100% Natural Zeolite with more than 95% Clinoptilolite. Our Zeolite is the best quality. We export from Ukraine o other countries. Our Zeolite granular are 0-0, 08mm, 0-2mm, 0-5mm, 2-5mm, 5-10mm, 10-16mm, 16-32mm. The packs are in 25kg, 50kg and 1000kg Big Bag. Our Offers we can EXW, FOB, CIF. Min. order in 20ft container we can load 20 MT palletized. Our prices are Unbeatable! Our company Vision are to people, environment, water, air, animals For customers always find the right solutions and propose.
Our fly ash is used for cement and concrete production.
Butane gas cartridge Net weight: 190gr Suitable for camping, indoor and outdoor use. High quality product complying with en 417 and european standards. 48 pcs/ctn or 36 pcs/ctn
We are manufacture for concrete admixture raw metarials orijin Turkey.
Cement based, thick aggregate, thixotropic, Class R4, high performance repair and filling mortar. It is enriched with fibre and polymer additives. It has high strength and does not crack.
Akfix C900 is polyester injection mortar for general purpose for solid and hollow supports having a short cure time. It is suitable for use in concrete, perforated bricks and cavity blocks in a wide range of applications. Suitable for solid and hollow structures. High solid content. Easy to extrude and to inject. Thixotropic, can be applied in vertical and horizontal direction. Fast curing.
Rockwool, also known as mineral wool, is an insulation material made from natural stone or mineral fibers. The density of Rockwool refers to the mass of the material per unit volume, and it is commonly expressed in kilograms per cubic meter (kg/m�³) or pounds per cubic foot (lb/ft�³). The density of Rockwool can vary depending on the specific product and its intended application. Common densities for Rockwool insulation products range from approximately 40 kg/m�³ (2.5 lb/ft�³) to 200 kg/m�³ (12.5 lb/ft�³) or more. The choice of density often depends on factors such as thermal performance requirements, structural support needs, and the specific application of the insulation.
Oil putty BEIGE. Tough, malleable sealant for surfaces such as wood, metal and glass. Size 1 kg 2.5kg BEIGE oil putty. Tough, malleable sealant for surfaces such as wood, metal and glass. Skin formation time approx. 12 â?? 30 days. Temperature and humidity are very important. Must be painted over with primer or glaze after 4 â?? 6 weeks at the latest. Weight n/a Size 1kg, 2.5kg
We offer : ISE MEL-101 is a powder form superplasticizer of a sulphonated polycondensation product based on melamine. Is especially optimized forplastification and water reduction of cement andcalcium sulphate based materials, e.g.
AREA OF USAGE: PLASTER AND PLASTER PLATE ROAD COATING SOIL CONDITIONER - FERTILIZER SPECIFICATIONS: DRY SOL�°DS @60C %60 -90 DRY SOLIDS @250C %60-90 W.S P205 % 2 MAX UNREACTED P2O5 % 1.5 MAX CO.CRYST.P2O5 % 1 MAX T.P2O5 % 4.5 MAX SO3 % 48 - 55 CaO % 33 - 41 Na2O % 0.35 MAX Fe2O3 % 0.30 MAX Al2O3 % 0.40 MAX K2O % 0.02 MAX MgO % 0.03 MAX Sio2 % 11 MAX F % 2 MAX CI PPM 700 MAX ORGANIC MATTERS % 0.5 MAX
PHYSICAL PROPERTIES Physical state: Liquid Appearance: Colorless, Clear Chemical Formula: Ca (NO3) 2 pH: 6.00 - 8.00 (in 10% water) Density: 1.350 - 1.380 gr / cm3 @ 20 C It is used as a set accelerating additive in concrete chemicals. It increases the early strengths of concrete without negatively affecting the final strengths. Shelf Life: 12 months Packaging: 200 kg, 30 kg, 60 kg plastic drums 200 kg barrel 1000 kg IBC Pouring.
DEFOAMER DFK-25 Used As A Defoamer In Concrete Applications. It is a silicone based defoamer. It shows a strong defoaming effect even when used in small amounts in water-based systems. Product performance is not affected by the pH of the system. Shelf Life: 12 months Packing: 200 kgs/ iron drum net (16tons/FCL); 1000kgs/IBC (18tons/FCL); 20-23 tons/ isotank.
High Slump Retention. PCE-High Slump Retention is a new generation superplasticizer for concrete. It contains polycarboxylate ether polymers and is specially formulated for ready-mix concrete where slump retention, high strength and durability are required in hot climates. It is chloride-free, meets SS EN 934, Set retarding/high range water reducing/superplasticizing admixtures, and ASTM C 494 requirements for Type F & G. It is also compatible with all cements meeting the ASTM standards. As an ideal admixture for the ready-mixed concrete industry, PCE superplasticizer has the ability to work with a low water/cement ratios and still obtain extended slump retention to make high-quality concrete.
SD390/490/400,B500B/GR460B,HRB400/500,ASTM A615 GR40/60 Standard BS4449,JIS,ASTM/A615 Length 6m,12m Application Widely used in construction industry for reinforcing concrete(Express way; office building, Bridge etc) Transportation By sea(20' 40' container, In different countries, rebar is produced based on different standards, and in each standard, there is a definite classification in relation to the mechanical properties of steel,
We are interesting in buying off spec chemicals as follows. We are in Recycle liquid Business. We buy off spec chemical, stock chemical, expired chemicals, and Mixed Glycols, IPO. And Spent Catalyst from chemical and refineries We are interesting in buying off spec Material, Waste chemical to Recover from Process Paint & Printing Industry: Iso Propanol, N- Propanol Ethanol, Methoxy Propanol, Ethyl Acetate, Butyl Acetate, , Methylene Chloride, xylene, & Toulene, Flexo Thinners . Oil and Petrochemicals. MEG, DEG, TEG, Butyl Glycol, Ethyl Glycol, Mono Ethanol Amine And DI-Ethanol , Amines , Solvents, Naphtha Coating Industry: Solvents. and Blastic Chemicals. Copper Slag also interesting in Recycling Process of chemical Expired chemicals, /Paints Solid waste , Waste Water . Solid Waste - Reducing Agents and Oxidising Agent and Liquid Waste : Acid/Base solution, Organic /Inorganci Solution , Heavy metal We sell Recyle Solvents VariousType and Qulaity. Mainly for Paint, Varnish and Coating Industry
Cosmetic chemicals refer to a diverse group of chemical compounds used in the formulation of cosmetics and personal care products. These chemicals serve various functions, including enhancing product stability, texture, and shelf life, as well as providing desired properties such as moisturization, UV protection, and color. Common cosmetic chemicals include emollients (e.g., oils and fatty acids), surfactants (e.g., detergents and foaming agents), preservatives, fragrances, and pigments. They are carefully selected and incorporated into cosmetic formulations to create products that cleanse, moisturize, beautify, and protect the skin, hair, and nails, catering to the wide range of consumer needs and preferences in the beauty and personal care industry.