Dab O Ink Classic Inks 110Ml Suppliers and Manufacturers

Request an online quotation for Flexographic Printing Ink via our website at: https://www.indevcogroup.com/plastics-converting/flexographic-printing-ink/ Flexography printing ink is mainly used in the packaging industry, producing high-quality impressions with a simple printing process. Best used for printing on corrugated containers, folding cartons, multiwall sacks, paper sacks, plastic bags, milk and beverage packs, disposable cups and containers, labels, adhesive tapes, envelopes, wrappers (candy and food), and others.

Gravure printing, also known as rotogravure printing, is ideally used in long runs and high-quality printing for refined and detailed image using presses and components. Request our Gravure Printing Ink via our website online at Indevcogroup.com Best used for printing on: Food packaging, PE bags, wrapping paper, and others.

TurbFlex is our Premium Environment friendly water base ink Series for use on Flexographic Presses. TurbFlex ranges of water based flexo inks have stable Ph and viscosity on press is recommended for Paper Cup, Kraft paper application Performance Characteristic - Strong Color & Good Gloss - High Mileage - Good Ink Transfer - Good Printability - Light Fastness Property.

UV Inks & Coatings - Range Of UV Coatings - Packaging Industry Gloss / Matt / Texture / Playing Card - Silk Screen Embossed (Crystal) - Flexo Gloss / Matt texture / Tactile - Industrial Application Profile - Gloss / Matt / Structure Texture - Single Stroke

UV Flexo Inks Maxflex is a range of UV flexo inks intended for printing of labels, tags, sleeves and other applications found in narrow web reproducing quality at speed. Performance Characteristic - Max flex inks have optimized flow for press performance - Vibrant color strength at finer anilox with lower ink consumption - Fast curing for higher press speed - High Gloss - Led flexo process colour and base colour

UV Offset Inks - UV Sheetfed Process Colors - LED UV Sheetfed Process Colors - Base Concentrates & Spot Colors - UV Web Process Colors - Led UV Web Process colors - Dry offset inks for plastic cups

1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so

Silkbond 35

Silkflex Nylon Oxal

Silkflex Part B

Silkflex Eco Oxal

Silkflex Crosslinker

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 110 - 135oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%