Standards ASTM / ASME A240 / SA240 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
Standards ASTM A479 / ASME SA479 Fasteners size Bolt / Screw Size : M3 M56 | 3/6 to 2 | Custom Sizes. Nuts Size : M3 M56 | 3/6 to 2| Custom Sizes. Washers Size : M3 M56 | 3/6 to 2 | Custom Sizes. Machine Screws Size : M1.6 M12. Self Tapping Screw Size : No.2 No. 14. Length 3 mm to 200 mm Threads Configuration ASME B1.1 2A/3A 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads Certification Dual Certified As per ASTM & ASME Codes Fasteners Type Nut, Hex Coupling Nut, Hex Nut, Square Nut, Hex Domed Cap Nuts, Hex Head Bolts, Stud Bolts, Socket Hexagon Head Screw, Pan Head Screw, Socket Head Cap Screw, Wing Screw, T-Head Bolts, Foundation Bolts,Screw, Studs, Socket Screw, Hex Set Screw, Cap Screw, Machine Screw, Wing Screw, Spring Washers, Washers, Studs, Marine Anchors, Anchors, Hexagon Nut,U- Bolts, Anchor Bolt, Mushroom Head Square Neck Bolts, J Bolts,Eye Bolt,Structural Bolts, Bolts, Nuts, Sockets, Screws, Allen Cap screw
Standard ASTM A479 / ASME SA479 Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI Round Bars Outside Diameter in the range of 4mm to 500mm Bright Bars Outside Diameter in the range of 4mm to 100mm Hex Bars 18mm - 57mm (11/16 to 2-3/4) Square Bars 18mm - 47mm (11/16 to 1-3/4) Flat Bars 1/2 to 10 in thickness range of 2mm to 150mm Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish Length 1 to 6 Meters, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Standard ASTM A479 / ASME SA479 Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI Round Bars Outside Diameter in the range of 4mm to 500mm Bright Bars Outside Diameter in the range of 4mm to 100mm Hex Bars 18mm â?? 57mm (11/16â?³ to 2-3/4â?³) Square Bars 18mm â?? 47mm (11/16â?³ to 1-3/4â?³) Flat Bars 1/2â?? to 10â?? in thickness range of 2mm to 150mm Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish Length 1 to 6 Meters, Custom Cut Lengths Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Standards ASTM / ASME A240 / SA240 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
Standards ASTM / ASME A240 / SA240 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
Standards ASTM ASME A790 A928 A789 SA790 SA928 SA789 Outer Diameter 600 mm OD up to 9144 mm OD Sizes up to 24 NB Thickness 03mm 50 mm Type Seamless ERW EFW Welded Fabricated LSAW Pipes Schedule SCH20 SCH30 SCH40 STD SCH80 XS SCH60 SCH80 SCH120 SCH140 SCH160 XXS Seamless Pipes amp Tubes Size 1 8 NB 24 NB ERW Pipes amp Tubes Size 1 8 NB 36 NB EFW Pipes amp Tubes Size 6 NB 100 NB Length Single Random Double Random amp Required Length Form Round PipesTubes Square PipesTubes Rectangular PipeTubes Coiled Tubes U Shape Pan Cake Coils Hydraulic Tubes End Plain End Beveled End Treaded
Standards ASTM / ASME A790, A928, A789 / SA790, SA928, SA789 Outer Diameter 6.00 mm OD up to 914.4 mm OD, Sizes up to 24â?? NB Thickness 0.3mm â?? 50 mm Type Seamless / ERW / EFW / Welded / Fabricated / LSAW Pipes Schedule SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS Seamless Pipes & Tubes Size 1 / 8â?³ NB â?? 24â?³ NB ERW Pipes & Tubes Size 1 / 8â?³ NB â?? 36â?³ NB EFW Pipes & Tubes Size 6â?³ NB â?? 100â?³ NB Length Single Random, Double Random & Required Length Form Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, â??Uâ?? Shape, Pan Cake Coils, Hydraulic Tubes End Plain End, Beveled End, Treaded
Duplex Board Grey Back, White Back & Kraft Back from 200 to 600 gsm Duplex Board Grey Back, White Back & Kraft Back from 200 to 600 gsm a kind of paperboard or cardboard, also named greyboard, due to its double side grey color. It consists of two layers, or plies, so people call it duplex board. The exterior one side of the board often is coated with a bright white appearance to give it a glossy sheen. Coated duplex board one side with a glossy coated surface suit for superior printability. The paperboard thickness description always is millimeter, or by gsm (grams per square meter). 1.5MM=900gsm, 2MM=1200gsm, 3MM=1800gsm The advantage of the duplex board is rigid, durable, straight. In Box Packaging Solution team, usually, we use it to make luxury rigid gift boxes, like rigid shoe boxes, garment boxes, and toys packing. Because of the outstanding paper stiffness, which is strong support for the box die-cutting process, and laminating hot stamping results. Also, it could be used for making containers to pack wine and liquor packaging. The uncoated duplex board always be wrapped with art paper and specialty paper to build rigid boxes with fantastic artwork printing. Duplex paperboard is made from 100% recycled paper material, eco-friendly. In the food industry, due to hygiene reasons, the ordinary duplex cardboard is not made from recycled paper; however, sometimes waste paper is used if the paperboard is designated for other purposes.
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
- Material : Solid SS304, SS316, SS316L ( also available in some models with hollow tube) - Shape at top of the spigot: Round/dome top or slopped as shown in the picture) - Also available in Square shape - Spigot no hole in the glass panel. - Spigot with base plate and cover ring - Dimensions: 48 x 155mm, 48*220mm, 48*300mm with base plate. - include the black gasket and stainless steel insert - Mirror polished or satin stainless steel.
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Product name: Wheat bran plates Material: Wheat bran Usage: Decor home, restaurant, gift, Price: contact us for the best price Color: as the picture or Customized Technique: Painted Delivery time: 5-10 days according to customer's exact order Trade Terms: FOB HCM Port : Vietnam Payment Terms: T/T 30% deposit, balance against TT or L/C at sight, irrevocable
Duplex Stainless SteelDuplex Steel Sheets & Plates Supplier & Exporter in India. HEUBACH INTERNATIONAL is one of the prime supplier, stockist, exporter and trader of Duplex Steel Sheets and Plates in Mumbai, India. Engaged as a supplier and exporter, we are captivated in providing finest quality of Duplex Steel Sheets, which are being made up by using high-grade of stainless steel. Beside from this, these Duplex Steel Plates can be tailored as per the requirements of our customers for to gain their maximum satisfaction. Meanwhile, these sheets and plates has some of the best features like available in quite reasonable prices, are accurately designed, and has longer service of life. Ensuring to give high quality of materials, these can further be custom-made in terms of sizes, shapes and thicknesses as per the precise needs of our venerated patrons. Duplex Sheets, Duplex Steel Sheets & Plates, Duplex Steel UNS S31803, S32205 Plates, Duplex Steel Perforated Sheet, Duplex Chequered Plate Stockist & Trader in India. Duplex Steel Sheets & Plates Specification: Grade :UNS S31803, S32205 Standard :ASTM A240 / ASME SA240 Size :1250mm x 2500mm, 1500mm x 3000mm, 2000mm x 6000mm Length :4.0mm â?? 100mm Hardness :Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. Finish :Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) Form :Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Our Plates, sheets and coils are made of Stainless Steel, Nickel Alloys, Carbon Steel, Alloy Steel, and Other Ferrous & Non-Ferrous Metals. They are used in a range of applications like structural and mechanical & general engineering purposes. They are designed to withstand tremendous amount of weights and pressure. Our plates, sheets and coils are testimonials of our quality standards. Our comprehensive range includes alloy steel coil, carbon steel coil and many more. The standard sizes range from 0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75. Range :0.5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length available with NACE MR 01-75.Ã? Range : 0.5 mm To 150 mm thick in 1000 mm TO 2000 mm width & 2500 mm to 6000 mm Length available with NACE MR 01-75. Type : Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc. Form : Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate. Finish : Ã?» 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) H, 904L. Ã?» Hot rolled plate (HR), Ã?» Cold rolled sheet (CR) Stainless Steel Plate : Stainless Steel Plate And SheetsASTM / ASME SA 240 GR. TP 304 , 304L , 304H, 309S , 309H , 310S, 310H , 316 , 316L, 316H , 316Ti , 317L , 321 , 321H , 347 , 347 H , 409, 410S, 420, 430, 904L Value Added ServicesÃ?» Cutting Ã?» Bending Ã?» Forging Ã?» Rolling Ã?» Heat Treatment Ã?» Minor Fabrication Test Certificate : Mill Test Certificate as per EN 10204 / 3.1BÃ?Â
All types of reinforced steel bars (tmt bars), hot rolled & cold rolled coils, cs plates, ss plates, channels, angles, beams, pipes, structural steel, chequered plates, and metal scraps..Trader, exporter & importer
Pure leaf plates pure and natural What is the use of leaf plate? Image result for siali leaf plates MERITS The leaves and leaf plates are used for offering naivedyam to god during worship and distribution of prasadam to devotees. They are extensively used for serving food during marriages, religious festivals, community feasts, etc