Our Eddy Current Separators are prominently used in industries as a separator of nonferrous metals from mixed wastes and other mainstream materials More specifically it purely separates metals like aluminium copper brass and much more from the product stream municipal solid waste recycling lines scrap residues and other project lines Our eddy masterclass eccentric rotor is designed to ensure the full efficiency of eddy current effects on the rotor shell which separates about 97 of the total nonferrous impurities Application Wise Capacity Applications Capacity Per Meter Width Pet Flakes 1600kg Glass Cullet 10 TonsHR Wood Chip 5 TonsHR Beverage Cains 3 TonHR Rubber Scrap 800 KGHR Aluminium Scrap 2 TonsHR Salient Features Tensile structure with a very stable foundation Zero loss of valuable material Low on maintenance Quality deliverance and protection for further equipment High yields of nonferrous metals recovery Applications 98 recovery of aluminium cans from commingled recyclables Stainless steel copper aluminium and brass from shredder residue and fluff Nonferrous metal recovery in refuse streams and ash streams in WastetoEnergy facilities Separation of nonferrous chips Aluminium scrap recovery in foundry sand reclamation Glass cullet recycling Wood waste processing Aluminium extrusion recycling Eddy Current Separator is used for Aluminium Scrap Recycling Rubber Scrap Recycling Ewaste Recycling MSW Municipal Solid Waste Glass Cullet Recycling Aluminium Scrap Recycling Pet Flakes Recycling Wire Scrap Recycling Plastic Waste Recycling PVC Scrap Recycling Zorba
Eddy current separator/non-ferrous metal separator Eddy current separator makes use of induced current generated by conductor in the high frequency alternating magnetic field. During operation, there is high frequency alternating magnetic field in the surface of the in the surface of separation magnetic rollers.When non-ferrous metals pass through the magnetic field , eddy current will be appeared in the non-ferrous metal, it will produce the magnetic field opposite to the origin, non-ferrous metal (such as copper, aluminum, etc.) leap forward along the transport direction, because of the the repulsion of the magnetic field. Realizing the separation with other nonconductive materials or other separation of or nonmetal materials. Characteristics: 1?it’s convenient to install and use with high separation efficiency 2?adopting the high strength permanent magnet as the source of magnetic with steady and long be sustainable 3?without electricity, energy saving. 4?structure is reasonable and reliable, easy to maintenance. 5?repulsive force is strong and can be adjusted with strong adaptability 6?it has large range of separating particle size, is suitable for the non-magnetic and non-ferrous metals , whose granularity is more than 1.5mm. Application scope: It is mainly used for household waste, industrial waste, industrial waste slag, electronic appliances waste, glass broken materials, boiler ashes, scrap car slice, such as copper, aluminum, tin, lead, stainless steel and other kinds of weak magnetic conductor materials, non-magnetic conductor materials, non-ferrous metals and other materials in the industry of non-ferrous metals processing. Eddy current separator/non-ferrous metal separator
Eddy current separator is mainly used to recycle copper, aluminum and other non-ferrous metals from industrial waste and solid waste. It is widely used in environmental protection industries, like waste classification, waste electrical and electronic equipments recycle, and the treatment of non-ferrous metal industrial materials. The separation efficiency is good for a wide range of non-ferrous metals, which features strong adaptability, and reliable mechanical structure, high efficiency in separation. Standard features and benefits : 1. Ndfeb permanent magnet , powerful magnetic field. 2. Reasonanle structure, convenient installation, easy operation and maintenace. 3. Import main parts to insure stable and reliable performance: nord gear motor, nsk bearing, seigling belt, schneider electric parts. 4. Safety protective facilities.
Vegetable eddy current cleaning machine different capacity ,welcome order !
Ejet magnetic equipment magnetic pulleys would supply you more magnets of what you want for greater attracting power and holding power, keeping harmful, dangerous ferrous particles out of your processing system or redeem valuable ferrites from other substances. Application: Waste recovery Mining Recycling applications Cement Coal handling plant Refractory Minerals
Hmds wet magnetic drum separator is widely used in coal mine processing. With the development and expansion of heavy media processing technique, drum separator for heavy media processing is widely used in coal-washing plant. The structure of coal mine used drum separator has never had big change, while with the application of new magnetic material, magnet developed from simplex ferrite, mixed magnet to rare earth super strength magnet. Magnetic intensity was raised greatly, improving the recovery percent and lowering media consuming effectively. Features: 1. Important role in coal mine recycling 2. High minmal permanent magnet 3.Keep magnetism for long time 4.Duble stainess steel structure of the pullyer 5.High recycling rate Heavy media content rcycling rate 87-130kg/m3 >99.7% 130-260kg/m3 >99.8% >260kg/m3 >99.9%
Eddy current separator, magnetic separator, drum magnetic separator, magnetics pulley.
1. Current overload or line surge shutdown 2. High temperature compressor shutdown. 3. High pressure alarm shutdown. 4. Low pressure alarm shutdown. 5. Low oxygen cocentrator alarm. Oxygen concentrator: 0.5-5L/min Purity: 95%+_3% Working system Continuous Power Supply AC230V.50Hz/AC220V.60HZ AC120V.60Hz Power: 390VA Net Weight: 16kg( Gross weight: 18.5kgs) Warranty: Long-life compressor designed for 1000 hours of maintenance-free use. Size: 33*26*54cm
Senna Plant Benefits For Health: As stated above, senna possesses medicinal value which can provide various health benefits given below. 1. Senna For Constipation: Being a laxative, senna is effective in relieving constipation. It has been approved by the US FDA as a non prescription drug to treat constipation. Senna stimulates the muscles of the colon to push fecal matter through more quickly. Senna leaf acts on the intestinal walls to cause contractions that lead to bowel movements. It softens stool by enabling the colon to absorb water. It can effectively cure even the most severe cases of constipation. The glycosides in it help transport electrolytes, causing bowel movements within 6 to 12 hours of its intake. Senna can be bought as an over the counter (OTC) medication for adults and children above 2 years of age. 2. Great Colon Cleanser: Senna has been regarded as a â??cleansing herbâ?? due to its laxative effects. Senna leaf is used in traditional Chinese medicine to clear away the heat accumulated in the large intestine, helping the body get rid of the stagnant food accumulated in the stomach. Today, it is widely used in cleansing the colon before colonoscopy and other types of colon surgery. 3. Treatment of Hemorrhoids: Senna has been found to be effective in the treatment of anal lacerations and hemorrhoids as it helps reduce swelling and facilitates quick healing. Moreover, since it promotes soft stools, it helps cause easy defecation in pathological conditions like anal fissure. This is due to the fact that after oral ingestion, the compounds in senna get absorbed into the intestinal tract, resulting in the separation of non-sugar parts in the colon. These non-sugar components increase the peristaltic movements by irritating and stimulating the intestinal tract. In this way, it speeds up the passage of stools through the intestinal tract. 4. Treatment of Intestinal Worms: The laxative properties of senna have been found to be useful in the treatment of worms in the stomach and colon.  Senna Medicinal Plant: Nutritional Value: The nutritional value of this herb has been explained in the table below. As evident from the table, it is devoid of calories and fat but a rich source of vitamin B
Lifting magnet, magnetic separator, eddy current separator, wet/dry magnetic drum, lifter, magnetic chuck.
Brief introduction Copper wire granulator is widely used to crush and separate car cables, communication cables and other copper wires with diameter between 0.02-40mm. after crushing and separating copper can be completely separated from plastic. Copper purity: 99.9% e m a i l bnjx1 at baonanjx dot com Raw materials for processing: 1. All kinds of Copper cable and wire; 2. Aluminum cable and wire; 3. Auto wiring harnesses; 4. Communication cables; 5. Household electric wire; 6. Computer wire; 7. Other unclassified cables which cannot be processed by wire-stripping machine. Features ïPLC control cabinet guarantee the processing safety and protect the machine life ï integrated structure, easy to install and debug, convenient to transport, stable performance. ïBlade and screen use special wear resistance and high toughness alloy material to reduce the production cost. ïdouble roller, low speed to guarantee the feeding efficiency ïNo dust, no secondary pollution ïCopper purity 99.9% ïPulse dust collector
Brief introduction Copper wire granulator is widely used to crush and separate car cables, communication cables and other copper wires with diameter between 0.02-40mm. e m a i l bnjx1 at baonanjx dot com Copper purity: 99.9% Raw materials for processing: 1. All kinds of Copper cable and wire; 2. Aluminum cable and wire; 3. Auto wiring harnesses; 4. Communication cables; 5. Household electric wire; 6. Computer wire; 7. Other unclassified cables which cannot be processed by wire-stripping machine.
Copper wire recycling machine, wire shredder, metal shredder, eddy current separator, meta shear, municipal solid waste sorting line.Shipping
Shaft (shear) shredder, eddy current separator, universal tilting rotary furnace, ingot casting machine, robotic ingot palletizer, dryer, silo discharger.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Egg white and yolk separator machine 1000pcs/hour for single row , 2000-4000pcs/hour for 2-row ,big capacity egg yolk and white production line by customized ,welcome order!
