Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25±0.1mm Operating Fore: 2.0±0.5N Strong Features Type: DIP tact switch with LED LED Color: Red, Blue, White, Yellow, Green Operating Life cycles: 500000 Models with ground terminals are available of protection against static electricity. Some of output terminals can be also used as jumper leads to make the circuit design easy. RoHS and REACH Compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25±0.1mm Operating Force: 2.6±0.5N Strong Features Type: DIP tact switch with LED LED Color: Red, Blue, White, Yellow, Green Operation Life cycles: 500000 Good tactile feedback Laser etched symbol with LED illumination A variety of housing, cap options available for selection RoHS and REACH compliant
Led tact switch series main technical parameters: Circuit :SPST Current rating :50mA Voltage rating :12VDC Dielectric withstanding voltage:250VAC for 1minute Contact resistance :100 Max.(Initial) Insulation resistance :100 Min. Operating force :200 add/reduce 50gf 300 add/reduce 50gf Total travel :0.25mm±0.1mm Operating life :100000 cycles Min Solder specifications :260 for 5 seconds Function :Momentary Operating temperature :+10-+60 Illuminated: LED (red/green/blue/green/white)
Main Specifications Operating Temperature Range: -40 to +90 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: â?¥100M�© Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 1.3�±0.2mm Operating Force: 1.6�±0.5N Strong Features Type: DIP with ground terminal tact switch Operation Life cycles: 100000 Soft feeling High operating force Steady and low contact resistance Compatible with most surface mount soldering processes Improved operation by using a larger push plate RoHS and REACH compliant
Main Specifications Operating Temperature Range: -30 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 100m Full Travel: 0.15±0.05mm Operating Force:1.8�±0.5N Strong Features Type: 2 Pin DIP tact switch Operating Life Cycles: 50000 Good drop resistance Improve mounting density of components on PC board. Reflow solderable Contacts are completely sealed, enhancing reliability RoHS and REACH compliant
Main Specifications Operating Temperature Range:-20 to +70 Rated Current and Voltage:50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength:250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance:50m Full Travel:0.25 0.1mm Operating Force:1.0 �±0.3N 1.6�±0.5N 2.6�±0.5N Common Height: 4.3mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm The Height can be set at the full discretion of the consumer. Strong Features Type:2 Pin DIP tact switch Operation Life Cycles:60000,80000,100000 Variety of lever lengths Supplied with radial taping Allows automatic insertion onto PC board with the radial auto insertion machine RoHS and RAECH compliant
Main Specifications Operating Temperature Range: -20C to +70C Rated Current and Voltage: 50mA. / 12VDC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25±0.1mm Operating Force: 1.0±0.3N1.6±0.5N2.6±0.5N Common Height:3.8mm,4.3mm,5.0mm,6.0mm,7.0mm The HeighHcan be set at the full discretion of the consumer. Strong Features Type: DIP tact switch Operation Life Cycles:40000,50000,60000 Positive tactile feeling Various Knobs for low or high profile actuations Cambered terminals to ensure self retention Vertical and horizontal operating direction RoHS and REACH compliant
Led tact switch series main technical parameters: Circuit :SPST Current rating :50mA Voltage rating :12VDC Dielectric withstanding voltage:250VAC for 1minute Contact resistance :100 Max.(Initial) Insulation resistance :100 Min. Operating force :200 add/reduce 50gf 300 add/reduce 50gf Total travel :0.25mm±0.1mm Operating life :100000 cycles Min Solder specifications :260 for 5 seconds Function :Momentary Operating temperature :+10-+60 Illuminated: LED (red/green/blue/green/white)
Digital Trainer is intended for elementary as well as advance training of Digital electronics and for bread board digital circuits, AND, OR, NOT, NAND, NOR, XOR, Three State Buffer, RS Latch, JK Flip Flop, Monostable Multibrator. and UP/ DOWN Counter. Practical experience on this board carries great educative value for R & D labs, Science and Engineering Students. Specifications: 01. Breadboard : Solderless Bread board with 1680 inter connected Tie Points 02. Pulse Switches : 2 No?s. Bounce free push buttons 03. Logic Switches : 8 logic level Switches in Dip type . 04. Power Supply : Fixed: +5V at 750 mA 5. Power Sockets : Logic Probe Power Supply Sockets 06. Logic Input : 8 LED buffered logic level indicators 07. Variable Clock : Fine adjustment of clock frequency. Clock range selection L : 10 ? 40 Hz, H : 1K ? 20K Hz. 08. Jacks : 2mm to BNC Socket 2 No. 2mm to 4mm Socket 2 No.
Basic Parameters Dimensions: 201 x 99 x 35 mm Weight: 333g Adapter Input: AC 100 ~ 240 V Output: DC 24V 2.65A Display mode Segment LCD with white backlight + LED in red and green Function Introduction Charge Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries. For charging mode and current, please refer to the paragraphs of charging mode and charging current on page 2 & 3. Tester will stop charging if one of the conditions below was met. 1) Remaining capacity 99% & current intensity = 0 2) Remaining capacity = full charge capacity 3) Current intensity reduce to end charge current when constant voltage charge 4) Remaining capacity reach up the set value Discharge Constant current discharge for double loads Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered Tester will stop discharging if one of the conditions below is met. 1) Remaining capacity set value 2) Voltage set value 3) Current intensity reduce to zero Remarks: Many batteries can not measure exact current intensity, which cause an else current value appears after you set a value. However, the actual discharging current is the same with your set value. Test Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result. Normal: Test OK Shown on LCD Abnormal: Test NG Shown on LCD Possible causes and solutions for the abnormal: 1) Cause: battery voltage is too low to discharge Solution: try to charge the battery to raise voltage 2) Cause: remaining capacity is too full to charge any more Solution: try to discharge the battery to reduce the remaining capacity 3) Bad contact of battery connecting wires 4) Damaged battery 5) Tester trouble Capacity Correction The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip. Remarks: Discharging current can be set via Battery Manager. Deep discharge will cause a battery losing communication with tester, so battery dropping phenomenon may happen in the discharging process if the end capacity and voltage are set too low. In such a case, active charge will make the battery work again. 50% Capacity CD50%: charge firstly, and then discharge to 50% capacity DC50%: discharge firstly, and then charge to 50% capacity Online Functions Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine. Monitoring Battery information can be monitored via three windows. 1. Home screen Battery bar and brief information can be read on home screen. 2. Battery detail information window Show smart battery data in real time and the data can be saved and printed in image format. 3. Battery graph window Voltage, current and capacity are traced in curves. Control Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands. Attention All the functions of charge, discharge, capacity correction and 50% capacity are comply with the charging discharging conditions, which are showed on function introduction paragraph in page 4 & 5, so parameters should be set reasonably. Especially, deep discharge will cause a battery losing communication with tester. Others 1. Active cooling 2. Active batteries of zero voltage When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery. 3. Battery identification Battery information can be read from battery management chip after establishing communication. 4. Intelligent protection Against over-current, over-voltage, over-charge, over-heat and short circuit. 5. Fan Discharging mode: fan startup Other modes: fan startup when temperature above 48 Fan stop working when temperature below 40 6. Trouble alarm LED flickers in red color and current command stops when one of the conditions below happen. 1). There is not current for around 50 seconds when charge. 2). There is not current for around 25 seconds when discharge. 3). Charging time is above 8.8 hours. 4). Discharging time is above 9.9 hours. 5). Suitable for almost all laptop batteries, above 95% Structure Accessories 1).1 * adapter 2). 1 * USB cord 3). 1 * CD 4). 13 * connectors 5). 10 * cables 6). 10 * jumpers 7). 1 * loader Standard Export Carton
Ventura manufactures high mast lighting poles based on PLG 07 with complete raising and lowering systems in latching and non latching options. Our High Mast Lighting poles are regularly exported to countries such as UK, Qatar, UAE, etc. and are also installed regularly in India.
Ventura manufactures steel poles such as Street Lighting poles, CCTV poles, Tubular Poles, Octagonal Poles, Monopoles, flag poles, etc based on PLG 07 with complete raising and lowering systems in latching and non latching options. Our poles are regularly exported to countries such as UK, Qatar, UAE, etc. and are also installed regularly in India.
Telescopic raising and lowering poles are used in locations where hinging poles are not possible and the top equipment is to be brought down for maintenance purposes. These are extensively used in Indian Army, US Army, ADNOC, Petrofac and various other places.
Ventura Salasar is amongst india's most reliable and leading manufacturing of high quality products such as Beams, channels, angles, flats, and girders made up of high grade carbon steel ,alloy steel ,stainless steel and the duplex steel. Besides , we also offer customized products using special steel or alloy as per the raw material specifications shared by the clients.
Ventura is amongst india's most reliable and leading manufacturing of high quality products such as beams, angles, flats, channels and girders made up of high grade carbon steel ,alloy steel ,stainless steel and the duplex steel. Besides , Ventura also offers customized products using special steel or alloy as per the raw material specifications shared by the clients.
Hinging poles comes in variety of options such as mid hinged, base hinged, top hinged, cabinet hinged, etc. These are extensively used worldwide for operations wherein the equipment is to be brought down for maintenance purposes.
We manufacture following products: 1. flat 2. angles 3. channels 4. u beam 5. np beam 6. h beam 7. i beam 8. w beam 9. high mast lighting poles 10. stadium masts 11. street light poles 12. cctv poles 13. telescopic poles 14. mid hinged poles 15. cell on wheel towers 16. hot dip galvanizing solutions 17. portable sports lighting solutions 18. led stadium lights 19. led street lights 20. led flood light 21. led high bay lights 22. tubular poles 23. octagonal poles 24. customized fabricated steel structures 25. crash barriers 26. transmission towers 27. monopole towers 28. solar mounting structures 29. downlights 30. panel lights 31. foundation bolts 32. emergency lights 33. flag poles 34. tubular columns 35. led battens and tube lights 36. customized led products manufacturing.
Features Specifications: Membrane Switches with Embedded LED's A membrane switch with embedded LED's is generally described as a thin, low profile, micro-motion front panel keypad, utilizing one or more layers of polyester. Screen printed conductors are printed on each layer, and pressure-sensitive adhesives are used to bond the polyester layers together. The assembly may also include passive electronic components, such as resistors or capacitors that are adhered to the membrane switch substrate using conductive adhesive technology. Other options that are often provided on the front panel include an adhesive mounting sheet to attach the keypad to a housing or sheet metal bracket, and a graphic overlay - which provides the cosmetic appeal that is most often associated with a touchpad assembly. The display panel would include either tactile or non-tactile switches as part of the front panel. Thus, a bonded assembly can also be described as a non-tactile, or tactile, membrane switch assembly.
Switches-tactile switch, slide switch, push switch, hook switch, dector switch, micro switch, led ceiling light.
Membrane switches Jasper has accumulated many years of membrane switch making experience, and most of our people have been in this business for more than five years. We maintains a work force of highly trained engineers who are able to quickly respond to customers differentiate demands for membrane keypad products. Characteristics: Light and slim, dust-proof, insulation, anti-shock and easy assemble. Applications: Medical device, industrial control, home electronics, and precise instrument industries etc. Membrane switch options There are a number of options within a membrane switch as described below Texturing Tactile devices Backlighting Rfi screening Surface mount devices Types we supply: Flat type Tactile feeling type W / metal dome Led-embedded Membrane circuit Metal dome arrays Export standard
