CAS No:15827-60-8 Dequest: 2060 Molecular Formula:C9H28O15N3P5 Molecular weight: 573.2 Properties: DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210 centigrade degrees) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. Specification: AppearancE:Brown transparent liquid Active acid %:48.0-52.0 Phosphorous acid(as PO33-)%:3.0 max Chloride (as Cl-)%:12-17 Density(20 centigrade degrees)g/cm3:1.35-1.45 pH(1% solution):2.0 Fe ppm:35 max Usage: DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially in alkali circulating cool water system without additional pH regulation, It can also be used in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used. DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelements carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water.íí Keywords: DTPMPA,DTPMPA China,Diethylene Triamine Penta (Methylene Phosphonic Acid) Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Appearance Brown liquid Active acid (%) 48.0 - 52.0 Ph(1% solution)@25ípc 2.0 max Sp. Gravity @20/20ípc 1.350- 1.450 Chloride (as cl, %) 15.0 - 17.0 Sequestrant value (caco3) mg/g 450 min Iron, (as fe, ppm) 35 max
Appearance Brown transparent liquid Active acid % 48.0-52.0 Phosphorous acid¿as po33-% 3.0 max Chloride (as cl-)% 12-17 Density ¿20íµg/cm3 1.35-1.45 Ph¿1 solution 2.0 Fe ppm 35 max Normally in 250kg net plastic drum, ibc drum can also be used as required. Storage for ten months in room shady and dry place.
Product Name: EDTMPA , DTPMPA Product Description: "This product is one of Sebchem Key products Some of our direct/ Indirect clients are ARAMCO, ADNOC, SCHLUMBERGER, BAKER HUGHES, CLARIANT, CHAMPION, GE, SUEZ, METITO, ECOLAB, MAPEI, SIKA, ARAMCO REFINERIES, SCOTT BADER, SYNTHOMER, IFFCO. Sebchem providing its chemicals to our global clients in the Oil & Gas Upstream Oil & Gas Downstream, Petrochemicals, Industrial, Water Treatment, Construction, Detergent, Coating & Resin, Agro, Textile, Food. We supply chemicals IBCs, Drums, ISO Tanks, Bags, and up to Bulk Vessels" Price of product ( USD price or FOB price): USD Product origin: Multiple Key Specifications/Special Features: "This is one of Key products of Sebchem given to Sebchem clinets across the World. Please contact our sales team or via our website for getting TDS, SDS, COA "
DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210íµ) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. Specification: items index Appearance Brown transparent liquid Active acid % 48.0-52.0 Phosphorous acidú¿as PO33-ú¬% 3.0 max Chloride (as Cl-)% 12-17 Density ú¿20íµú¬g/cm3 1.35-1.45 pHú¿1úÑ solutionú¬ 2.0 Fe ppm 35 max Usage: DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially in alkali circulating cool water system without additional pH regulation, It can also be used in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used. DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelemen's carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics. Normally In 250kg net Plastic Drum, IBC drum can also be used as required.
CAS No.: 15827-60-8. Molecular Formula: C9H28O15N3P5 Molecular weight: 573.2 Properties: DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210íµ) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. Specification: items index Appearance Brown transparent liquid Active acid % 48.0-52.0 Phosphorous acid (as PO33-)% 3.0 max Chloride (as Cl-)% 12-17 Density (20íµ) g/cm3 1.35-1.45 pH (1% solution) 2.0 Fe ppm 35 max.
Phosphonate antiscalant and corrosion inhibitor such as atmp, hedp, edtmps, dtpmpa, pbtca and dispersant: hpma, ma-aa, aa/amps, paa, paas, pesa, pasp.
Atmp, hedp, dtpmpa, pbtca, bkc, ddbac, bta.
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Appearance : Colorless or light yellow transparent liquid Active acid % : 48.0-52.0 Chloride (as Cl-)% : 2.0(or1.0) min pH value 1 solution : 2.0 max Fe (as Fe3+) (ppm) : 20 Density 20¡æg/cm3 : 1.33 min Colour Alpha (Hazen) : 40 max.
HEDP is an organ phosphoric acid corrosion inhibitor. It can chelate with FE, cu, and ZN ions to form stable chelating compounds. It can dissolve the oxidized materials on these metals surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250¡æ. HEDP has good chemical stability under high ph value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organ phosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals. Appearance: colorless or light yellow transparent liquid Active content HEDP : 58.0-62.0 Phosphorous acid as po33-%: 2.0 max Phosphoric acid aspo43- %: 0.8 max Chloride (as cl-)%: 0.01 max Ph 1 solution: 2 max Density 20¡æg/cm3: 1.40 Fe ion ppm : 10 max Colour alpha (hazen): 40 max.
PBTCA has low content of phosphoric, has structural features of both phosphoric acid and carboxylic acid group, which enable its excellent scale and corrosion inhibition properties. Its antiscale property under high temperature is far better than that of organophosphates. It can improve zinc salt solubility, has good chlorine oxidation tolerance and good composite synergy. Appearance: Colorless or light yellow transparent liquid Active acid : 50.0 min Phosphorous acid as PO33-%: 0.8 max Phosphorous acid as PO43-%: 0.5 max Density 20¡æg/cm3: 1.27 min pH 1 solution: 1.5~2.0.
Isothiazolinones is composed of 5-chloro-2-methyl-4-thiazoline-3-ketone (CMI) and 2-methyl-4-thiazoline-3-ketone (MI). The bactericidal effect of Isothiazolinones is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes, Isothiazolinones can quickly inhibit their growth, thus leading to death of these microbes. Isothiazolinones has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, no residual, safety in operation, good compatibleness, good stabilization, low cost in operation. Isothiazolinones can mix with chlorine and most caution, anion, and non-ionic surfactants. When used at high dosage, its biosludge stripping effect is excellent. Isothiazolinones is a kind of fungicidal with properties of broad spectrum, high efficiency, low toxicity and non-oxidative, it is the ideal biocidal in industrial circulating cool water system and in wastewater treatment in oilfield, papermaking, pesticide, cutting oil, leather, detergent and cosmetics etc. Grade I : Grade II Appearance : Amber transparent liquid : Light yellow or light green transparent liquid Active content % : 14.0 min : 1.50 min pH value(as it) : 1.0-4.0 : 2.0-5.0 Density (20¡æ)g/cm3 : 1.25 min : 1.02 min CMI/MI (wt %) : 2.5-4.0 : 2.5-4.0.
HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330¡æ. HPMA has obvious threshold effect under high temperature (350¡æ) and high pH£¨8.3£©level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300¡æ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement. Appearance : Clear to umber transparent liquid Solid content % : 48.0 min Bromine value mg/g : 80.0 max Average molecular weight : 450 min pH 1 solution : 2.0-3.0 Density 20¡æ g/cm3 : 1.18 min.
Usage of HEDP: Hedp is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, hedp is used as detergent for metal and nonmetal. In dyeing industry, hedp is used as peroxide stabilizer and dye-fixing agent; in non-cyanide electroplating, hedp is used as chelating agent. The dosage of 1-10mg/l is preferred as scale inhibitor, 10-50mg/l as corrosion inhibitor, and 1000-2000mg/l as detergent. Usually, hedp is used together with polycarboxylic acid. Package and storage of HEDP: Hedp liquid: normally in 250kg net plastic drum, ibc drum can also be used as required hedp solid: 25kg inner liner polyethylene (pe) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.
Ma/aa --copolymer of maleic and acrylic acid Cas 26677-99-6 Specification of ma/aa: Appearance clear brown liquid amber transparent liquid Solid content % 48 min 50 min Free monomer (ma) % 9.0 max 5.0 max Density (20c)g/cm3 1.18 min 1.18min Ph(1% solution) 2.0~3.0 2.0+/-1.0 Usage of ma/aa: Ma/aa is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. Ma/aa can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/l is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments.
Specification of PBTCA: AppearanceColorless or light yellow transparent liquid Active acid %50.0 min Phosphorous acid(as PO33-)%0.8 max Phosphorous acid(as PO43-)%0.5 max Density (20 C) g/cm31.27 min pH(1% solution)1.5~2.0
CAS No. 6419-19-8 Molecular formula: N(CH2PO3H2)3 Molecular weight: 299.05 Properties of ATMP: ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. ATMP can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, ATMP has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, ATMP can be used in woven & dyeing industries and as metal surface treatment agent. Specification of ATMP: Appearance of ATMP colorless or light yellow transparent liquid White crystal powder Active acid % of ATMP 48.0-52.0 95min Chloride (as Cl-)% of ATMP 2.0(or1.0) min 1.0 min pH value (1%solution) of ATMP 2.0 max 2.0 max Fe (as Fe3+) (ppm) of ATMP 20 20 Density (20C)g/cm3 of ATMP 1.33 min - Colour APHA (Hazen)of ATMP 40 max - Usage of ATMP: ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred. Package and Storage of ATMP: ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place. Safety Protection of ATMP: Acidity, Avoid contact with eye and skin, once contacted, flush with water. Keywords: ATMP Related Products: Amino Trimethylene Phosphonic Acid (ATMP) Penta sodium salt of Amino Trimethylene Phosphonic Acid (ATMP.Na5) Tetra sodium salt of Amino Trimethylene Phosphonic Acid (ATMP.Na4) Potassium salt of Amino Trimethylene Phosphonic Acid (ATMP.Kx)
Hydrolyzed polymaleic anhydride (hpma) Cas no.: 26099-09-2 Structural formula: Properties: Hpma is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330íµ. Hpma has obvious threshold effect under high temperature (350íµ) and high phú¿8.3ú¬level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300íµ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma has good corrosion inhibition effect when used together with zinc salt. Hpma can also used as additives for cement. Specification: Items Index Appearance Clear to umber transparent liquid Solid content % 48.0 min Bromine value mg/g 80.0 max Average molecular weight 450 min Phú¿1úÑ solutionú¬ 2.0-3.0 Density ú¿20íµú¬g/cm3 1.18 min Usage: Hpma is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion. Package and storage: Normally in 250kg net plastic drum, ibc drum can also be used as required.Storage for one year in room shady and dry place. Safety protection: Acidity, avoid contact with eye and skin, once contacted, flush with water. 250kg net plastic drum
Water treatment chemical, ATMP, HEDP, PAAS, PAA, HPAA, EDTMPS, HPMA, DTPMPA, PBTCA.
ATMP, HEDP, DTPMPA, EDTMP.NA5, EDTMPS, PAA, PAAS, HPAA, HPMA, HEDP.NA4, ATMP, NA5..