Embedded Boards
http://armdevs.Com/ipc-sama5d35.Html Working temperature: -40 to +85 celsius Atmel sama5d34 cortex-a5 cpu, 536 mhz 512 mb ddr2 sdram, 256 mb nand flash Two ethernet support Tft lcd with touchscreen, audio Can, rs485, rs232 support Cm-sama5d35 cpu board feature Cpu processor Atmel sama5d35 arm processor Cortex-a5, working at 536mhz. Ddr2 ram memory 256mb ddr2 ram, 32bit data bus Flash memory 256mb nand flash 4mb spi flash Pin interface 2 x 60 pin 2.0mm space dip connector 1 x 30 pin 2.0mm space dip connector Two ethernet and seven serial port Resource: usb, ethernet, serial, ssc audio, can, sdio, spi, iic, gpio On-board resources Integrated 1gmbit ethernet on board 2 x led Supply voltage 3.3v Pcb size 8 layer, 52 x 64 (mm) Low power consumption, only 0.5w Ipc-sama5d35 base board feature Ethernet Two ethernet port > one gbit ethernet support, rj45 interface > one 100m ethernet support, rj45 interface Serial port Total seven serial port: > debug serial: rs232 level, db9 connector > usart0: rs485 level, connector > usart1: ttl level(5-wire, expand with 2x5pin header com ) > usart2: rs232 level(expand with 3.81 connector) > usart3: ttl level(5-wire, expand with 2x5pin header com ) > uart0: ttl level(3-wire, expand with 2x5pin header com) > uart1: ttl level(3-wire, reused with the audio chips) Can bus: 1 x can bus 2.0 Standard interface Two usb host One usb device interface One audio in/out interface One tf card interface Board resource Key: 3 user key, contain one reset key and two user key One rtc battle Gpio: 16 gpio interface Pcb size: 145 x 110mm, 2 layer Power in: 12v System: linux 3.6.9 Software support U-boot Support update the system by usb disk Support update the system by ethernet Version: linux 3.6.9 Driver support Can driver: support can bus
The MCU and the MINI2440v2 communicate via IIC. Interrupts which may occure on the AVR can be send to the MINI2440v2 via PWREN (External Interrupt).So it becomes super easy to react on an event. On the hardware part,the adjusted hardware design on the MINI2440v2 makes it easy to change components, like the Flash, SDram, displays, etc.reported "weak" components like the I2C is now better supported in HW;A ôcleverö display adapter is now implemented, to which additional devices can be connected easily;More add-on cards are to be developed;While most components and the form factor remain the same with those on the MINI2440. Its produced now ISO9000:14000 certified The attached MegaDisplay 3.5" delivers 320x240px in industrial temperature range on the software part WinC5.0, WinCE 6.0 available now linux 2.6.3x is avail able at kernel.org What's inside the package * The MINI2440v2 PCB * The MegaDisplay 3.5, cable and touch screen * One serial cable to connect your computer with the MINI2440v2 * One JTAG interface (Wiggler compatible) for the parallel port of your PC * One Ethernet cable * One USB device cable * One DVD containing source and binary files for Linux, WinCE 5.0 and WinCE 6.0, u-boot and OS-less code. Specification CPU S3C2440A RAM 64MB Nand Flash 128MB Ethernet 10/100M Ethernet, RJ-45 connector System clock source 12MHz passive crystal RTC Internal real time clock, battery backed Bus 40pin 2.0mm-pitch connector Dimension 100 x 100 (mm) Linux Open Embeddeed with +ngstr÷m LCD module Hiteg 3.5" Mega Display MHz 400-533 WinCE WinCE 6.0 GPIO 32pin 2.0mm-pitch connector Serial ports 3 RS232 1 USB Host 1 USB Device 1 SD card slot 1 Audio Interface In, Out, Mic NOR flash 2MB LCD connector 1 Camera Interface 1 JTAG 10pin JTAG connector .
Features: Main changes from the older version: Add two rows of the holes for the pins. So it can be connected with normal Dupont line. Add 3 rows of the holes for wiring. Change the in-line package of ATMEGA328P to flat package. CH340G replace ATmega16U2 Testing: We program & test all devices with LED blinking Program. Please make sure to connect the device to USB & test if the LED-"L" is blinking, This shows the device is working perfectly (Don't modify program without completing this preliminary test). Usage Instructions: Install CH340 USB Driver (Download: http://goo.gl/NWEz9O ) Connect Board to Computer & Launch Arduino IDE. Select board as "Uno" in Arduino IDE. Select the COM port (You can know COM Port No. in Control Panel > Device Manager). Start burning your programs. Technical Details: Microcontroller: ATmega328 Digital I/O Pins: 14 ( of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40mA DC Current for 3.3V pin: 50mA (ATmega328) of which 0.5KB used by bootloader SRAM: 2 KB (ATmega328) EEPROM: 1 KB ( ATmega328) USB Chip CH340G Package Content: 1 X Piece Arduino UNO R3 Compatible Development Board - ATmega328P CH340. 1 X USB Cable Dupont Pins
We can provide stable and reliable embedded motherboard used for industrial control & intelligent digital media player, mainly applied in automatic ticketing system, automobile, digital control, interactive client, media, advertising, LCD display, traffic control information systems, financial equipment, military industry and all kinds of terminal market. Size Model Resolution 120 x120(mm) EK-BCB750 1920x1080 120x120(mm) EK-BCM667 1920x1080 170x170(mm) EK-BCX6932 1920x1200 146x102(mm) EK-BCB393 1440x900 170x170(mm) EK-BCX693 1920x1200 183x180(mm) EK-BCC940 1920x1080 170x170(mm) EK-BCB131 1440x900
MDF Board ***** Flatt and Smooth surfaces by well sanded *****or MDF Melamine faced ***** Core made from Mix hardwood Fiber *** High Density vary from 720kg - 820kg /m3 depend on thickness *** All sizes available by demand *** usage : Housing components - Furniture components - Carving purposes **** MOQ 40 m3 in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** or 50% Deposit and 50% Balance after received container in buyer ware house and checking quality ***** No L/C accepted due to high Banking fee & Complicated procedures
Hardwood board.
Indonesia Origin MDF Manufacturer and Exporter ***** MDF Board Thickness from 2mm t0 25mm x 1220mm x 2440mm 0r 1830mmx3660mm ***** Flatt and Smooth surfaces by well sanded ***** made from Mix hardwood Fiber *** High Density vary from 720kg - 820kg /m3 depend on thickness *** All sizes available by demand *** also available Melamine face MDF ***** usage : Housing components - Furniture components - Carving purposes **** MOQ 48 cbm in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** No L/C accepted due to high Banking fee & Complicated procedures
Wooden Type: mother-of-pearl wood Size : 30x18x1.5 cm , 46x12.7x1.8 cm, 42x15x1.8 cm, 35x15x1.8 cm, 35x21x1.8 cm Ms Selena
MDF Board ***** Flatt and Smooth surfaces by well sanded ***** made from Mix hardwood Fiber *** High Density vary from 760kg - 820kg /m3 depend on thickness *** All sizes available by demand *** usage : Housing components - Furniture components - Carving purposes **** MOQ 40 cbm in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released *** No L/C accepted due to high Banking fee & Complicated procedures - For saving your time , Please dont send any inquiry for L/C payment
We Are Indonesia MDF MANUFACTURER ## Made from Mix Hardwood Fiber ## Density 720kg-800kg ## Usage for Furniture components - Decoration ## Housing components ## All sizes available ## MOQ 48 cbm in 40ft ## Price range depend on sizes from usd 190/cbm - usd 230/cbm FOB Indonesia main port ## Market oriented : Middle East ,Western Europe , Australia and South Africa ## Payment term by Bank transfer deposit 3% only , No L/C accepted
We Are Indonesia MDF Board MANUFACTURER ## Made from Mix Hardwood Fiber ## Density 720kg-800kg ## Flat and smooth surfaces by well sanded ## Sanding paper number 240 ### High density ***** Usage Furniture components - Decoration ## Housing components ## All sizes available ## Special required sizes can be made ## MOQ 24 cbm in 20ft ## Price range depend on sizes from usd 150/cbm - usd 230/cbm FOB Indonesia main port ## Payment term by Bank transfer 30% Deposit and 70% balance agaist copy of BL only , No L/C accepted due to high Banking cost
Type: Chopping Blocks Commercial Buyer: Restaurants, Food & Beverage Stores, Food & Beverage Manufacture, Department Stores Season: Everyday Room Space: Kitchen, Dining Room Design Style: Modern Material: Bamboo/Wooden Feature: Sustainable Place of Origin: Vietnam Brand Name: 99 GOLD DATA Model Number: Selena +84 587 176 063 Product name: Cutting Board Usage: Kitchenware Color: Customized Color Keyword: Custom Chopping Board Function: Cutting Food Board MOQ: 1000pcs OEM & ODM: Accepptable High Quality: 100% Eco-friendly Description: Chopping Cutting Board Blocks PAYMENT: TT 30% Deposit Supply Ability 20000 Piece/Pieces per Month Packaging Details Poly bag;Shrink package;White box;Color box;PVC box;PDQ display box Port All port in Vietnam
Product Name Particle board/Chipboard Size(mm) 1220*2440mm,1250*2500m, or upon request Glue WR,WBP,E0,E1,E2 Core Poplar, hardwood, eucalyptus, combi Thickness(mm) 1.5-25mm or as your requested Thickness Tolerance +/-0.2mm (thickness
Moisture Resistant MDF 1. In relatively humid environments, such as cabinets or furniture on cruise ships, etc 2. Bathroom partitions, home background walls, etc! Product Name Moisture Resistant MDF Size(mm) 1220*2440mm,1250*2500m, or upon request Glue WR,WBP,E0,E1,E2 Core Poplar,hardwood,eucalyptus,combi Thickness(mm) 1.5-25mm or as your requested Thickness Tolerance +/-0.2mm (thickness
Product Name MDF Board Sizemm 12202440mm12502500m or upon request Glue WRWBPE0E1E2 Core Poplarhardwoodeucalyptuscombi Thicknessmm 1525mm or as your requested Thickness Tolerance 02mm thickness6mm 0305mm thickness6mm Usage For furniturepackingdecoration Moisture 14 Certification CE SGS Carb FSC ISO9001 Packing details Inner PackingPallet is wrapped with the 020mm plastic bag Outer Packingpallets are covered with plywood or carton boxes and strong steel Loading Quantity 120GP 8pallets22CBM 140GP 16pallets45CBM 140HQ 18pallets53CBM MOQ 120GP
OSB is widely used as a structural wood panel for floors (including subfloors and underlays), walls and ceilings. It is used for interior fittings, furniture, shuttering and packaging and also in the manufacture of I-joists, where it forms the web or support between two flanges of solid wood.
MDF Board ***** Flatt and Smooth surfaces by well sanded ***** made from Mix hardwood Fiber *** High Density vary from 760kg - 820kg /m3 depend on thickness *** All sizes available by demand *** Price depend on sizes starting from usd 6.40 / pc (FOB) ***** usage : Housing components - Furniture components - Carving purposes **** MOQ 48 cbm in 40ft *** Payment term only by 30% Deposit and 70% balance against copy of B/L after shipment released **** Or Special Payment term to check quality : 50% Deposit Bank TT in advance and 50% Balance after received cargo and inspect the quality ***** No L/C accepted due to high Banking fee & Complicated procedures
Chinese mdf bulk order, white spirit, turkish marble, ceramic tiles high grade from india..
Finger-joints are used to join short pieces of wood together to form pieces of greater length. The joint is composed of several meshing wedges or fingers of wood in two adjacent pieces and is held together with structural adhesives.
