EDFA Optical Amplifier 1U Rack EDFA is the erbium-doped fiber amplification board. Its main function is to compensate the power of the signal optical in the transmission line, and it can amplify the optical signals of up to 48 channels with 100 GHZs interval) or 96 channels with 50 GHZ s interval) at C band at the same time. It has characters of flat gain, locked gain, low noise index, etc. It's an indispensable and important component for DWDM system, future high speed system and all-optical network long-distance transmission.
EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application. FUNCTIONï¼? C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1565nm Support systems to achieve different cross-section radio repeater transmission HIGHTLIGHT: Wide operating wavelength range:1528nm~1565nm Three Optical Amplifier C-Band applications: Booster , In-line, Pre-amplifier Low noise figure: typical: 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier. A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension. An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link. A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver. Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units . Wide operating wavelength range:1528nm~1565nm Dual amplifier contains two independent gain units Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR
EDFA optical amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). This is a highly integrated EDFA, and the large module supports Dual amplifier with two independent gain units . Wide operating wavelength range:1528nm~1565nm Dual amplifier contains two independent gain units Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR
Single Fiber Bidirectional EDFA Amplifier models include a Red and a blue port designed for single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems. C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1561nm Support systems to achieve different cross-section radio repeater transmission Operating wavelength range: Blue: 1528nm~1543nm Red: 1547nm~1561nm Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Offset the insertion loss introduced by DCM Reduce the additional degradation of system OSNR Flexible insertion of DCMs at different distances Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Single fiber bidirectional EDFA amplifier include an Red and blue port, Red optical amplifier include an blue out port and blue in port, Red optical amplifier Amplify red optical signal, blue out port and blue in port are used to access the amplifier to amplify the blue optical signal. Blue optical amplifier include an red out port and red in port, Blue optical amplifier Amplify blue optical signal, red out port and red in port are used to access the amplifier to amplify the red optical signal, Blue: 1528nm~1543nm. Red: 1547nm~1561nm.
With the application of long-distance systems becoming more and more extensive, our company's self-developed middle stage access (MSA) EDFA, middle stage access (MSA) EDFA can effectively solve the insertion loss caused by DCM and OADM, offset the DCM and OADM bands. The resulting insertion loss reduces the additional degradation of the system OSNR. C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1565nm Support systems to achieve different cross-section radio repeater transmission Wide operating wavelength range:1528nm~1565nm Low noise figure: typ 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Offset the insertion loss introduced by DCM Reduce the additional degradation of system OSNR Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Middle stage access (MSA) EDFA models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility.New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology.
HTF launched SOA series optical amplifier products can be 1290nm ~1320nm wavelength range to achieve amplification. It can be easily used in 100G transmission system, the maximum can support 160G/s rate. SOA optical amplifier can be used for booster amplification, pre-amplification and other occasions. O-band optical signal overall amplification Covering the wavelength range of 1290 ~ 1320nm 100G 1310nm signal amplification Support O-band, 1290 ~ 1320nm band amplification Output power up to 10dBm 100G 1310nm signal amplification Support APC Low noise, high gain One board supports up to 2 channels of signal amplification
EDFA Optical Amplifier module provide multi-function, low noise, Erbium-Doped Fiber Amplifier (EDFA) solutions, The amplifier module can be operated at constant gain (Automatic Gain Control AGC), constant output power (Automatic Power Control, APC). Integrated VOA can be automatically adjusted to achieve smooth gain spectrum. It can amplify the C-Band signal with or w/o middle stage access (MSA), which brings great flexibility for the network application. C-band optical signal overall amplification Covering the wavelength range of 1528 ~ 1565nm Support systems to achieve different cross-section radio repeater transmission Wide operating wavelength range:1528nm~1565nm Three Optical Amplifier C-Band applications: Booster ï??n-line Pre-amplifier Low noise figure: typical: 5dB Excellent gain flatness Multiple operating modes: AGC adjustable Gain APC output is adjustable ACC voltage adjustable Mid-stage access for DCM or OADM Optional OSC channel for remote management MON port, on-line monitoring optical power and OSNR Many model options serve all the traditional amplifier applications in an extended optical link: booster, in-line, and pre-amplifier. A booster amplifier operates at the transmission side of the link. It features high input power, high output power, and medium optical Gain . Boosters are designed to amplify aggregated optical input power for reach extension. An in-line amplifier operates in the middle of an optical link. It features medium to low input power, high output power, high optical Gain , and a low noise figure. In-line amplifiers are designed for optical amplification between two network nodes on the main optical link. A Pre-amplifier operates at the receiving end of an optical link. It features medium to low input power, medium output power, and medium Gain. Pre-amplifiers are designed for optical amplification to compensate for losses in a demultiplexer located near the optical receiver. Some EDFA Models include an additional mid-stage port designed for insertion of a Dispersion Compensation Management (DCM) unit without its inherent insertion loss. The design of these models maximizes the DCM benefits to increase deployment flexibility. New placement options require fewer amplifiers in the link, and they can open the door to applications that were not possible with older technology. Some EDFA Models include a Red and a blue port designed for Single fiber DWDM Solution. The design of these models is used for single-fiber DWDM transmission systems.
The Semiconductor Optical Amplifier Devices at 1310nm and 1550nm are designed by using a high quality angled SOA chip and a TEC which can assure a stable amplified output for a large dynamic input signal. The devices are available in a standard, 14-pin butterfly package at the 1310nm and 1550nm bands. The SOA devices have high optical gain, high saturation output power, low polarization dependent loss, low noise figure and broad wavelength range. We have options of optical isolators for input and/or output side as well as output fibers of SM fibers, PM fibers and other special fibers per customer specifications. The products are Telcordia GR-468 qualified, and in compliance with RoHS requirement.
I.High power optical amplifier - features 1. The olah is a fiber amplifier and power supply integrated in a 1ru&2ru shelf. Multiple output ports can be chose. 2. The olah incorporates electrical control circuitry wit a digital signal Processor and includes photodiodes for monitoring the optical Input and output power through tap couplers. 3. Double cooling system can protect the pump laser to work in a long time. 4. Rj45 and rs 232 port, snmp management system. 5. Good stability, vfd displays the working conditions, good trouble alarm system.
Price Range: UNLOADED : Rs.2050/Piece , LOADED : Rs.5050- Rs.6250 (Based On SC/LC/ST/SM/MM(OM1,OM2,OM3,OM4). Description: UNISOL Fiber rack mount patch panel provide cross-connect and interconnect capabilities for splicing & terminating OFC cables, pigtails in the fiber access network. Features: MS/Aluminum housing with seven Tank process powder coating. Suitable for 19 Rack mount Applications Replaceable panel for SC/ST/LC/FC type couplers. Can manage adapter panel for maximum 48 SC/48 LC in 1U size Capable of storing up to three meters of 900 micron tight buffered fiber cable Allow maximum six cables entry. Patch or fusion splice field termination standard. High impact resistance splice tray & cable spool for fiber & pigtail routing Accessory kit includes mounting ear, cable gland, cable ties and screws.
Wafer forward amplifier modules
1u edfa, external modulation transmitter, raman amplifier, dcm, fbg interogator, DTS, optical source.
Bandwidth: 40-1000mhz Ctb: 65db Cso: 61db 110 channels flat Vo: 30dbmv. 4pcs per box
The modules are with features of excellent linearity, extremely low noise, very excellent flatness, standard catv outline, rugged construction etc.
Features: 19" standard dimension suitable for all type cabinet Convenient for installation, remove and additio Convenient with sliding rail MPO/MTP trunk lines connecting port is fixed on the back of cassette Transmission for Single MPO/MTP connecter above 40G or 100G High Density:1pc MPO /MTP cassette can reach 24cores High Capacity:1pc MPO/MTP ODF(4U) with 24pcs cassette;Maximum:576cores High Capacity:1pc MPO/MTP ODF(2U) with 12pcs cassette;Maximum:288cores High Capacity:1pc MPO/MTP ODF(1U) with 6pcs cassette;Maximum:144cores Save manpower:No need tidy on site as the ODF assembly
CATV amplifier High-performance 550MHZ, 750MHZ, 860MHZ two-way trunk amplifier High-performance 550MHZ, 750MHZ, 860MHZ two-way collective power supply unit High-performance 750MHZ, 860MHZ, 1000MHZ two-way field trunk feeding splitter High-performance 1000MHZ two-way splitter & distributor sealed with tin High-performance three-net-in-one special customer cover Special optical junction 60V UPS power
Long Pulse Single Frequency PM Fiber Amplifiers for DWDM transmission system We will try our best to provide products similar to keopsys fiber amplifier like CEFA-C-WDM-LP fiber amplifier and CVFA fiber amplifier, NKT Photonics fiber amplifier like X15/E15/C15/Y10 signal-frequency lasers, NP Photonics fiber amplifier like the Rock Fiber Laser Module and the Rock Table- Top Fiber Laser Source, IPG Photonics fiber amplifier like GLR CW green fiber laser, VLM visible fiber laser and Yeetrbium CW fiber laser, and BKtel Photonics fiber amplifier. You probably see us at following exhibitions: SPIE Photonics West in USA, Photonica in Russia, OPTO Taiwan, LASYS in Germany, OPIE in Japan and so on. Parameter unit Specification Min Typ. Max Part No CKLIA-1550-M-SF-LP Center wavelength nm 1540 1550 1565 Peak power W - - 500 Pulse energy uJ 100 Pulse width ns 200 Repetition rate kHz 20 Output average power W 2.0 - - Beam quality M2 1.3 1.5 Output power stability1 ï¼?8hoursï¼? % - 1 2 Output isolation dB 35 - - SMSR dB 20 35 Input signal average power uW 30 100 Power supply VDC 24 Operating temperature -35 - 65 Storage temperature -40 - 85 Output fiber type PLMA-GDF-25/300-M Core NA 0.09 Output fiber length m >0.3 Output fiber connector FC/APC or collimator 3-port circulator On request Dimension mm 300(L)X170(W)X25(H) 1. The output power stability is measured under 25ï¼?30 minutes after warm-up; 2. For more information about integrated 3-Port Optical Circulator, please contact with us
As dynamic strain amplifier, it uses single or SUB rack case, and can be used as multi-channel. It is used for strain gauge applied sensors, and amplification of lvdt and mV output sensor. - Built-in automatic temperature compensating circuit - Easy to adjust zero and span by volume - Built-in single step adjustment function of gain and LPF by rotary switch - Bridge power supply built-out optional switch - One touch auto zero function - Built-in self calibration function.
GA500 mini digital amplifier Introduction C-mark ga500 digital mini amplifier, powered by built-in integrative digital power amplifier, features light weight, high efficiency, best sound, safe protection, incredible compatibility of electromagnetism and open choices of 110vac&220vac power supply. Features 1. Plug & play, user-friendly, clear indication, easy manipulating for nonprofessionals. 2. The digital power amplifier features best sound, high efficiency and high reliability. 3. Complete protection from short circuit, over surge current, over heat, over voltage, power limiting, over temperature frees users from worry of malfunction. 4. The amplifier can be configured three output modes, stereo, mono and bridged. Signal input/output adopts ª)6.35 stereo interface for balance signal transmission. 5. Suitable for many applications like commercial, company, entertainment, school and army etc. Specifications Output power 8ª+: 300w x 2 (1khz) 4ª+: 600w x 2 (1khz) Bridged 8ª+: 1000w (1khz) Free power combination from 1pcs to 7pcs in a standard rack as you like, if 7 pcs combined, max power can reach 8ª+ 300w x 14=4200w;4ª+ 600w x 14=8400w;8ª+ bridged 1000w x 7 =7000w channel. Input sensitivity: 0db Input impedance : 20kª+ú¿ balance ú¬ 10kª+ú¿ unbalance ú¬ Frequency response : >20í½20khz @8ª+ Thd+n: 0.01% ú¿1khz, 1wú¬ S/n: 110dbú¿ a weighted ú¬ Power supply : ac110v/220vú¿ two kinds power supply ú¬ Fuse cube current : 20aú¿ac110vú¬ 10aú¿220vú¬ Net weight : 3kg Gross weight : 3.5kg Net dimension ú¿l*w*hú¬: 387 *155 * 57 mm
