Nacelle adopt aluminum alloy compression molding, light in weight; Silicon steel sheet: using model 600 cold rolling silicon steel sheet, difficult to be heated; Rotor: material of the magnet is ndfeb( h grade), high efficiency and thermostability; Tail: molding by fiber glass mat, good suppleness and high intensity. Wood box
Small wind turbine generator. Accumulators full charge time: about 8 hours > Mast height/weight: 9m - optional /150kg > Weight: 300kgs (without mast).
Basic Parameters Rated Power(kw) 60 Survival Wind Speed(m/s) 45 Max Power(kw) 65 Working Wind Speed(m/s) 1-25 Rated Voltage(v) 420/600 Rated Wind Speed(m/s) 10 Rated Rotation(r/min) 100 Blade Length(m) 8.6 Cut-in Wind Speed(m/s) 1 Blade Material FRP Cut-out Wind Speed(m/s) 25 Generator Life(year) 20 Some Key Technology Control Method Adjust Speed Method centrifuge variable pitch Brake Method electromagnetic Generator Generator Configuration 3-phase 380/220v 50/60hz Generation Type 3-phase permanent magnet Protect Class IP54
Rotor diameter: 18.0m Blades quantity: 3pcs Direction: always upwind Blades material: Carbon fiber reinforced plastic Rated output: 50KW Power supplied to Grid 60KW [in 5seconds] working voltage: DC500-800V,AC380-400V Annual average energy production: 110MWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 3.0m/s Nominal wind speed: 10.0m/sï¼?33.6mphï¼? Storm-stand: up to 55m/s Max rotate speed: 60r/min Wind turbine type: PM 40 poles synchronous generator, Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch setting Over-speed Protection -Aerodynamic braking system+ -hydraulic rotor brake Speed Regulate and Shut Down Methods -Electro-Yawing, Positive Pitch and -Electric Magnet dumping brake Gearbox: None, Direct Drive Hub height (m) 18-20-24-35 (free-standing or hydraulic tower)
Rotor diameter: 12.56m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output: 30KW Power supplied to Grid 32KW [in 5seconds] working voltage: DC500/600V,AC220V/380V Annual average energy production: 70MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.5m/s Nominal wind speed: 12.0m/s Storm-stand: up to 55m/s Max rotate speed: 100r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Electro-Yawing,Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Tower style and height Free-standing tower 15m, 18m up to 35m.
Rotor diameter: 12.35m Blades quantity: 3pcs Direction: always downwind Blades material: Carbon fiber reinforced plastic Rated output Power: 20KW Power supplied to Grid 24KW [in 5seconds] working voltage: DC360V/500V,AC220V/380V Annual average energy production: 50MWH (in rate 5m/s wind speed) working wind speed: 3-35m/s Initial wind speed: 2.0m/s Nominal wind speed: 9.0m/s30.3mph Storm-stand: up to 55m/s Max rotate speed: 120r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Variable Pitch Over-speed Protection Aerodynamic brake + Electromechanical disc brake Speed Regulate and Shut Down Methods Auto-Yawing, Positive Pitch and Electric Magnet Switch. Gearbox: None, Direct Drive Battery charge time: SENWEI-
Rotor diameter: 5.0m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output Power: 5Kw , 5000W Maximum output power: 9500W working voltage: DC48/96/120/240/500V,AC220V/380V Annual average energy production: 11315KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 10.0m/s22.3mph Storm-stand: up to 50m/s Max rotate speed: 240r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch-www.windpowercn.com Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
Rotor diameter: 3.5m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output power: 2000W Maximum output power: 2950W working voltage: DC24/36/48/96/120/240V,AC220V Annual average energy production: 4672KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 8.0m/s17.8mph Storm-stand: up to 50m/s Max rotate speed: 400r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch- Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours
Power: 600w Rotor diameter: 2.5m Blades quantity: 3 pcs Blades material: frp (composite material) Rated speed: 400r/min Rated output power: 600w Max output power: 750w Output voltage: dc24v/ac220v Start wind speed:3m/s Rated wind speed:8m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Speed regulation: yaw& magnetic resistance Charge control: aic (automatic intelligent control) Wind turbine type: pmg (on constant magnets) Working temperature: from -40 to +60 c Annual average energy production: 1500kwh Recommended accumulators: 300ah Accumulators full charge time: about 8 hours Tower type: pull wire tubular tower or standarding alone tower(optinal) Tower height:6m (optional) weight: 40kgs (without tower) Can supply power for: color tv, lighting, electric fan and charger. Packing is by plywood box.
Power: 1KW Rotor diameter: 2.8m Blades quantity: 3 pcs Blades material: FRP (composite material) Rated speed: 360r/min Rated output power: 1000W Max output power: 1500W Output voltage: DC48V/AC220V Start wind speed:3m/s Rated wind speed:8m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Speed regulation: yaw& magnetic resistance Charge control: AIC (automatic intelligent control) Windturbinetype: PMG (onconstantmagnets) Working temperature: from -40 to +60 C Annual average energy production: 2500kWh Recommended accumulators: 600Ah Accumulators full charge time: about 8 hours Tower type: pull wire tubular tower or cone tower(optinal) Tower height:6m (optional) Weight: 45kgs (without tower) Can Supply Power For: water pump, TV, Washer, Illumine, Fanner, Charge. Packing is by plywood box.
Main Parameter: Model: TR10.0-20KW Rated Power: 20KW Max Power: 25KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 360V Start Wind Speed: 2m/s Rated Wind Speed: 12m/s Maximum Wind Speed: 45m/s Rotor Diameter: 10.0m Rated Rotor Speed: 90r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 18m or higher
Main Parameter: Model: TR8.0-10KW Rated Power: 10KW Max Power: 12KW Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 8.0m Rated Rotor Speed: 180r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR6.4-5000W Rated Power: 5000W Max Power: 6000W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 240V Start Wind Speed: 2m/s Rated Wind Speed: 10m/s Maximum Wind Speed: 45m/s Rotor Diameter: 6.4m Rated Rotor Speed: 200r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 12m,18m or higher
Main Parameter: Model: TR3.2-1000W Rated Power: 1000W Max Power: 1500W Generator: Three Phase Permanent Magnet Alternator Rated Output Voltage: 48V Start Wind Speed: 2m/s Rated Wind Speed: 8m/s Maximum Wind Speed: 35m/s Rotor Diameter: 3.2m Rated Rotor Speed: 400r/m Blade Number: 3 Blade Material: Reinforced fiber glass Blade Pitch Control: None, Fixed Pitch Overspend Protection: Auto programmed control Gearbox: None, Direct Drive Temperature Range: -40 to +70 Deg. C Tower Type: Wire Guyed or Free Standing Tower Height: 6m ,9m or 12m
Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines.
Rotation speed120r/min Blade materialFiberglass Number of blades3 pieces Turbine weight75kg Package size (m)2.0*1.2*1.2 PackingPlyboard and steel tubes Tower height 6m Tower type Steel (q235b) Plyboard and square steel tube material package, 2.0m x 1.2m x 1.2m
Focus-6100 butyl tapes are mainly made of butyl rubber with excellent performance in waterproofing and sealing. Main Specification (Customized size is acceptable.) 3.0mm thickness * 12mm width *15m roll length 2.5mm thickness * 8mm width * 15m roll length 2 mm thickness * 15mm width * 20m roll length 2.5 mm thickness * 8mm width * 20m roll length Main Color black, grey, white Technical Data Product Series FOCUS-6100 Application Composite Materials Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 220KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet. Advantages Strong adhesion. Wide application temperature range. Excellent performance in waterproofing and sealing. Applications * During the production of vacuum extraction process for wind mill blade, it has excellent sealing property between vacuum bags and molds. During the production of vacuum extraction processfor fiberglass, it has excellent sealing property between vacuum bags and molds. * During the production of vacuum extraction process for cabin cover, it has excellent sealing property between vacuum bags and molds. * As auxiliary materials, our Focus-6100 series are widely used in the production of wind mill blade, fiberglass, cabin cover, car tail bracket, automotive engine cover, yacht. * Our products have excellent sealing property between vacuum bags and mold during the vacuum extraction process.
Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal . Wooden case.
Wind turbine generator we provide wind turbine generator with capacity rom 600kw- 2mw with German or international standard quality. The quotation is of competitiveness with satisfied quality. S43/600KW Wind Generator Sets Main parameters: installed elec. output 600KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s/operating temperature -30fpC-45fpC/total weight 65000kg (Rotor :rotor diameter 43m/s wept area 1452m2/number of blades 3/rotational speed 26.8or17.9 rpm/power regulation, stall (Blade:designation,LM19.1/FD43-600 made in China/aerodynamic profile FFA W3 NACA 634/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 1960kg (Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:56.6/Rated power 645KW/efficiency 0.97/rated torque 230KN.m (Generator: rated output 600or 125KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1517or1013rpm (Tower: height 38.5or48.5m/weight 33000 or45800kg (Yaw system :type, active/yaw rate 0.2 S48/750KW Wind Generator Sets Main parameters: installed elec. output 750KW/cut-in wind speed 3.2m/s/rated wind speed 15m/s/cut-out wind speed 24m/s/survival wind speed 70m/s (Rotor: rotor diameter 48.4m/swept area 1840m2/number of blades 3/rotational speed 22.3or14.9 rpm/power regulation, stall (Blade:designation,LM23.2/aerodynamic profile, NACA 63xx-634xx/blade material, fiberglass reinforced polyester/aerodynamic brakes, turning blade tip/weight 3050kg f(Gear box:type,1-stage planetary,2-stage parallel axles/ratio 1:68.2/efficiency fª0.97 (Generator: rated output 750or 185KW/number of poles 4or6/rated voltage 690V/rated current 560or126A/frequency 50Hz/rated speed 1520or1013rpm (Tower: height 65m/weight 75000kg different dimensions
Main Parameter: Rotor diameter: 5.0m Blades quantity: 3pcs Direction: always upwind Blades material: Glass fiber reinforced plastic Rated output power: 3Kw, 3000W Maximum output power: 5400W working voltage: DC24/36/48/96/120/240V,AC220V Annual average energy production: 6570KWH (in rate 5m/s wind speed) working wind speed: 3-25m/s Initial wind speed: 2.5m/s Nominal wind speed: 10.0m/s22.3mph Storm-stand: up to 50m/s Max rotate speed: 240r/min Wind turbine type: Three-phase, PMG Alternator Working temperature: from -40 to +60 C Blade Pitch Control Fixed Pitch Over Speed Protection Auto-furl Speed regulation methods: Yawing and electrical magnet switch Stop Methods Manual Brake + Hydraulic Brake Gearbox: None, Direct Drive Batttery full charge time: about 8 hours Power Curve
