Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma analogue voltage 0-5v on/off signal trigger output for multi-sensor application pulse width serial ttl serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install rugged design for use in dusty and humid conditions suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured not just its presence but gives directly 4-20ma serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light object color or any other optical characteristic. Works with hard materials like metal sheet plywood or soft materials like cloth and paper rubber etc.
Optical, Ultrasonic, Conductive, Fibre, Float, Inductive, Magnetic, Capacitive, Laser, Loop Detectors, HMD, Light Curtain, Sensor Inductive Sensor / Capacitive Sensor Proximity Sensor, Photoelectric Sensor, Level Sensor, Ultrasonic Sensor, Wind Sensor, Motion Sensor, Magnetic and Light Curtains, etc
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights Sensitivity Adjustable: Turn on Lights during Day or nights
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights Sensitivity Adjustable: Turn on Lights during Day or nights
Turn on the lights during the day or night Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights Sensitivity adjustable: Turn on lights during day or nights It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
Lux: turn on the lights during the day or night Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights Sensitivity adjustable: Turn on lights during day or nights It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and all other appliance A good solution for energy-saving and easy to install. Delay adjustment: 10 Seconds - 7 Minutes and Adjustable
Prices Mentioned above is for base model only
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
OUTPUT : 4-20 MA SUPPLY : 24 VDC TYPE :2 WIRE PRESSURE TRANSMITTER CAPSULE TYPE PROTECTION CLASS : IP 65 PROCESS CONNECTION : 1/2 " BSP;1/2"NPT ;1/4"BSP;1/4"NPT FIXED RANGE CAPSULE TYPE
Manufacturer:panasonic Product category:board mount motion & position sensors Rohs:rohs compliant Product:motion sensor Sensing distance:12 m Output type:digital Operating supply current:170 ua Package / case:to-5 Maximum operating temperature:+ 60 c Packaging:bulk Supply voltage - max:6 v Supply voltage - min:3 v Brand:panasonic industrial devices Features:enclosed sensing circuits, high s/n ratio Minimum operating temperature:- 20 c Series:ekmc Factory pack quantity:50 Tradename:papirss
Based on the rugged HUMIREL humidity sensor, GP3515 is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is required. Direct interface with a micro-controller is made possible with the moduleâ??s humidity linear voltage and direct NTC outputs. GP3515 is designed for high volume and demanding applications. Main features Tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2 (0.5%), H 2 S (0.5%), O 3 , NOx, NO, CO, Softener, acids (H 2 SO 4 , HNO 3 , HCl), HMDS, Insecticide, Cigarette smoke . Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS Reliability not affected by repeated condensations Full interchangeability. Better than +/-3%RH and +/-0.15°C Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5 V DC supply Humidity calibrated within +/- 3% RH @ 55% RH Temperature measurement through NTC 10 kΩ +/- 1% direct output Ratiometric to voltage supply within the specified range Resistance to chemical and physical stresses · GP3515 has circuit to protect against Electrostatic discharges upto 15 KV air discharge. · GP3515 is protected against reverse polarity · GP3515 is not light sensitive · Additional tests under harsh chemical conditions demonstrate good operation in presence of salt atmosphere, SO 2, O 3, NO, CO,CO2, Softener, Soap, acids. -
1. General Our humidity and temperature sensor module is designed base capacitive humidity and temperature sensor by GP Systems. This product utilizes humidity sensor capacitor (HS1101, France Humirel) with optional temperature sensor Pt100 , with characteristics of stable, high accuracy, quick response, good crossing-over and it also use craftwork of SMD, and so own extremely small body, stable and reliably performance. The quality guarantee time is 12 months. 2. Application Electron , pharmaceutical industry, food processing, warehouses, telecom industry, AHUâ??s, Humidity chambers etc. 3. Shape Module (GP15AP) encapsulation shape: With or without shell detail to the picture 4. Specifications: a) Power Supply: 5 V DC b)Electric Current : 2 mA ( Max. 5 mA) c) Temperature operating range: 0-90 0 C d) Humidity operating range: 0-100% Rh (Dew point) e) Humidity measurement range: 2- 99%Rh f) Temperature storing range: -20 to 85 0 C g) Humidity storage range: Under 95% Rh ( Below dew point) h) Accuracy: 2% Rh (At25 0 C and 60%Rh) -
We are distributor of Sick all types of sensors. eg. Proximity / photoelectric/ distance/ color/array/Vision 2D/3D and much more.
There are two sensors that each landing gear that play the main role, namely the lock-up sensor and the drop-down sensor, which are used to switch on the transmission position signal when the lock-up and lock-down are completed in the landing at take-off phase.
This "Solar Sensor Wall Light" has an intelligent energy saving mode which charges the solar light under both strong sunlight and dim sunlight. This is best suited for lighting up dark or sensitive areas around the house. This solar light is made of high-quality PVC plastic which makes it durable against sunshine, rain, snow, ice, and wind. This solar light is waterproof and heatproof. These solar light can be placed in your garden, yard, aisle or driveway. This lantern emits a white bright light. It's lightweight and portability makes it perfect for your camping and trekking. The built-in solar panel charges the battery to provide 8-10 hours of light. The solar panel needs only 6-8 hours of charging for a full charge. The installation of this solar light is easy and requires no extra equipment. You just need to screw it to hold it against any surface or wall. This "Solar Sensor Wall Light" is equipped with Day/Light sensor, When there is Sunlight available the solar light will charge itself and when it becomes dark, the solar light turns itself On and provide a bright white light of 20 LED lights. Besides the solar sensor, this solar light has motion sensor inside it which runs on infrared. When you move away from the solar light it will automatically shut down and when you go near to the solar light, it will automatically turn on. SKU YN2092 Weight 150 Grams Height 12 cm Width 5 cm Length 9 cm Watt 5 Watts Material Plastic In Pack 1 Solar Sensor Wall Light
Light turns on in the dark and turn off on daytime, intelligent sensor, no need to operate by manual Fully Automatic Switching On And Off Operation. Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights. If you have any queries feel free to contact us. Quick Sense Innovations Official site. packing is tested before dispatched so that the item reaches the buyer safely and undamaged. Working: As shown in the above diagram out of three wire's Red: Load, Blue: Neutral & Brown: Phase. Connect Red & Blue to Load Application were using (i.e. Lighting) & Brown and Blue to 230 VAC input supply. Now it is ready to operate Day/Night mode. For testing keep the torch over to the Photocell load will turn ON. Automatic Sensor Light Control Switch/ It can use Street Light, Garden Lights, Incandescent lamps, LED lights. If you have any queries feel free to contact us. Quick sense innovations. Packing is tested before dispatched so that the item reaches the buyer safely and undamaged.
Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack MINI PIR Sensor Switch, Max load: 100 w Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�° Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the â??+(sun)â?? position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions. Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest. It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack MINI PIR Sensor Switch, Max load: 100 w Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�° Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the +(sun) position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions. Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest. It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.
Quick Sense(Qs-WR05): Touch Smart IR Sensor for Auto Lights It is a Touch Sensor. Its ON or OFF is controlled by touch metal. When your hands touch any metal surface connected by the metal ring, it gets detection and turns on the light. The light will be switched off when your hands touch again. Power source: 220-240V/AC Power Frequency: 50/60Hz Install the product on the wall with two enclosed inflated s Connecting the power and the load to the sensor as the connection-wire diagram Switch on the power an
