Drawing And Annealing Machine Suppliers and Manufacturers

CJX-450/9DT high-speed copper rod breakdown machine is used to draw + 8mm ordinary copper rod into + 2.0-3.5mm wire. The drawing capstans are arranged in a line that are able to work continuously with drawing speed, mechanical parts and electrical control matching each other. It is easy to operate, easy to change dies without pause and to change spools automatically. This machine has features of easy operation, high efficiency and good quality of product.

Wire drawing machine with annealing Wire drawing machine with annealing Model 17dht Smd205t 24dht Control system Digital readout button Power control Dual inverter Wire inlet diameter 0.75-1.6mm 0.95-1.65mm 0.5-1.2mm Wire finished diameter 0.2-0.5mm 0.15-0.4mm 0.1-0.32mm Max wire speed 2000m/min 2000m/min 2000m/min Max dies no. 17(18) 24 24 Mechanical elongation 15%+8.7% 15%+13% 13%+8.7% Construction of the machine body Casting+steel plate welded and annealed Drawing capstan Ceramic coated Capstan diameter 242mm 242mm 242mm Fix speed capstan diameter 206mm Drawing/take up motor Ac55kw/ac11kw Spool bobbin size 300*215*270mm Transmission type Import advanced flat belt drive Bobbin loading unloading type Expansion shaft or single shaft cone Main motor 15kw 15kw 11kw Spooler motor 4kw Tension adjustment Weight type tension pulley Fix system Automatic control of take up by pid Max loading capacity 50kg Lubrication capacity 50l/min Lubrication type Spraying Brake Magnetic brake Lubrication type for bearing Without oil Annealing control 3 poles dc current output Annealing capacity 30 kva 21 or 30 kva 21kva Annealing voltage 0-57v Annealing current 400a 400a 300a Total power 19kw+30kva 19kw+30kva 15kw+30kva Power source 380v, 50/60hz Steam consumption 6-9kg/h 0.2-0.3mpa Coiling water consumption 4-8m3/h 0.2-0.25mpa Air consumption 15-25m3/h 0.4-0.6mpa Dimensions 3*2.5*2.3m Weight 3000kg Packing as customer requirement

4) continuously dual takeup, automatic reel-change can be done at more than 99% efficiency. Driven by dc motor, the imported plc and touch screen(siemens or preface), which is convenient for the operator to set and display the parameter on the touch screen. Seaworthy packing

Ht-450/13 large drawing machine&annealer Host machine 1)inlet wire diameter:max 8.0mm 2)outlet wire diameter:1.2-3.5mm 3)max linear speed:25m/s 4)max drawing pass:13 5)fix speed capstan dia.:450mm 6)speed ratio between capstans:1.238(1.241) 7)max size of dies:43mm x 35mm 8)main motor:278kw (dc) 9)motor for finish capstan:75kw Accumulator 10)workion pressure:0.6-0.7mpa 11)inflate value:ía 0.02mpa Dual take-up 12)max take-up speed:1500m/min 13)diamater of barrel:1.2-3.5mm 14)take-up motor:15kw(dc) 15)spooler banister capcity:max 2000kg 16)total weight:7000kg 17)machine dimensions:3000 x 2000 x 4650 Machine dimensions:3000 x 2000 x 4650 Total weight:7000kg

Ht-450/13 large drawing machine&annealer Host machine 1)inlet wire diameter:max 8.0mm 2)outlet wire diameter:1.2-3.5mm 3)max linear speed:25m/s 4)max drawing pass:13 5)fix speed capstan dia.:450mm 6)speed ratio between capstans:1.238(1.241) 7)max size of dies:43mm x 35mm 8)main motor:278kw (dc) 9)motor for finish capstan:75kw Accumulator 10)workion pressure:0.6-0.7mpa 11)inflate value:ía 0.02mpa Dual take-up 12)max take-up speed:1500m/min 13)diamater of barrel:1.2-3.5mm 14)take-up motor:15kw(dc) 15)spooler banister capcity:max 2000kg 16)total weight:7000kg 17)machine dimensions:3000 x 2000 x 4650 3000 x 2000 x 4650

The machine is used for drawing electrical aluminum rod from 9.5mm to 1.8-4.5mm, which wound by the dual take up device or coiler.

Machine type JCJX-B20 Control system Traditional analog type or By computer digital control Inverter control Dual Inverter control Drawing dies No./Max. 20 Inlet diameter ª¦0.60��ª¦1.20mm Outlet diameter ª¦0.10��ª¦0.50mm Drawing line speed 800m/min Slip ratio of m/c 15% Fix speed capstan slip ratio 10% Frame Welded by steel plate Capstan Tungsten plasma capstan Main motor 15KW Spooler motor 3.7KW Capstan dia. (Max.) ª¦200mm Fix speed capstan dia. ª¦200mm Spool bobbin size ª¦300mm or according to customers requirements Send-out method Shaft type Traversing unit synchronous motor +Belt Transmission type By flat belts Spooler control PID synchronous spooler Detecting device Weight balance by swing arm Tension control Weight balance type Max. loading capacity 40KG Lubrication type Water immersion type Brake Magnetic brake Power source 380V 50/60HZ Lubricant oil capacity 40Liter/minute Machine dimension (mm) 2000í-1300í-1050 Machine weight 2500KG

Uminum alloy. Aluminum cable steel reinforcing wires to produce the following power cables sector shaped conductors round compacted, single core presiralled. Breel is arranged quartering around the cages. The centralized side loading system can increase efficiency much more.The equipment has high rigidity, high-powerd, and high speed.

Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions..Shipping and transsportation

Wire drawing machine, annealing machine, tinning machine, wire stranding machine.

Machine type17dst Inlet diameter(mm)2.5-3.5 Outlet diameter (mm)0.4-1.6 Max. Number of drawing dies17 Slip ratio of m/c20% Fix speed capstan slip ratio15% Max. Speed(mpm)1500 Transmission methodBy gear Main machine power55kw Annealing power90kva Spooler power15kw Annealing methodDc. Three-section annealing Suitable spool630(max) Correction systemAutomatically control Capacity of take-up100-400kg Service voltage380v BrakePneumatic type Machine dimension1000l1400w2450h Machine weight7300kg Standard wooden case