DESCRIPTION DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21. FEATURES 1.Customized meter design for Finland Utility. 2.Special terminal block connection for easy wiring. 3.Terminal cover &front cover with detecting features. 4.With backup battery for RTC. 5.Load Profile(Optional) 6.MD measurement 7.Over-load protection: Automatic power-off as load exceeds the specified value(optional) 8.With optical communication port(IEC1107) 9.Open protocol: DLMS/COSEM(Optional)
DESCRIPTION DTSD1088 three phase multifunctional meter is made to accurately measures total active/reactive energy, forward and reverse active/reactive energy and maximum demand. And in real-time it also measures and takes in process parameters like active/reactive power, apparent power, voltage, current, power factor, frequency and so on, and implements time-of-use control, automatic storage of reading-day demand, and records of load profile and events. With infrared, RS485, PLC and GPRS communication equipped, DTSD1088 meter realizes time of use energy measurement and efficient processing in ease. It complies with applicable standards of IEC62052-11, IEC62053-21, IEC62053-23, IEC62053-661, IEC62054-21, IEC62056-61, IEC62059-11 and IEC62059-21. FEATURES 1.Functional LCD displays(menu driven, scrolling function, IR remote control mode) 2.Events record: Power-on/power-off (latest ten time), power quality monitoring(10 times), meter cover open(10 times recorded and can be read by MDM software). 3.Load curve recording: Active/reactive energy, voltage(3 phases), current(3 phases), power factor(3 phases) and time stamp(DD/MM/HH/YY) 4.External relay 5.Over-load protection: Automatic power-off as load exceeds the specified value(optional) 6.RTC, broadcast time synchronization via communication interface(could be set by GPS time via the MDM) 7.Optional multi-communication: PLC based on OFDM according to CENELEC standards(A-band), GPRS(SIMCOM-chip), RS485, integrated M-Bus(extended connection to gas and water meters) according to OMS standard. 8.Open Protocol: DLMS/COSEM 9.Advanced AMI integration (Optional)
DESCRIPTION Adopting large scale IC and SMT processes,the DTSD1088 DLMS meter is made to accurately total active/reactive energy,forward and reverse active/reative energy and maximum demand.And in real-time it also measures and takes in process parameters like active/reactive power,apparent power,Voltage,current,power factor,frequency and so on,and implements time-of-use control,automatic stroge of reading-day demand,and records load profile and events.And with infrared,RS485,PLC communications equipped,the DTSD1088 DLMS meter is an ideal device to realize time-of use energy measurement and efficient processing in ease.It complies with applicable standards of IEC62052-11,IEC62053-21,IEC62053-61,IEC62054-21,IEC62056-61,IEC62059-11,IEC62059-21. FEATURES 1. Energy measurement (separate and total):Forward and reverse,active,four-quadrant,time-of use,sub-phase. 2. Demand record 3. Real-time parameters 4. Data archive 5. Data freezing 6. Events record 7. Optional infrared,PLC,M-BUS,Ethernet,GPRS communication
DESCRIPTION The DDSY1088 single phase two wire postpaid meter is made of high quality optimized long life components and designed in advanced SMT technique with good performances on reliability, accuracy and load ranges.DDSY1088 provides metering solution benefiting both consumers and power utilities. It complies with the applicable standards of IEC1036, IEC62052-11, IEC62053-21. FEATURES 1. High accuracy measurement with LCD display,5 integers. 2. Wide operating voltage range 0.8Un ~ 1.15Un. 3. Long time precisely works without calibration and limit error linear maintains flat during heavy loading from start to end. 4. With active impulse LED indicator and reverse energy LED indicator 5. With cover of terminal block made by transparent material. 6. Measures active energy,reactive energy and reverse always add to positive. 7. Meter base and cover ultrasonic sealed 8. The communication between meter and CIU is PLC
On grid / Grid-tied Rated power: 5000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 21kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 6000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 21kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 15000W No. of MPPT: 2 Strings per MPPT: 2+1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 24.8kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 12000W No. of MPPT: 2 Strings per MPPT: 2+1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 24.8kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 10000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 23.2kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 8000W No. of MPPT: 2 Strings per MPPT: 1 Phase: Three phase Warranty: 10 years Dimension(W/H/D): 500*428*200mm Net weight: 23.2kgs LED display Protection devices: DC reverse polarity protection, output over current protection, output overvoltage protection-varistor, integrated DC switch, ground fault monitoring, integrated all-pole sensitive leakage current monitoring unit. The solar inverter takes full account of the needs of end customers, it is used to convert the DC generated by photovoltaic panels into AC and send it to the grid in a three-phase manner. With excellent performance at the same time, use LED as inverter status display, effectively improve product life. Using DSP digital control, could afford wide grid voltage range, have a full range of protection features; to maximize the benefits at the same time, greatly enhance the reliability of the product.
On grid / Grid-tied Rated power: 110KW No. of MPPT: 10 Strings per MPPT: 2 Phase: Three phase Dimension(W/H/D): 1050*660*330mm Net weight: 98kgs
Three Phase Energy Meter with following features - Dual Source - Prepaid Function with inbuilt relays - Whole Current - Load Curtailment - Modbus/RS485 Protocol Communication - 10-60 Amps Customization as per requirement also possible
Standards 1, IEC62052-11:2003 2, IEC62053-21:2003 Features 1.Measurment: Measure total active energy and tariffs. 2.Meaure total active max demand and four tariffs total active max demand. 3.multi-tariff function. 4.Record previous 12 months data.
Product description Three-phase electric energy meter calibrator is used for grid corporation of measurement and energy test center, management department of power supply bureau, national energy measurement of testing authorities, and also used to test each kind of single/three-phase kWh meter of industries and mining enterprises as well as electric meter manufacturers. Meanwhile, the calibrator also can be used as one high-precision standard power source. Technical index Electrical parameters Accuracy 0.05%, 0.1% Power Supply One Phase AC 180-265V, frequency 50/60Hz. AC Voltage Output Range(U1,U2,U3) 57.7V, 100V, 220V, 380V or 69.3V, 120V, 240V, 480V( optional) Adjustment range (0-120)%RG(1) Adjustment �neness 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional. Electrical parameters - continued AC Voltage Output - continued Stability 0.01%/120s Distortion 0.3% (Non-capacitive load) Output load each phase 25VA Measuring accuracy 0.05%RG AC Current Output Range(I1,I2,I3) 200mA, 1A, 5A, 20A, 100A Adjustment range (0-120)%RG Adjustment �neness 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional. Stability
PRODUCT INFO Lotus root is an oblong, tubular rhizome or stem that grows underground in bodies of water, averaging 5-10 centimeters in diameter and 10-20 centimeters in length. Appearing like underwater sausage links, the rhizomes are connected to other rhizomes via smaller roots creating groupings of 3 to 5 and can grow to be over one meter in length as a whole. When young, Lotus root has a firm texture with light purple to white skin that transforms into a brown-beige hue with darker brown speckling when mature. Underneath the thin skin, the flesh ranges in color from ivory to white and is crisp, light, and starchy. There are also numerous, symmetrical, air pockets patterned into a pinwheel shape in the flesh that extend the entire length of the rhizome. Lotus root has a dense and crunchy texture with a nutty and sweet flavor, similar to that of a water chestnut or taro root. The younger roots are more tender and used for fresh culinary purposes, whereas mature roots are used in extended cooking applications to develop a tender, potato-like texture. Considered a good source of energy as it is high in carbohydrates. It also contains vitamin C, manganese, zinc, iron, copper, vitamin B, potassium, and magnesium. USES Lotus root is best suited for cooked applications such as steaming, frying, braising, stir-frying, and boiling. After peeling the root, it should be immersed in acidulated water using vinegar or citrus to prevent discoloration. Lotus root can be blanched just slightly to remove any bitterness, cooled, and added to salads or crudite. It can also be sliced and braised until tender in soups, stir-fried, battered and fried into tempura, or thinly sliced and baked into chips. In India, Lotus root is boiled, mashed, and added to vegetarian kofta, which is a dumpling dish paired with spicy sauces. A traditional Korean dessert also utilizes Lotus root with soy sauce, honey, and sesame seeds called yeongun bokkum. Lotus roots pair well with mushrooms, peppers, snap peas, snow peas, asparagus, corn, celery, cucumber, oyster sauce, peanuts, red beans, and sesame seeds. Lotus root will keep up to two weeks when stored whole, wrapped in damp paper towels, and placed in a plastic bag in the refrigerator. Sliced Lotus root can be stored in an acidulated water solution for a couple of days, or it can be frozen for long-term storage. SEASON Lotus root is available year-round, with a peak season in the fall.
Product Name : Dehydrated White Onion Chopped HS Code : 07122000 Category : White, Pink, Red Packaging Options : 20/25 Kgs PP Bag/Cartoon Box or Customized Loading Option : 14 MTS (20 FT), 24 MTS (40FT) Aroma : sweet and spicy Size : 3 to 5 mm / 5 to 7 mm Product Expiry : 2 Years in 5 C - 12 C Storage at Dry Place Source / Origin : India The Dehydrated onion chopped is manufactured from the onion flakes, which are mainly used as ingredients in ready-to-eat products to add the caramelized sweetish onion flavor. The onion chopped is also used in vegetable curries or non-veg gravy and fried dishes. It is also utilized in burgers, sandwiches, hot dogs, and pizza for a pungent aromatic flavor of onion. Due to some specific usage, the dehydrated onion flakes having large dimensions are not suitable for several food items such as grilled or steamed ones. Hence, some finer substitutes of the dry onion flakes, viz., minced, chopped, granular, and powdered are also proposed. From all these varieties, the dehydrated onion chopped is manufactured from the dry onion flakes. In the starting phase, the unwanted impurities in the form of the outer skin and plant roots are removed by the sorting process. It is then passed through the cutting machine to obtain a finer sized product of the dried onions. At the last stage, chopped onions are processed via the Vibro table having 3 to 5 mm dimensions. This final 3 to 5 mm dried chopped onions are also known as Dehydrated Onion Chopped. There are mainly three different varieties of chopped onions produced by SKY Agri Export. These are commonly categorized based on the color of the onion flakes used as the raw material, such as the White Onion Chopped, Red Onion Chopped, and Pink Onion Chopped. Out of these three types, the dehydrated white chopped onions are in high demand from North America, European countries, and Russia. The other two types of chopped dried onions, i.e., pink and red ones, are also supplied as cheaper options.
About Our Organic Camu Camu Camu-Camu is the common name for Myrciaria Dubia a small Amazonian fruit that is known as the highest vitamin C content of any plant in the world, containing 12-13% Naturally occurring Vitamin C. Camu Camu Berries Camu Camu and Vitamin C Oranges provide 500-4,000 ppm vitamin C, or ascorbic acid; acerola has tested in the range of 16,000 to 172,000 ppm. Camu Camu has 30 times the amount present in an orange Camu-camu provides up to 500,000 ppm which is about 2 grams of vitamin C per 100 grams of fruit. In comparison to oranges, Camu-Camu provides thirty times more vitamin C, ten times more iron, three times more niacin, twice as much riboflavin, and 50% more phosphorus. tiny 1 teaspoon equals about 180-250mg of Vitamin C. Approved Health Benefits of Camu Camu * Micronutrients in Camu Camu Powder contribute to: tiny immune system support tiny energy-yielding metabolism & iron absorption tiny healthy blood vessels tiny nervous system support tiny maintenance of bones & teeth tiny normal psychological function tiny normal function of cartilage tiny protection of cells from oxidative stress tiny healthy gums tiny reduction of tiredness and fatigue tiny improvement of skin health tiny regeneration of the reduced form of vitamin
Product Details: Best For : Horse Moisture : 12% Type Of Supplement : Equine Laminitis and Gastric Ulcer Recovery Packaging Size : 39 Kgs Form : Pellet Processing Type : Extruded Pellets Weight : 39 Kgs Drug Composition : Nil Equine Laminitis Feed and Gastric Ulcer Recovery Nutrition Lamicert Feed (H -440518) Salient Features A truly 100% Grain Free and Grain By-product Free feed with less than 1.5% Starch Natural Vitamin E and Selenium for antioxidant protection of Muscle Tissue Suitable for all breed of Horses Ideal Feed for Equine Suffering from Laminitis, Ulcer, Tying Up and Hyperactive Balance with all essential nutrients, so no additional top up required Daily Food for your Laminitic Horse Moisture (% Maximum) : 12.0 Crude Protein % : 18 Crude Fat % : 4.9 Crude Fiber % : 22 Digestible Energy (Hind Gut)kcal/kg : 2595 Crude Ash % : 7.4 Feeding Quantity*: 2Kgs Morning + 1Kgs Noon + 2Kgs Evening = 5 Kgs *Above mentioned is the minimum recommended feeding quantity which can be increase at the rate of 500g in different intervals. Nutrition being dynamic, so necessary increments are recommended on physical observation. For the Best Results Introduce into Horse\'s ration gradually over a week period Avoid 100% Grain, Sugar (in any form) and Starch intake Feed in conjunction with ample forage (Pasture, Hay and/or Chaff) Adjust the amount fed so its appropriate for the a horse\'s body condition, stage of training, workload, pregnancy or lactation. For Laminitis effected horses feed horses with forage less than 12% Non-Structural Carbohydrates Never starve a horse with laminitis - this can cause hyperlipaemia (which has a high fatality rate) Late cut, native species grass hay is likely to have lower sugar levels than early cut improved species grass hay. High fibre haylage may also be suitable. Lucerne Leaf based nutrition appears to have a protective effect on the equine stomach and appears to reduce the incidence / expansion of gastric ulcers in horses In instances of additional nutritional top up required HAF Nutricure Feed is recommended for horse\'s suffering from gastric ulcer. Divide the feed into three or more smaller meals. The feeding rates given here are based on the amount of feed needed to meet the animal\'s basic nutrient requirement. For extensive information please contact HAF Animal Nutritionists Additional Information: Item Code: H-440518 Production Capacity: 450 MT per Day Delivery Time: 18 Days minimum Packaging Details: 39 Kgs PP Packing
Product Description Major technical data: Accuracy class: 1.0 Power consumption: 20 years. Main functions: 1) Measurement of 50hz for 3-phase active power 2) 4 tariffs and 8 time periods for user's option 3) RS 485 communication functions 4) Manual and remote control program, and remote-metering functions 5) To record the parameters automatically through CMRI. Features: 1) High accuracy, reliability, overload capability 2) Low power consumption 3) Smt technology and re-flow soldering technology 4) Light weight, small size, easy to install. Model: DTSF318/DSSF318 Standard: IEC 62052-11 IEC 62053-21 IEC 62056-21 Productivity: 100.000pcs/year.
