Cross Beam Suppliers and Manufacturers

We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.

Origin Indonesia Height - 35cm Diameter - 25cm Color :Yellowdish (Clean) Packaging : standard Minimum order : 50 pieces

Grade - Q235/Q235B/Q345/Q345B/SS400 Technique - Hot rolled/Welded Material - Q195,Q235,Q345,16Mn,20#,45#,A53,A106,St37,St35.4etc thickness - 0.5mm-12mm(+/-0.1mm) OD - 15*15mm-400*400*mm(+/-0.1mm) Length - according to the customer's requirement Surface treatment - Galvanized/ Varnish Painting/Black Painting/Color coated Application - Petrol/gas/water delivery, construction, chimney pot, furniture ,machinery

Cross Fitting

Southern Pine Beams

Dark Red Meranti = DRM ***** Origin Indonesia ***** Vary sizes by demand ***** 78mm x 86mm x 6000mm ***** Loading in 20ft = 24 m3 ***** Payment by Bank Transfer

Black Granite Monument / HeadStone with Cross

AZK02 Mounting kit for shear beams F3201 and F3831

F3203, F3833 Bending Beam to 500 kg

F3201, F3831 Shear beam to 10 t

* I-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the I-shaped. I-section steel is divided into hot rolIed I-beam and lightweight I-beam The characteristics of galvanized I steel: 1. Strong corrosion resistance: the thickness of hot-dip galvanized layer can reach more than 300 m; 2. Good plasticity and toughness: no deformation in cold bending; 3. High strength: it can be used as the load-bearing framework of ceiling enclosure plate. 4. Good fire resistance: high melting point (1000 C), strong fire resistance; 5. Long service life : 100 years. 6. Flexible and fast installation: short construction period. 7. The color is bright and durable, without surface decoration Standard DIN GB JIS BA AISI ASTM EN GOST etc. Shape : I -Beam Materials : Galvanized steel Size : As customer request Packing : By bundles with steel strips or as customer request Application : Mechanical&manufacture,Steel structure,Shipbuilding,Bridging,Automobile chassis, etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period

* Stainless steel I-beam is a long steel bar with a grooved section. It can be used to form various stress components according to the different needs of the structure, and can also be used as a connector between components. It is widely used in various building structures and engineering structures, such as house beams, bridges, transmission towers, hoisting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves. Stainless steel I-beam is a carbon structural steel used for construction. It is a simple section steel, mainly used for metal components and plant frames. Good weldability, plastic deformation performance and mechanical strength are required in use. The raw steel billet of stainless steel I-beam is low carbon square steel billet, and the finished stainless steel I-beam is delivered in hot rolling forming, normalizing or hot rolling state. Product Name : Stainless : Steel I beam Standard : DIN GB JIS BA AISI ASTM EN GOST etc. Size : As customer request Technique : Stainless steel Packing : By bundles with steel strips or as customer request Surface Treatment : Sandblasting, solution pickling Application : Mechanical & manufacture,Steel structure,Shipbuilding,Bridging,Automobile chassis, etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

* H-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the H-shaped. H-section steel is divided into hot rolIed I-beam and lightweight H-beam * II-H-beam is mainly divided into ordinary H-beam, light I-beam, low alloy light I-beam . * The wing of ordinary H-beam and light H-beam gradually thinner from the root to the side, with a certain Angle. The type of ordinary H-beam and light H-beam is expressed by the Arabic number of its waist height in centimeters. . H-beam is mainly used in building structure, curtain wall engineering, mechanical equipment ,vehicle manufacturing and so on Standard DIN GB JIS BA AISI ASTM EN GOST etc. Shape : H -Beam Materials : Carbon steel Size : As customer request Packing : By bundles with steel strips or as customer request Application : Mechanical & manufacture,Steel structure,Shipbuilding,Bridging,Automobile chassis, etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period. Application field * The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow.

With the rise of new economic building materials, galvanized H-shaped steel is widely used, especially in steel structure buildings, supports, and bridges. In short, it is integrated with many aspects of daily life. H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used. H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc. Product : Galvanized H beam Standard : AISI, ASTM, BS, DIN, GB, JIS, etc Web Width : 100-900mm Thick: 5-16mm Flange : Width:100-400 Thick: 7-34mm Length : 5.8m-12.0m or as your requirement Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts. Surface : Perforated/galvanized/black Inspection : BV,SGS,MTC,etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period

* H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used. * H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. * And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc. Product : Carbon Steel H beam Standard AISI, ASTM, BS, DIN, GB, JIS, etc Web Width: 100-900mm Thick: 5-16mm Flange : Width:100-400 Thick: 7-34mm Length : 5.8m-12.0m or as your requirement Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts. Surface : Pickling, Phosphating, Galvanizing Inspection : BV,SGS,MTC,etc. Warehouse : Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project. Application field * The company adheres to the corporate spirit of never being satisfied and striving to surpass, and continuously creates new brilliance with the new economic concept of continuous innovation. Reward guests and friends from all over the world with satisfactory service. Our company is willing to cooperate closely with friends from all walks of life at home and abroad, and work together to create a better tomorrow

* Stainless H beam is widely used in beams and columns of industrial and civil steel structures. Steel structure load-bearing supports for industrial structures. Ship and machinery manufacturing frame structure. Steel piles and supporting structures of underground works. * H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used. Product : Stainless H beam Standard : AISI, ASTM, BS, DIN, GB, JIS, etc Web Width: 100-900mm Thick: 5-16mm Flange : Width:100-400 Thick: 7-34mm Length : 5.8m-12.0m or as your requirement Packing details : In bundle with 6 circles of steel strip, each bundle about 2mts. Surface : Sandblasting, solution pickling Inspection : BV,SGS,MTC,etc. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.

Composition : Indonesian teakwood. Color : white, black, natural, brown.

Alloy Steel Forged Cross