Standard wire diameter of cut wire: 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.45mm, 1.5mm... According to customers requirements. Used: Straight cut wire used in binding up construction materials or other items. Straight cut wire is made of galvanized iron wire straightened then cut into pieces of various length according to your requirement. Name Wire Diameter Length Mild Steel Tie Wire 0.6 According to customers requirements. 0.7 0.8 0.9 1.0 1.2 1.45 1.5.
Material: Hard steel wire, galvanized wire, annealed wire Features: Simple use, easy transportation Use: Widely used in construction, making of handicrafts, daily uses and other ues.
Cutted wire
Cut wire Note: detail specifications can be produced according to client's request. Material: electric galvanized iron wire, hot-dip zinc-plating iron wire, black iron wire. Inner plastic, outside hemp or pvc
It is easy for transport and handle, finds popular application in construction, handicrafts or daily use. We also supply tie wire in coils and other forms. Standard specification of straight cut wire: wire gauge (wire diameter from 0.6mm to 4.5mm) while the length varies according to our customers' needs. Plasitic.
Yihe produces cut wire of different sizes as baling wire or binding wire in construction. Materials can be galvanized iron wire or black iron wire Name: mild tie wire diameter(mm):0.6, 0.7, 0.8, 0.9, 1.0, 1.2, 1.45, 1.5: Length: according to customers requirements At buyer's choice
Cut wire of different sizes as baling wire or binding wire in construction. Materials can be galvanized iron wire or black iron wire.
Cut Wire Straight cut wire used in binding up construction materials or other items. Straight cut wire is made of galvanized iron wire straightened then cut into pieces of various length according to your requirement.
Cut wire Straight cut wire used in binding up construction materials or other items. Straight cut wire is made of galvanized iron wire straightened then cut into pieces of various length according to your requirement. Standard wire diameter of cut wire: 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.45mm, 1.5mm.
Solar Wafer Cutting wire Silicon Cutting Sawing Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity
Wire blast carbon steel and wire blast stainless steel can be used in the following three areas :1)Cutting use(cylindrical shape with sharp edge) 2)Section state (comers are round) 3)Integral state (ball shape). The Stainless steel of wire blast becomes toughter as it is used. Therefore, it can be used as an abradant for much longer time.
This steel has a high carbon content and is of good grade. It is built into the construction of the tyre to endure bumps, heat, and other potentially dangerous situations. As a result, recycled tyre wire is of very high quality and meets industry standards. To prevent machines farther down the processing line from usury, contemporary technologies tend to remove the wire as soon as possible. Pre-shredding is commonly followed by a first granulation step, in which the rubber chips are filtered through a 15 to 25 mm screener, depending on the plant layout. A magnetic mechanism separates the steel wire from the rubber immediately after this granulation. Along with the wires, 10 to 35 percent by weight of rubber and textiles are removed, hence the total material recovery varies depending on the contamination grade of the material (rubber/fiber). Steel typically makes up 10% to 20% of the weight of an old passenger car tyre. A typical shredding factory generates huge quantities of steel tyre wire, with quality varying depending on the technology, storage, and management systems used by the factories. Another important component in assessing the material's quality is the steel's resistance to atmospheric agents. The material is quickly oxidised since it is shaped in tiny wires. As a result, protecting the wire from any atmospheric contaminants is an important part of improving its quality.
Cut wire used in binding up construction materials or other items. Straight cut wire is made of galvanized iron wire straightened then cut into pieces of various length according to your requirement. Standard wire diameter of cut wire: 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.45mm, 1.5mm.
Solar Wafer Cutting wire Silicon Cutting Sawing Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. Advantage of Sawing Wire for Solar Wafer Cutiing -------- Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology INTRODUCTION: Solar Wafer Cutting wire Silicon Cutting Sawing Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated Can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size of h wheel.
Sawing wire for multi sawing solar wfter cutting Item: Sawing wire for multi-wire sawing Ultra Fine Wire Saw For Cutting High Hardness of Monocrystalline Silicon Shape:wire Material: Imported C-steel Coating:Brass,combinations Number of wires:1 wire Other Name: Solar Wafer Cutting wire Silicon Cutting Sawing Wire Diameter:65um-350um available Advantage of Sawing Wire for Solar Wafer Cutiing
STRAÄ°GHTENED AND CUT WIRE: Related Standards :ISO EN 10257-1 & 2, ISO EN 10244-2, ASTM A461 Raw Material :galvanized wire - annealed wire - Cold drawn wire Diameter Range :2,50mm - 6,00mm Coating Thickness :30gr/m2-380gr/m2 Wire Grades :180-4.000mm Usage : Industirial Purposes Construction Enviromental Security Systems Packing : in bundles of about 50kg - 1000kg or according to customer request.
Introduction: Specifications: Carbon steel cut wire shot Shape: spherical (conditioned) and cylinder (as cut) Specs: 0.2mm-2.5mm Durability:6500 times Moq: 25kgs Sample free Certificate:iso9001:2008, gb/t470-1997 Standards: ams 2431, mil-s-13165c, din8201, vdf 8001, saej827, saej441, jb/t8354 Usage: shot blasting;shot peening;surface cleaning, rust remove, surface treatment
Introduction: Specification: Application: It Is Used For Removing Oxidation Skin, Burr, Eliminating Surface Defect, Removing Stress, Etching, Unknit, Strengthen, Prevention Rust Before Painting Of Metal Die-casting, Precision Casting, Hardware Tool, Machinery Manufacturing, Automobile Spare Parts, Apparatus, Pump Valve Industry.
Materials: Wire materials for straight cut wire can be bright iron wire, annealed wire, electric galvanized wire, pvc coated iron wire or painted iron wire. Processing; Straight cut wire is a kind of tie wire made of iron wire cutting to certain sizes after being straightened. Then we can cut this product into pieces of various lengths according to customers requirement. Straighten cut wire is easy to transport and handle, and finds popular application in construction, handicrafts or daily use. Specifications of straighten cut wire: Standard specification of straight cut wire: wire gauge 8-23 (wire diameter from 0.6mm to 4.5mm) while the length varies according to our customers' needs.
Straight cut wire is produced in different sizes as baling wire or binding wire in construction.And the materials can be galvanized iron wire or black iron wire.It is very conveniently for use and transportation. Inside plastic film & outside hession cloth and inside plastic film & outside with bags
