixers with a component and so unwanted freeze can be avoided. Technical specifications: Mixing ratio: 1:6 / 1:16 Material output: approx 2.7 kg./min. Which may deviate according to material used Operating system: hydraulics ( a ve b compenant. B component may be pneumatic.) Operating pressure: between 250 - 450 bar Air pressure: max. 6 bar Power supply: 3 kw (380 v 59 hz.Expect the heaters) Controlling system: plc controlled Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm Weight: 685 kg. Dimensions: 1700 x 1050 x 100 mm In wooden case
we are design,manufacture ,export supply full series of plastic extruder machines,suitable manufacture 'PVC pipe,construction parts,statiobery items,etc. we also have others plastic production machines,help our customer resolve All requirement problem .
Description: Soybean extruder consists of driving system, feeding device, extruding device, and electric control cabinet etc. This machine can transfer mechanical energy to thermal energy by extrusion, friction and shearing function of non-equidistance screw extrusion system, and form a certain pressure and temperature in the extruding chamber. Application The soya bean extruder machine is designed to bulk soya,corn for animal feed making with high protein,widely used as source of protein in animal diets, including pig, chicken, cattle, horse, sheep, and fish feed.It is widely used in soybean, maize,soybean meal, cottonseed meal, rice bran and other raw materials. Advantages: 1.High temperature and pressure can effectively kill the bacteria and detoxicate, changing the nutrition resistant factor, lowering the degradation of nutrients, improving the digestibility of protein and starch. 2.Screw and barrel are designed optimized to get longer service life and lower production cost. 3.Novel design, high output, stable operation, the main components is heat treated special alloy material refined, with a high degree of wear resistance and long life. Parameter: Model Capacity (kg/h) Main Power(kw) Feeding Power(kw) Screw Dia(mm) DGP40 30-40 5.5 0.4 �¦40 DGP50 60-80 11 0.4 �¦50 DGP60 100-150 15 0.4 �¦60 DGP70 180-200 18.5 0.4 �¦70 DGP80 200-300 22 0.6 �¦80 DGP100 300-400 37 0.8 �¦90 DGP120 500-600 55 1.5 �¦120 DGP135 700-800 75 2.2 �¦133 DGP160 1000-1200 90 3.0 �¦155 DGP200 1800-2000 132 4.0 �¦195
Grace Food Processing and Packaging Machinery Offers A Complete Fully Automatic Kurkure Production Line Manufacturer Fried Extruded Snacks Line , Rotary Head Extrude in India for for making Cheetos, Nik Naks, Jiggies corn snacks, Extruded fried corn snack processing machine,Fried Extruded Snacks Line, Rotary Head Extruder, Kurkure Production Line Manufacturer
