Find Verified Double Shaft Mixer Suppliers, Manufacturers and Wholesalers

With dual shaft dispersers, two toothed dispersing discs, can mix material of various viscosity more efficient Normal

Dimension L x W x H 3650 x 1700 x 825 (mm) Production Capacity 15 - 25 (tons / hr) Stirring Barrel Length 2200 (mm) Motor Power 22 (kw) Weight í+ 2500 (kg) Features of Type TL-JBJ-290II 1. Specially made for the material preparation process with three functions of stirring, mixing with water & kneading. 2. Type TL-JBJ-290II works by adopt structures of two shafts separately rotating in opposite directions to treat the materials. (It is available to add hoppers according to different requirement, like type 290II-L) Adopts the package of bottom wooden frame, bolt reinforcement supporting, and outer waterproof film for the machines; and wooden trunk for other parts or the wear parts.

Product introduction: This machine is a new vertical disc mixer, which consists of mixing plate, discharge port, mixing arm, rack, gearbox and transmission mechanism. The characteristic of the machine is that the output shaft end of the reducer drives the stirring main shaft to operate, and the stirring shaft has fixed stirring teeth, and the stirring shaft drives the stirring teeth to mixing the material sufficiently. The mixer has long service life, energy saving, small volume, fast stirring speed and continuous working. The machine is mainly used for the mixing of raw materials. The inside can be lined with polypropylene plate or stainless steel plate. It is not easy to stick material and wear resistance. The cycloid pinwheel reducer make the machine has the characteristics of compact structure, convenient operation, uniform mixing, and convenient discharge and transportation. Performance characteristics: 1.High mixing efficiency and less occupied area.The spiral blade adopts high-wear special alloy. 2.The cycloidal gear reducer has the characteristics of compact structure,convenient operation,uniform stirring and convenient unloading etc.The rotation is smooth and the noise is low. 3.The disc mixer feeds material from top,discharge from bottom,which is reasonable. 4.The sealing between each combination surface is tight,so the machine runs smoothly. Working principle: The disc mixer is a new type mixing equipment for continuous running. It is mainly used in organic fertilizer, compound fertilizer and thermal power plant, and can also be used in chemical, metallurgy, mining, building materials and other industries. We adopt special wearing alloy for the spiral blade for longer service time. The disc mixer feeds from the top and discharge from the bottom with reasonable structure. it is widely used in the fertilizer processing industry, and we supply the turn-key basis fertilizer project start from design, producing, installation, debugging and technical training. The electrical motor drives the reducer, and the reducer drives the main shaft, and the main shaft drive the mixing plate to mix the materials.

this equipment has the function like mixing,agitating, homogenizing etc. weight: 3.8t Dimensions: 4670*1520*920

Twin-shaft Paddle Mixer The most important reason for the outstanding advantages of the twin-shaft paddle mixer in the mixing of feed materials is the advanced structural design. The paddle mixer is U-shaped and has two mixing shafts with evenly spaced paddles. Description The most important reason for the outstanding advantages of the twin-shaft paddle mixer in the mixing of feed materials is the advanced structural design. The paddle mixer is U-shaped and has two mixing shafts with evenly spaced paddles. The high-speed rotating paddles make the feed powder move in three directions: radial, circumferential and axial. The omnidirectional mixing method is adopted to make the feed powder mixed evenly in a very short time. If you want to add liquid to the powder, we can equip you with atomizing nozzles. Efficient and uniform mixing and liquid addition make the double paddle mixer ideal for mixing feed pellets and powder. Working principle The design of the double-shaft paddle mixer is based on a U-shaped tank with a double shaft and a paddle that extends the length of the tank. The action of the inclined paddles moves the material from the bottom and forces it down between the shafts, which provides a complete and homogeneous mixture of materials. Ideal mixer for homogeneous mixing of different components (CV< 5%) in the shortest possible time, regardless of density, shape and size. Mixing times of 30-120s.

The double-shaft fertilizer mixer relatively rotate by the axial blades with spiral blades, and the addition of water is used to spray the powdery materials to make the powders achieve controllable humidity. This equipment is mainly applicable to the humidification mixing of raw materials in the fertilizer industry, so that the materials are fully stirred, and it also has the conveying function.

WZL series automatic stainless steel double shafts paddle mixer,Non Gravity Blender Paddle Mixer machine,weightless mixer Descriptive abstract: Weightless mixer, non gravity mixer is called double-shaft paddle mixer too, it is widely applied in mixing powder and powder, granule and granule, granule and powder and a bit liquid. It is used for food, chemical, pesticide, feeding stuff and battery etc. It is high precision mixing equipment and adapts to mix different sizes of materials with different specific gravity, the proportion of formula and mixing uniformity. It can be a very good mix for which ratio reaches 1:1000~10000 or more. The machine can make the partial of granules broken after crushing equipment added. Main features: 1. High activeRotate reversely and throw materials to different angles,mixing time 1-3min 2. Compact design and rotated shafts be filled with hopper, mixing uniformity up to 99% 3. Low residue:Only 2-5mm gap between shafts and wall, open-type discharging hole 4. Zero leakageï¼?Patent design and ensure the rotating axle & discharging hole w/o leakage 5. Full cleanï¼?Full weld and polishing process for mixing hopper, w/o any fastening piece like screw,nut. 6. Nice profile: the whole machine is made by 100% stainless steel to make its profile elegant except bearing seat. Application: It is widely used in chemical, cosmetics, fine chemicals, fertilizers, pesticides, metallurgy, mining, building materials, ceramics, refractories, dry mortar, food, feed, paint, dyes and other powders, solid-liquid, solid -slurry materials' mixing. Specifications: model WZL300-WZL3000 effective volume 300L-3000L Fully volume 420-3800 Loading factors 0.6-0.8 turning speed 39rpm-53rpm total weight 660kg-2900kg total power 5.5kw-22kw length 1530-2420 width 1250-2300 height 1300-1980 power supply 3P AC208-415V 50/60Hz

 Introduction of JS500 concrete mixer JS 500 concrete mixer is twin axis compulsory concrete mixing machine, which has two mixing shafts inside the mixing drum. When the mixer is working ,both the two shafts are running.JS500 can work independently, also can be composed the concrete batching plant  Application of JS500 concrete mixer  JS500 concrete mixer can mix dry rigid concrete, plastic concrete, the mobility of concrete, lightweight aggregate concrete and every kind of mortar. It could be used for all kinds of precast plants, highways, bridges, water conservancy, ports, terminals, etc. and construction sectors. This series of products can not only be used as a stand-alone use but also be a mixing console to make up a concrete batching plant with series PL concrete batching machine. JS series of mixers conclude JS 2000, JS1500,JS 1000, JS750, JS500. Standard export packing or according to your requirement. 1.use crane to load the machines into the container. 2.use the wire to fasten the machines in order to keep them stable. 3.use the cork wood forbid collision.

JS series concrete mixer JS500 750 1000 1500 2000 As a double-horizontal-shaft forced type concrete mixer, the JS series concrete mixer has been provided with double superiorities, that is single-independent work and combinatorial function with PL series burden machine, also provide the matching engine for mixing plant, it applies to all kinds of large, middle and small scale prefabricated-component factory as well as industry and Civil Construction like highway railway bridge irrigation jetty and so on. With a high efficiency, this machine can be applied to all kinds of material, such as harsh concrete plastic concrete lightweight aggregate concrete and others. With reasonable structure, novelty layout and easy operation and maintenance, we can make design according to special requirements for meeting the demand of customers.

Description of js500 concrete mixer: Js 500 double shaft compulsory concrete mixer is widely used for mixing stiff-consistency concrete, semi-stiff-consistency concrete, light weight aggregate concrete and so on. Js500 mixer can be used alone a separated concrete mixer or used as the mixing machine of hzs25 concrete batching plant. Features of js500 concrete mixer: 1. Miniature horizontal twin shaft forced type concrete mixer; 2. Short mixing time, excellent homogeneity and reliable operation; 3. Mix hard concrete, quaking concrete, fluidity concrete, light weight aggregate concrete; 4. Shaft tip sealed by floating-ring is reliable and easy to maintain and replace; 5. Thick plate and high abrasion proof mixing blade; 6. Discharging height will be customized according to customer’s requirements. Model Js500 Discharging capacity 500l Charging capacity 800l Productivity 25m3 Max aggregate size 60/80mm Working circle 60s Discharge height 2.7m Mixing blade Speed 35r/min Quantity 2*7 Mixing motor Model Y180m-4 Power 18.5kw Lifting motor Model Yez132s-4 Power 5.5kw Pump motor Model 50dwb20-8a Power 0.75kw Dimension(l*w*h) 3030*2300*2680mm

Gear and bearing.