We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, Rubber Scrap, Paper Scrap, etc. Chemical Composition: Material: Quality Copper wire Wire Diameter: 0.30mm, 0.25mm, 0.20mm Weight / spool: 3 kg, 5 kg, 7 kg, 15 kg, 20 kg Tensile strength: 1000 N / mm2, 900 N / mm2, 500 N / mm2, 450 N / mm2, N / mm2
We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, Rubber Scrap, Paper Scrap, etc. Chemical Composition: Material: Quality Copper wire Wire Diameter: 0.30mm, 0.25mm, 0.20mm Weight / spool: 3 kg, 5 kg, 7 kg, 15 kg, 20 kg Tensile strength: 1000 N / mm2, 900 N / mm2, 500 N / mm2, 450 N / mm2, N / mm2
PRODUCT QUALITY AND SPECIFICATIONS: MILLBERRY No1 COPPER WIRE SCRAP shall consist of clean, untinned, unalloyed copper wire and cable, not smaller than No.16 B&S wire gauge, free of burnt wire which is brittle. Hydraulically briquetted. SPECIFICATION: Clean Grade A (99.97% to 99.99%) scrap copper wire. The copper wire consists of clean (free of any insulation), unpinned, uncoated, unalloyed copper wire, free of hair wire, brittle burnt wire and excessive oils minimum. Waste identification code B1010-Basel Convention, Annex IX. Copper wire diameter: 1mm-3mm Chemical analysis: Copper content of 99.97%-99.99% re-melt recovery rate. Chemical Composition: Element: (%) Copper: 99.99% Min Lead: 0.005% MaxBismuth: 0.03% Max Total impurities: 0.03% Max Excluding Ag & Oxygen Standard confirming to: (11000(ETP) content 99.95% (shall be rejected should it be below) ORIGIN: Oman QUANTITY: 1,000 MT Trial x 1 month / (15,000MT x 12 months) rolling over after annual price review contract 13 Months CONTRACT: 13 MONTHS PRICE: USD $4250 / MTS CIF PACKAGING: Loose in BULK -Packed in Jumbo Bag LOADING PORTS: Sohar Port,Oman DESTINATION PORTS: Mundra Port, India SHIPMENT: First shipment 30-35 days upon receipt and confirmation of the LC/BG PAYMENT TERMS: Chose Option given 1) 100% Irrevocable Transferable Letter of credit (LC) 2) 100% Irrevocable Transferable Document Letter Of Credit (DLC) 3)100% Irrevocable Non-Transferable Letter of credit (LC) 4)100% Irrevocable Non-Transferable Document Letter Of Credit (DLC) Kindly state your LOI to dynamicfortetrading@gmail.com with full details.
Copper Millberry Scrap USD$/MTS Copper Cathode New USD $/MTS Minimum Order 1,000 MTS or Above USED RAIL USD 245.00/MTS HMS1 & HMS2 Mix Scrap (price end)/MTS Minimum Order 50,000MTS Shipping Terms Costs,Insurance & Freight (CIF) Payment Terms 100% DLC/ LC / SBLC / BG From Prime Bank CONFIRMED Bank Instrument 100% PAYABLE AT SIGHT upon presentation of documents shipment documents for 60% and remaining 40% upon ARRIVAL OF THE GOODS AT THE DESTINATION PORT SUBJECT TO FINAL INSPECTION Remaining Final Payment is 5 working days after the final SGS inspection at the buyers delivery port after unloading of goods balance 40% at sellers bank account percent of the total amount of shipment on the confirmation or local SGS at the destination sea port. NON-COMPLIANCE PENALTY I. If the buyer fails to issue the bank instrument the seller has full right to fine Penalty 2% of the full shipping value shall be paid II. If the sellers fail to ship the goods as per contract ninety (90) days a fee equal to two percent (2%) of the full shipment value shall be paid. DOCUMENTS & VERIFICATION Proforma invoice, Bill of Lading, Cert. Of Origin, Cert. Of Quality, packing list/Cert. Of Quantity, Master receipt of samples, Customs Clearance SGS or its Equivalent inspection document, Cargo Insurance Cert; Cert. of Ownership. All These documents originals will be given to buyer after shipment of commodity for confirmation and to approve payment to seller. ORIGIN: South America (Chile), South Africa, Oman or Saudi Arabia. CONTRACT: 12 MONTHS PACKAGING: Loose in Bulk or buyers option MARKINGS/LABELS: when applicable VALUE: 110% From Invoice Amount SHIPMENT: First shipment 30-35 days upon receipt and confirmation of the /LC/DLC Please take note commission will be lower if the customer reduces from the price given & Strictly no high up price allowed.
A grade electric copper wire cable and mill berry copper available at good prices.
Total 31 MT of Cable: 26MT of Cable with 53% Lead, 41% Copper, 6% Paper. 5MT of Cable with 64% Lead, 31% Copper, 5% Paper. 3100 EUR/MT CNF Jebel Ali
Our company are seeking for a potential and interested cathodes and millberry copper legit quality buyer. We can supply 10,000MT monthly, please do not hesitate to contact us for further concerns and questions. +12017623698 / +12018037840 US/Whatsapp/Viber email: Z8mel at hotmail dot com Commodity: Non-LME Registered Electrolytic Copper Cathodes Grade A Origin: DR Congo/Zambia Quantity: 1,400MT Cu Purity: 99.99% Loading Port: Dar Es Salaam, Tanzania Port of Destination: To be advised Delivery: Immediately after signing contract Packing: In Bundles banded by aluminum bands Contract Length: 12 Months Price: LME Less 28% Specification: Copper Cu 99.97% -99-99% PHYSICAL: Length, width and thickness of each sheet shall be equivalent to generally accepted LME internationally accepted measurements. The Copper Cathodes surface condition shall be free of imperfections, defects and excess exposure to outdoor weather. Dimensions: 914 mm x 914 mm x 12 mm (LME Standards) Weight of each sheet: 125 Kilograms (Approximately ± 2%) Net weight of each pallet: 2.000 Kilograms (Approximately ±2%) Net weight per container: 20.0 Metric Tons (Approximately ± 2%) Gross weight per container: 22.2 Metric Tons (Approximately ± 2%)
COPPER CATHODE 99.99% original RDC / ZAMBIA / South Africa .
Type Copper Wire Recycling Machine Brand Shiglo Capacity 80-100Kg/hr Motor Power 22kw Weight 1100 Kg Work Mode Automatic Product dimension 2600mm*1600mm*2000mm Recycle Material Copper Wire Design Compact Ideal For Copper Wire, Shredded Wire, Jumbled Wire
I would like to inform you that we now accept payment with dlc / lc for copper cathode 99.99% with tt 100% after vessel, s arrival in port of destination and after second sgs inspection. Minimum quantity: 1, 000 mt/month x 12 months. Origin drc. Loading port: durban. Price lme-15%
Heavy Copper Scrap Bus bars, Item Properties Copper 99.9% Use for melting i.e foundry
Used in the production of electrical conductors, switches, transformers, and telecommunications.
copper cathode, wire scrap copper , HMS1 &2 JP54, JA1 , antimony ore buyer & seller metals, petroleum products
Introduction: We offer the copper scrap at very competitive prices and the delivery is prompt. We pack the copper scraps loose in 20 or 40 ft containers or as per buyers request.
Copper Wires
1.5mm-20mm Copper Balls for Electronics 1) Size: 1.5mm-20mm 2) Description: Material having good corrosion resistance and it is inset to most common used fuels it exhibit excellent conductivity. 3) General Applications: Brass resist corrosion From petroleum Products echo heavy Brass boll are use in valves petroleum products loch hole electronic industry. 1.5mm-20mm Copper Balls for Electronics 1.5mm-20mm Copper Balls for Electronics
Copper Cathode: PRICE (CIF) : 5200$/MT ORIGIN: VIETNAM QUANTITY: 20.000 Monthly
Material: Copper,Brass 1.Size 1.0mm-25.4mm 2.Characteristics: With a low coefficient of friction, axial and radial movement. 3.Applications: Mainly used for valve, spray, instrument, pressure gauge. The meter, carburetor, electrical accessories, etc.
CopperCathodes99.99-99.97%CuPurePriceGradeAProductPrice(USDprice):1000MTorless:LME-6%,1500-3000Mt:LME-8%,3500-5000Mt:LME-10%,5000Mtandmore:LME-13%Terms:CIFtoallportsintheworld Productorigin : Democratic Republic of LAO Sand South Africa Dimension : 914 MM**12MM Weight : 125 kg(+/-1%) Netweight : 2 MT(+/-1%) Minimum quantity : 100MT Per Month Maximum number : 100,000MT/Month X 12 months
Souvenir soft enamel copper Medal,Copper Medal For Sale, Custom Souvenir Decoration Metal,Medals Process: Soft enamel Materialï¼?Zinc alloy Size:Custom Sample:Free Product descriptionï¼?Soft enamel Medal is one of our main product, We can customize production according to your ideas and needs. Welcome to consult us! Material: Copper, Brass, Zinc alloy, Steel. Stainless steel, Tin Crafts process: Cloisonne, Imitation cloisonne, Soft enamel. Etched. Die cast, Printing, Laser. Accessories: Metal clutches, Rubber clutches, Rings, Ribbons, Chains Size: Custom-made Packing: OPP/PC wowtopgifts co.,ltd is one of the most professional custom design woven labels, embroidery woven patch and souvenir print medal manufacturer in China. We have a whole set of quality management system.We can produce your design with quality, efficiency and affordability!If you have interested in our products, Please click here to visit more.
