Epidural Catheter Perifix FX 19 Gauge Open Tip UOM: 25/CS Product Number: 333514 Manufacturer: B Braun
Epidural Catheter Perifix FX 19 Gauge Open Tip UOM: 25/CS Product Number: 333514 Manufacturer: B Braun
Suction Catheters Product Code: MED 106 Specifications: Sterile, individually packed in blister pack Size/Strength: Plain 500 mm L | TC 480mm L | FT 470 mm L | Automatic 500 mm L 5 mm-Grey, 6 mm- Green, 8 mm-Blue, 10 mm-Black, 12 mm-White, 14 mm-Green, 16-mm Orange 18-mm Red 20 mm Yellow Description Manufactured from nontoxic, non-irritant medical grade PVC Compound. Distal end is open with one lateral eye for effective drainage. Proximal end is provided with connecter for easy connection to the suction equipment. Funnel connecter are color coded for instant size identification. Provided with vacuum control facility in Finger Tip Control and Thumb Control models. Available with graduation.
lnfant Mucus Extractor Product Code: MED 148 Specifications: Sterile, individually packed in peelable pouch pack Size/Strength: Chamber Capacity 25 ml, Catheter Size 10 FG Description Manufactured from nontoxic, medical grade polymer. Transparent Chamber for visual examination of the content. Catheter is provided with round open tip for non-traumatic intubation. Proximal end of suction tube is provided with Funnel shape connector for easy connection to the suction equipment. Also, available with Filter and without Filter Models
Anesthesia Tube Description of productsImported nylon elastomer PEBAX, soft material¡ê¬excellent biocompatibility, wont cause tissue damage; high tensile strength, not easy to break; good radiopaque effects with opaque X-ray developing line; careful punch made, accurately position with 360cm degrees clear scale mark; pipe head 3 ~ 5 mm outer softening,can be helpful for catheter, tube drawing, reduce tissue injury and vascular pierced risk, which wont cause spinal canal back wall damage. b. SpecificationSpecial size can be customized General 16G-20G Soft tip Epidural Anesthesia Tube Strengthen Epidural Anesthesia Tube Resistance to bending, steel wire) c. UsageUsage: Mainly used in clinical surgery epidural anesthesia, and transport anesthesia and analgesia liquid medicine for the patient. d. RemarkWe can provide the products according to your requirement. (Sample/ Drawing is ok). Usually wraped with double PE membranes and cartons outside or according to your requirement
Peritoneal Catheter, Small, Barium Impregnated, 90cm, a pressure valve at the tip, 4slit openings at the distal end. High, Medium, Low pressure are available according to the size of slit. Features 1.Tubing impregnated with white barium to provide radiopacity. 2.Ppressure control valve. 3.Enable the surgeon to gauge and adjust its length.
Medical Supplies, Surgical Products, Contact Lenses & Solutions, Optical Devices Etc, Laboratory Products, Laboratory Equipment, Diagnostic Reagents, Needles, Blood Glucose Meters, Blood Glucose Test Strips, Cosmetic Products.
DIALYSIS Blood Lines, Fistula Needles, Peritoneal Dialysis Set (Y Shape I.V. Set) SOLUTION ADMINISTRATION SETS Infusion Sets, Extension Tubes, 3 Way Stopcocks, Volume Controlled Solution Admin. Sets BLOOD ADMINISTRATION SETS Transfusion Sets, Volume Controlled Blood Administration Sets C.V.P.s C.V.P. Manometers, C.V.P. Catheters (Single / Double / Triple / Quat.), C.V.P. Complete Sets SUCTION DISPOSABLES Suction Cath., Suction Lines, Connectors, Surgical Suction Tips, Complete Suction Sets OPEN HEART SURGERY Extra Corporeal Tubing Set, Connectors, Cardioplegia Sets, Under Water Chest Drainage OXYGEN NASAL CANULA SURGICAL DRAINAGE Surgical Drainage Units (Ready VAC), Chest Drainage Bottles STERILIZATION PACKAGING Sterilization Rolls (See Through), Sterilization Pouches, Sterilization Wrapping Crepe Sheets SURGICAL GLOVES (STERILE).
Fx-140b technical specification Max. Fitting size: 2.5" 6-spiral hose ~4" 4-spiral hose Theoretical crimping force: 560ton Die opening & closing: +/- 50mm Max. Opening diameterú¦ 230mm Motor size: 5.5kw Electrical requirement: (380~415)v/50hz --(440~480)v/60hz. 3phase Full crimping cycle: 13s Accuracy: ín0.01mm Un-even: ín0.3mm Weight (w/o oil): 800kg Die-sets supplied: 16, 19, 23, 27, 32, 38, 44, 50, 56, 62, 68, 78 Dimensions (líßwíßh): 950íß650íß1750 (mm) Die no. Range(mm) Length(mm) Die no. Range(mm) Length(mm) 16 16-19 75 44 44-50 85 19 19-23 75 50 50-56 85 23 23-27 75 56 56-62 85 27 27-32 75 62 62-68 85 32 32-38 85 68 68-74 85 38 38-44 85 78 78-84 85
woven Stucco Mesh Netting to Reinforce Roof and Wall Stucco mesh refers to galvanized woven hexagonal wire mesh supplied in rolls. The metal wires are low carbon steel wire, stainless steel wire, iron wire or redrawing wire. Stucco netting can be installed on curved or inclined place due to its flexible. It can hold plaster, cement on roof, wall, ceiling, floor or tile to reinforce them. Stucco wire mesh also can be used as chicken wire, bird cage, fish fence, rockfall netting and so on. Specifications: Material: low carbon steel wire, stainless steel wire, iron wire, redrawing wire. Surface treatment: galvanized. Mesh opening shape: hexagon. Weaving method: normal twist (double twisted or triple twisted), reverse twist (double twisted). Two standard zinc coating for hot dipped galvanized: Normal zinc coating: 50-60 g/m2. Heavy zinc coating: 200-260 g/m2, maximum zinc coating is 300 g/m2. Height: 0.3 m - 2 m. Length: 5 m, 10 m, 20 m, 25 m, 30 m, 35 m, 50 m. Height and length can be manufactured according to your custom. Features of stucco netting Insulation, refractory, durable. Resistant to corrosion, rust and oxidation. Stable structure, smooth surface, uniform mesh size, high tensile strength. Unroll easily, cut easily. Use simply, only need pave the mesh on the wall. Electro galvanized wire mesh has lower cost and bright color. Hot dipped galvanized wire mesh has better corrosion and oxidation resistance. Galvanized before weaving wire meshes offer better performance of rust and corrosion resistance. Applications of stucco netting Hold plaster, cement on roof, wall, ceiling, floor or tile to reinforce them. Feeding chicken, rabbit, duck, geese, fish and other poultry or small animals. Style can be fence and cage. Protect vegetable, flower or small plant from poultry and small animals. Equipment and machines protection, highway fence, tennis court fence, protection fence for road greenbelt. Control and guide water, even flood. Protect seawall, river bank, riverbed, pier. Retaining walls. Channel lining. Prevent rocks and debris from falling onto roads and railways. Galvanized stucco mesh in normal twist Mesh sizeWire gauge (BWG) inchmm 3/8"1032, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21 1/2"1327, 26, 25, 24, 23, 22, 21, 20 5/8"1632, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21 3/4"2025, 24, 23, 22, 21, 20, 19 1"2527, 26, 25, 24, 23, 22, 21, 20, 19, 18 1-1/4"3223, 22, 21, 20, 19, 18 1-1/2"4023, 22, 21, 20, 19, 18, 17 2"5023, 22, 21, 20, 19, 18, 17, 16, 15, 14 2-1/2"6521, 20, 19, 18 3"7521, 20, 19, 18, 17, 16, 15, 14 4"10019, 18, 17, 16, 15, 14 Galvanized stucco mesh in reverse twist Mesh sizeWire gauge (BWG) inchmm 1"2525, 24, 23, 22, 21, 20, 19, 18 1-1/4"3223, 22, 21, 20, 19, 18 1-1/2"4023, 22, 21, 20, 19, 18, 17 2"5023, 22, 21, 20, 19, 18, 17, 16 3"7520, 19, 18, 17, 16
Crimped / double crimped wire mesh are of heaviest quality and accurate mesh which are made by spring steel, carbon steel, high tensile steel wires in different wire diameters generally used for screening, mines, quary industries, fabrication work etc. The perfect crimping insures the wire lock firmly together at the intersections. The opening and extra crimping is important. We provide the mesh with extra locking & tightness for less thickness wires. Specification list ofcrimped wire mesh/wire mesh for roast Wire gauge Swg Wire diameter Mm Mesh/inch aperture Mm Weight Kg/m2 14 2.0 21 1 4.2 8 4.05 18 1 15 25 0.50 20 0.61 2.6 23 0.61 18 0.8 3.4 24 0.55 16 0.1 2.5 24 0.55 14 0.12 4 22 0.71 12 0.14 2.94 19 1 2.3 0.18 1.45 6 4.8 1.2 2 20 6 4.8 1 2 20 6 4.8 0.7 3 14 14 2.0 5.08 0.3 12 14 2.0 2.1 1 2.5 14 2.0 3.6 1.5 1.9
Copper tri-ply cookware set Description Real deal wholesalers is proud to offer these pieces of professional tri-ply copper cookware at a fraction of suggested retail price ($799.00). This cookware easily competes with name brands such as calphalon and all-clad. Crafted to our exacting specifications this cookware carries our store name as the brand. This cookware is mainly sold to restaurants in canada and the us, but is an excellent value for the astute home gourmet. Here are a couple of comments we received from buyers who actually compared this cookware to their all-clad. 1) "very pleased with purchase. Cookware is very similar to my expensive all-clad". 2) "you were right, this is very close to my all-clad. " When you open the individually boxed pieces you will find each piece has a gleaming 18/10 stainless steel cooking surface, aluminum core and spectacular heavy gauge copper exterior. The three layers are perfectly laminated to give the cookware a thick 2.5mm base, commonly seen in popular high-end brands, often 3-4 times more expensive. The cast steel handles are riveted and polished to match the stainless steel cooking surface. On average copper conducts energy 30% better than other metals commonly used with most cookware. Chefs all over the world realize copper gives them exact control when cooking. This is why copper is used in quality cookware. Set includes * 1- 8.25" saute pan * 1- 9.5" fry pan with lid * 1- 3qt sauce pot with lid * 1- 5.5 qt sauce pot with lid * 1- 5.25qt stockpot with lid Sold as set in shipping box 25 pounds per shipping box (19" x 19" x 16"(high))
With more and more attention on decorative style and creativity, chain link fence gate is widely used to decorate yards, gardens and to protect their property. The chain link fencing materials are durable and cost low and no maintenance. Chain Link Fence Gates Have Five Types: Walk Gate, Single Gate, Double Swing Gate, Cantilever Gate And Roll Gate. Black Chain Link Fence And Gates Technique Specifications: a) 1.2mt high black powder coated chain link fencing and gates as follows: Gate and end posts 40NB galvanized steel powder coated black Posts 32NB galvanized steel powder coated black 2.4mt centers Top rail 25NB galvanized steel powder coated black Attached to posts with black powder coated down fittings Chain wire galvanized steel black PVC coated, 60x60 diamond Bottom cable black PVC coated* 3 sets double gates 25NB frame powder coated black 3.2mt opening size, black chain wire infill. b) Gates is swing type, hinged to swing 180 degrees from closed to open, complete with frames, latches, stops, keepers, hinges, fabric, braces, and PVC coating wire mesh(50¡¨¢50), diameter 4mm. c) 42 x 42", 42 x 48", 48 x 48", 42 x 60", 42 x 72" single walk fence gate 1 3/8" tubing hot dipped galvanized 12' x 42", 12' x 48", 12' x 60", 12' x 72" double drive fence gate 1 3/8" tubing hot dipped galvanized 6' x 6', 6' x 12' kennel panel 1 3/8" tubing hot dipped galvanized Cattle/wrangler panels with bow gate and cattle wrangler panels with hardware attached: 18 gauge or 1.2mm thick. Galvanized then powder painted brown. Tube gates: 18 gauge or 1.2mm thick. Galvanized then powder painted brown. How To Make Chain Fence Gates If you do not want to buy a chain link fence gate and then do it by yourself, install it where you want to install. This is not difficulty things, so you can save a lot of spending. Tools used in the production process: tape measure, gate post hinges, gate fork latch, bolts, sockets, wrench, chain links, gate frame, brackets, solder, pliers. Here are chain link gate installation steps and tips. First: under the instructions, make a gate framework and the first part attached on the sliding belt. Then sliding parts are assembled door frame with your hands. Second: sliding a rod into the fence and through a coil. Third: attach the tension band and slide the second lever into the mesh. Make sure you slide it close enough to the opposite side rail to hold the mesh taut once you attach it to the tension bands. Fourth: unhook the strand of mesh that's near the outside second tension bar and pull it out, removing the excess mesh with pliers. Fifth: pull the mesh along with tension band tightly while slipping the tension bar into the tension bands on the frame of the gate with pliers, if the net is not tight enough the lever to into go to the next set of loops. Unravel the excess mesh and hook the bar back into the tension bands. Final: attach the tie line to the benchmarking of the top and bottom once the mesh is fixed in one place. A Cable line in the mesh around the hook with pliers, pulled the network cable has been slightly higher than the door frame to the network. Ensure let the tie cord around freely in the mesh around with pliers. Tips: his metal hardware must be ready to complete. In order to switch the gates must be to the height of the ground. Packages for fencing and accessories. We usually transport the fencing in rolls and accessories in decking.
Hexagonal wire netting(chicken wire) Hexagonal wire netting is also called chicken wire, its materials with high quality low carton steel wire or stainless steel wire etc, as our leading goods, it could make electro galvanized, hot dipped galvanized and pvc coated , the varieties as follows: 1) electro galv. Hexagonal wire netting :galv. After weaving 2) electro galv. Hexagonal wire netting : galv. Before weaving 3) hot dipped galv. Hexagonal wire netting : galv. After weaving 4) hot dipped galv. Hexagonal wire netting : galv. Before weaving 5) pvc coated hexagonal wire netting 6) stainless steel hexagonal wire netting The above products could weave in continuous twist or reverse twist with extension wires. Application : it used wide in building, oil, chemical industry, breed, plant protection , food processings reinforce guard and heat preservation , for example: make net cast , stone cage , insulated net wall , boiler cover , poultry fence etc. Galvanized hexagonal wire netting Opening Wire gauge Width per roll Inch Mm Tolerance Bwg Mm Feet Meter 3/8" 10 +0.5 Bwg 27-23 0.41-0.64mm 1'-6' 0.1-2m 1/2" 13 -1.5 Bwg 27-22 0.41-0.71mm 1'-6' 0.1-2m 5/8" 16 +1.0/-2.0 Bwg 27-22 0.41-0.71mm 1'-6' 0.1-2m 3/4" 19 +1.0/-2.5 Bwg 26-20 0.46-0.89mm 1'-6' 0.1-2m 1" 25 +1.5 Bwg 25-29 0.51-1.07mm 1'-6' 0.1-2m 1.25" 31 -3.0 Bwg 24-18 0.56-1.24mm 1'-6' 0.2-2m 1.5" 40 +2.0/-4.0 Bwg 23-16 0.64-1.65mm 1'-6' 0.2-2m 2" 51 +2.0/-4.0 Bwg 22-14 0.71-2.11mm 1'-6' 0.2-2m 3" 76 +2.0/-4.0 Bwg 21-14 0.81-2.11mm 1'-6' 0.3-2m 4" 100 +2.0/-4.0 Bwg 20-12 0.89-2.8mm 1'-6' 0.5-2m Remarks: 1. Special sizes are available upon request.. 2. Packing: in waterproof paper or carton. Customer's packing is available upon request.
Product Features Of Vending Machine: Steel Cabinet,security design,easy for installation and maintenance. Advanced and stable vending technology,with statistics,query,fault diagnosis. This product is mainly applicable to all types of small items. Material: * Large glass window to display goods.( tempered glass , safe and convenient ,display goods explicitly ) * HD Touch Screen,contact sensitive and easy to operate. * Customized card payment, coin payment. * Anti-Theft Lock, the take off port is equipped with a linked anti-theft baffle,which is closed at the same time of pushing. * Open 24 hours, take care of your health all day. Quality Face Mask Vending Machine from Smart Vending Machines Due to the outbreak of COVID-19, everyone has been advised to protect themselves and remain safe. One of the safety tips recommended by the World Health Organization and medical experts is to put on face masks. Especially when outdoors or in public places, wearing a face mask can prevent you from contacting viral infections. To ensure that face masks are made available at the fingertips of individuals and families, Smart Vending Machines developed the face mask vending machine. This vending machine can dispense face masks and other personal hygiene products such as hand sanitizer, disposable gloves, and anti-bacterial tissues. About Our Face Mask Vending Machine Smart Vending Machines is a reliable provider of vending machine service based in Melbourne, Australia. Our company specializes in building custom smart software vending machines. Our face mask vending machine was developed to make it easier for the general public to have access to face masks and personal hygiene products. What's more, our face mask vending machine will ease the process of dispensing face mask, which will help curb the continuous spread of the COVID-19. Asides face masks, the vending machine can also dispense personal hygiene products such as hand sanitizers, disposable gloves, anti-bacterial tissues, and lots more. All these will help keep you safe, especially when outdoors. The face mask vending machine is fully automated. This vending machine offers a relatively safe and easier way to maintain basic personal hygiene and protect yourself against contacting any viral infection. To get a face mask, you can activate the vending machine using your mobile device, email link, credit card, staff RFID card, or QR code. Likewise, we can build the vending machine to use other custom requirements. Hence, since the vending machine can dispense face masks and other hygiene products, residents and businesses in Melbourne, Sydney, Brisbane, Canberra, Adelaide, Perth and Darwin, Australia, can have easy, 24/7 access to any of these items. With this, they can remain safe whenever they are outside. No to wait for long hours at the grocery shop or supermarket just to get a face mask.
Drive mechanism Electro- mechanical drive unit is operated by micro processor based Control panel. The drive unit consists of gears, shaft, crank, safety clutch and ball bearings etc. Which are encapsulated in weather-proof, oil filled chamber for maintenance free and long lasting performance. The operation of the Drive Unit is silent and maintenance free. Elecrical motor + HP reversible motor 24V DC, 900rpm, 40watt, maintenance free, reversible motor is designed for heavy duty operation. Dual speed and electronic braking provide optimum time for opening and closing with soft landing. Opening and closing time (2-10 sec.) can be adjusted at the site during installation depending on traffic frequency and boom length. Control panel The electronic control panel controls the direction and speed of the boom movement it is capable of accepting optional safety devices such as beam sensor, magnetic card reader, loop detector etc. The control panel can be fixed in guardroom or inside the barrier box. Push button A piano type push button is provided inside the guardroom. The barrier is activated by touching the push button for a second. Thus keeping the guard free to pay more attention to security checks. Remote control The barrier can also be activated by remote control from a distance up to 100 ft. depending upon local environmental conditions. Remote Control is an inbuilt part of the barrier and is not charged extra. Optical sensors Optical sensor (Photo beam sensor) if installed will forbid boom to come down as long as a car or a person is underneath the boom thus, extra safety is added to vehicle and boom itself (Optional). BATTERY BACK-UP In case of power failure, battery backup operation is available (Optional). Continueà..2 -2- Proximity card for unmanned barrier and limited access car parking, proximity cards/smart cards/ Biometric access systems of any make can be integrated to HOM barriers at any stage. AUTO-CLOSE MODE If auto close mode is selected in control panel, the barrier will close automatically after a preset time (10 seconds). BOOM The boom is made of non-corrosive anodized octagonal aluminum of 2mm thickness, 102mm(H) and 57mm(W). The boom length varies from 4 ft. to 30 ft. Octagonal boom profile for better visibility, strength and aesthetics. COUNTER WEIGHT M. S. Metal, rectangular shape. BOOM STAND The boom rests on a stand of height 825mm made of 77mm dia pipe of 3mm thick mild steel. BODY The body housing of the barrier is made of GI sheet of 18 gauge with dimensions: 395x283 mm x 1067 mm. The body is placed on a concrete platform with a specially designed M S angle platform bolted with the body. The weight of the entire barrier varies from 50 kg to 250 kg depending upon model. PAINT The barrier body is powder coated in Red colour. White boom has reflective Red tape stripes and a STOP sign in Red at the center of boom. IN-PUT VOLTAGE 200 û 250 V / 50 Hz. MODEL NO. WEIGHT APPROX. INPUT VOLTAGE BOOM LENGTH ADJUSTABLE OPENING TIME HB - 1000 60-80 kg 200-240 Up to 8 ft. 1.5- 4 Sec. HB - 2000 90-150 kg 200-240 9-12 ft 3- 6 Sec. HB - 2010 160-200kg 200-240 13-18 ft 4- 8 Sec HB - 2020 200-250kg 200-240 19-24 ft. 6- 10 Sec All dimensions and weight are approximate. HOMÆs continuous development program may bring specification changes without prior notice. The body housing of the barrier is made of GI sheet of 18 gauge with dimensions: 395x283 mm x 1067 mm. The body is placed on a concrete platform with a specially designed M S angle platform bolted with the body. The weight of the entire barrier varies from 50 kg to 250 kg depending upon model.
Please read completely through these insturction before using the crimper. your DOUGLAS DE 1600 HAND CRIMPER is supplied factory pre-set for quic change-over between most aluminium window systems. PLEASE NOTE : The crimping bench should be constructed in such a way as to offer suitable support for the material being crimped, in order to protect material being crimped from damage, it is advisable to cover the bench bearers with carpet to similar and keep the surfaces clear of swarf or objective likely to damage material surfaces. SETTING UP Remove crimper from box, locate on corner of suitable bench, which must be a robust and stable comstruction. Secure to bench with four M10 counters unk bolts or screws. Insert handles into handle sockets and secure with loking screws which must locate into dimples provided on handle ends. Remove toggl clamp from packing and fix to top of anvil block with two M6 x 10 socket cap screws which are located in the anvil block. WARNING : (1) Do not operate the crimper unless both handles are secured as described above, failure to comply may result in the handles slipping out of the sockets and causing a hazard to the operator. (2) The punch heads are sharp and must be handled with care. The DE 1600 hand crimper is designed for two handed operation by one operator only. It is the operators responsibility to ensure that the path of the punch heads are unobstructed are operating the hand lever handles. TOOLING CHANGES ANVIL INSERT (1) Loosen locking screws (R) Fig. 1 and lift of insert (Q) (2) Slide alternative insert into place, ensure face marked "TOP" is uppermost, locate firmly on bottom face or pins, ensuring that the rear face of the anvil insert sits flat against the anvil block. CRIMP PUNCH HEADS (1) Remove completely the retaining screws (J) Fig 1 (2) Pull Punch Heads our of location slots. (3) Clean all location faces. (4) Select correct punch heads to match anvil insert, push into location slots, replace retaining screws (J) and screw down. TOGGLE CLAMP ADJUSTMENT (1) Select short mitred corner from off-cuts of profile to be crimped, insert correct cleat (s) and corner brance (s) and locate corner on anvil insert. (2) Adjust clamp spindle (v) Fig 1. so that when clamp lever locks ito forward locked position the test corner is held by the clamp pd, with a pressure equivalent to a firm finger pressure. (3) Tighten clamp spindle lock nuts. PLEASE NOTE ! If the clamp pressure is set to high, distortion of profile will occur resulting in poor crimping. CRIMPING TEST JOINT Before starting production it is advisable to test toooling changes as follows :- (1) Leave small sample corner piece in position after setting Clamp. (2) Bring the handles in towards the centre until Cr5imp Heads touch the profile. (3) Open box section profiles the crimp action can be performed by applying equal pressure to both handles simultaneously until the Link Ars (F) Fig 1. lock into a straight line with Punch Heads. (4) When crimping heavy gauge or closed box section profiles it may be found easier to hold one Crimp Punch Head firmly against profile for support whilst the other Head is crimped into it's full depth. Then with a slight alteration in stance, the first head can be pushed to it's full depth. (5) Both crimp Punch heads should be withdrawn from the profile simultaneously. PLEASE NOTE ! Under no circumstances should any one Punch Head be used without firm support of the other one. failure to observe this basic rule will result in the profile frame moving on the anvil insert, a poor crimped joint being produced and possible damage to the Crimper. SETTING CHECK The crimper is supplied factory set and has been test crimped prior to dispatch if for any reason the setting of the crimpter is in doubt the following procedure should be adopted. (1) Cut a sample corner of material to be crimped (2) Carefully check the cut and establish that the cut is a true 45, flat and at 90 to both legs of the section. (3) Offer the appropriate setting piece to the anvil insert and check that the setting is as shown Fig. 2 (4) The punch heads tips should engage onto the slope of the cleat as shown and should either just "skim" the setting piece or clear with minimal clearance. (5) The punch heads should ride down the slope until the link arms lock into straight line with the punch heads. The initial setting for the depth to which the punch heads should run is approximaterly two thirds of the full tepth see Fig. 2 The optimum setting is best established by carrying out test crimps and checking results. PLEASE NOTE A Setting Piecd can be made up by fixing with a suitable adhesive, two packing strips to the back of a cleat that is to be used in the system. The packing strips must be eqial in thickness to the wall of the profile to be crimped. ADJUSTMENTS Should the crimpel require resetting, both the anvil position and the depth of bite of the crimp heads are fully adjustable ANVIL ADJUSTMENT 1) Remove the clamp assembly (U) by removing 2 screws (T), this will reveal a socket head screw. Slacken this screw. 2) Slacken the four nuts at the extreme rear of the crimper (S). 3) Using the setting piece as a guide, adjust the anvil towards or away from the crimp punch heads by turning the nuts. Set the anvil so that the crimp punch heads ride down the slope of the setting piece as shown in Fig 2. ADJUSTMENT OF PUNCH HEADS Each ram assembly is secured tgo the casting by 2 screws (P), slaken to allow the punch head assembly to slide in the casting. By slackenning the lock nut and adjusting screws (N), the position of the punch heads can be adjusted. Adjustments should be initially set so that the crimp punch heads run down the slope on the setting piece to approximately two thrids depth. The assembles must be locked in this position by re-rightening the socket screws (P). The final depth setting is best established by carrying out test crimps and making minor adjustments until satisfactory results are obtained. NOTE Setting the bite of the punch heads too deeply is to be discouraged, if set too tight the resulting joits will not necessarily be tight. "bottoming out"on the cleat is not necessary when trying to obtain a good quality crimp. An indication that the cimper is set over tight, is difficulty encountered when withdrawing crimp punch heads from the crimped material Ensure that all the bolts and nuts are tightened after adjustment have been carried out to maintained settings. is it important that when the crimper is finally set, the heads should both run equal depths on the test piece. It is important that the anvil is set so that the crimp punch heads ride down each slope in the same manner, i.e. the anvil must not be set askew relative to the crimp punch heads. MAINTENANCE Standard packing by using wooden box for which we have government policies and standards for safe delivery of the products. we are also arranging the third party inspection for quality of products and packaging which is useful for clearance of goods specifically for Africa.
Epidural Set Perifix Continuous Tuohy 18 Gauge 3-1/2 Inch UOM: 12/CS Product Number: 332200 Manufacturer: B Braun
Epidural Tray Perifix Single Shot Tuohy 20 Gauge 3.5 Inch UOM: 10/CS Product Number: 551703 Manufacturer: B Braun
Used for vertebral body access and infusion During vertebroplasty. • both the inner stylet and the outer cannula are side-beveled to Match. The outer cannula is also back-beveled for improved Purchase on the periosteum. • the side bevel allows the physician to direct the needle to the Desired location.
