Pinewood Timber S2s, S3s, S4s; A. C, B And Also A Grade Panels (egp); Moudings, Posts, Plywood (film Faced Plywood, Plywood Resin, Anatomic Plywood, Amazonic Timber Veneer Faced Plywood); Timber Veneers (rotary And Longitudinal Sliced); Flat Jamb, Stair Parts, Fencing, Boards, Blanks, Internal And External Doors; Fire Resistant Doors; Pallet Lumber, Complete Linies Of Furniture (solid Wood, Mdf, Mdp, Pellet Fsc, En Plus A1, Eucaliptus And Its Derivates.
Feed mixes for animals, interior doors, charging stations.
Product: Beech and oak glued edge panels û finger joined, humidity 8+2%, sanding 120 grit, glue D3, width of one lamella 36-45, quality A/A, A/B, A/C, B/B, B/C, C/C Quality:A û side:common standard colour matching, heartwood and sapwood is not allowed, occasionally small healthy eyeknots are allowed. B û side:discoloration and healthy heartwood and sapwood is allowed, small healthy knots are allowed C - side:discoloration and healthy heartwood and black heartwood, sapwood is allowed without limitation, small knots are allowed Dimensions:thickness:from 18 mm up to 55 mm Width:up to 1240 mm Length:up to 6000 mm Packing:according customers requirement Advantages:fixed high quality standard short delivery terms tradition and know-how in wood production strategic location in the middle of Europe wide dimension scale flexibility and customers service 400 x 650 x 4000 mm, 10 pcs., 1,04 m3, 725 Kg
Solid wood panels finger-jointed.
CE certification, EN455, EN374 - Reliable protection against hazardous substances - Soft and perfectly adhesive material made of high quality latex for medical purposes, which ensures excellent handling and sensitivity - The lined cuff ensures easy donning and prevents rolling back - The size responds to the international standard - Single use - Pack: 100 pcs 70 000 packs available All on stock in Slovakia. Sending within 24 hours.
Oil paintings, frames.
Metal Containers/Pallets, Steel Conveyors /Frames, Steel Constructions And Metal Parts .
Clinoptilolite is the new ideal filter medium for swimming pools in replacement of sand. Clinoptilolite has many advantages over sand due to its high porosity, durability and cation exchange capacity. Clinoptilolite can remove contaminants such as dissolved ammonia that sand and DE filters simply cannot handle.
Hardwood Flooring Panels..
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 °C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 �°C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.