Nylon 6 Monofilament, also known as Polyamide Monofilament, with adipic acid and hexamethy diamine or caprolactam forms through the polycondensation reaction and melt spinning synthetic filament, strength is more than 3.7~4.2Cn/Dtex.Nylon Monofilament could be used to produce elastic yarn which is featured with best strength and wear resistance among all fibers. Application: The fabric which is blended or interwoven with Nylon filament or Nylon and other staple fibers have typical characteristics and strength of those blended fibers. In civil field, this yarn could be blended or pure spun into various medical products and knitwear, such as single-fiber stockings, elastic stockings, all kinds of wear-resistant nylon stocks, nylon scarf, mosquito nets, nylon lace, stretch nylon coat, different nylon silk or interwoven silk products, Nylon rope, Ribbon, fishing fiber, fastener, brush, wedding dress and window screening or voile,etc. Specification: Luster: BR and SD Cross Section: Round, Triangular PackageL 2.2kg/cone,12 cones/ctn Application: Weaving, knitting, texturing, covering. 8D/1F BR,SD, Trilobal BR 15D/1F SD,BR, Round 20D/1F SD,BR,Trilobal BR,Round, Triangular 30D/1F SD,BR,Trilobal BR,Round, Triangular 40D/1F SD,BR,Trilobal BR,Round, Triangular 50D/1F SD,BR,Trilobal BR,Round 70D/1F SD,BR,Trilobal BR Round Specific filament could be tailored as length or weight setting. Features: 1). Tenacity: 3.9~5.0Cn/Dtex 2). Elongation: 36%,±6% (30%~40%) 3). Dtex:±3.5% (AA) 4). Shrinkage: 13%, ±3% (10%~16%) 5). Dying uniformity: �3 grade 6).Quality Classification: AA, A, Qualified. 7). If need black monofilament, massive quantity is must. 8).Monofilament from process of One-step and Two-step spinning available, quality from excellent to common, different requirements could be met. Package: 1). Net weight of monofilament for each cone is 2kg. 2). 12 cones/paper box, 3). Approx:32kg/paper box.
3d printing filaments including pla, abs, flexible, neo pla, eco pla, x pla, esd conductive, petg.
Far Infrared Heat Mat made with carbon filament inside and Non-Woven Cloth cover which has excellent electric and thermal conductivity. It is not only excellent in far-infrared emission but also excellent in antibacterial and deodorizing capabilities, and it is already highlighted in advance countries as the most electrical energy effective heat generator.
What is ESD / Anti-static Glove Anti-Static (ESD) gloves are a remarkable blend of soft conductive and synthetic fibers. Prevent damaging static discharge with a pair of gloves that help you to continue performing at your best. The Anti-static (ESD) gloves suppress dust collecting electrostatic charges when handling delicate and sensitive static prone materials. Anti-static (ESD) gloves work continuously, discharging static harmlessly. Seamless knit construction for great dexterity, sensitivity and tactility reduces workplace fatigue. Coated palm & fingers provide superior grip, abrasion and snag resistance. Breathable back and anti-bacterial treatment promote coolness and freshness. Stretched yarn makes it lint-free. Anti-Static (ESD) gloves are ideal for technicians who frequently work inside a computer or handle static-sensitive equipment - semiconductors, computer assembly, PDP, LED, LCD, mobile phone & PCB assembly. Gloves are washable, resistant to chemicals, water and ultraviolet light for multiple usages. Anti-Static (ESD) performance can be applied to all cut resistant gloves. Sunnyglove ESD/Anti-static Gloves Made of breathable, seemless nylon knitting technique. Fitted with a PU-coating palm. Excellent fit from seemless knit construction Cleanroom class 10000 - 1000 Less hands fatigue for long time wearing Lowering lint and dust PU-coated palm for better grip Washable at 40ºC with neutral detergent Reusable, can be decontaminated Complies with CE EN 388:2003, CE EN 420:2003 Available in a wide range of sizes Sunnyglove Option: Anti-Static (ESD) Glove Type Liner Gauge Coating option EN388 EN420 Copper Nylon+Copper 13G Polyurethane (PU), Nitrile (NBR) PVC dot etc. Carbon Nylon+Carbon Chem Treated Nylon
High quality - light, "breathing" fabric, user comfort Standard cut with two side pocket, one on chest and one arm pocket Client defined cut and colour Solution for electronic producers and services Large percentage of cotton: 33% cotton, 65% polyester, 2% carbon fibres, in accordance with iec-61340-5-1 norm Multiple washing without losing conductive properties Embroidered or printed clients logo Fashionable style 3/4 unisex Standard colour: white or blue Standard sizes: from s to xxl (on request xs, xxxl or bigger) Comfortable fabric, providing many hours of comfort use Fashionable cut Washable without losing conductive properties Possible order/product modification on request while quantity orders are involved e.G.: different kinds of welts, change of cut etc. Light, "breathing" fabric, high cotton contents: 33% cotton, 65% polyester, 2% carbon fibres Resistance (compliance with iec-61340-5-1 norm): Surface: from 106 · to 107 · Through: from 106 · to 107 · Point to point: from 106 · to 107 · Pockets: two side, one chest, one on right arm Washable without losing conductive properties Esd sign and possibility of logo embroidering 0.5 kg /pc
Material : Graphite, PTFE, etc. Application : - Valve - Pump (Power plant, boiler water supply and condensate pump, etc.) - SOOT BLOWER - All other places requiring efficient sealing in the factory Feature : This braid packing adds the molybdenum-based anti-corrosion agent to the high purity flexible graphite tape at below 50ppm Chloride which is equivalent to the nuclear power level with high degree of thermal conductivity and low coefficient of the friction, and it is the multi-purpose packing designed for use of both valves and pumps as it is more endurable with the continuous filament carbon fiber inside the braid as well as the graphite inside in order to be endurable at high RPM and pressure. Therefore it is not necessary to use End Ring for prevention of extrusion. Moreover, the most optimal flexibility is guaranteed with the special braiding technology of DONGSUH ALS900G, so that the adjustment or harmonization with the shaft or stem is outstanding as the entire distribution is uniformed even if it is mounted in any shaft or stem size. No wearing or scratching of the shaft or stem can be found due to the self-lubricating function of the high purity graphite while decreasing the packing life span significantly. DONGSUH ALS900G is suitable for overall conditions in the factory such as valve and pumps, etc. Using with ALS350 Graphite Molding Packing as End Ring will get better sealing effect.
GRAPHITE PACKING BEST CHOICE FOR HIGH TEMPERATURE AND HIGH PRESSURE APPLICATIONS Graphite Packing is made of reinforced graphite. The reinforcing materials are various fibers or wires including steel wire, copper wire, nickel wire, carbon fiber, pre-oxidized wire, glass yarn and other reinforced graphite wire. Graphite packing resists all chemicals across the entire pH range (except fuming sulfuric acid, aqua regia, fuming nitric acid and fluorine). It also has great lubricity and excellent thermal conductivity. It is widely used in acid and oil production industries Its resilience makes it the perfect sealant for the fuel, chemical, and gas industries. COMMON SPECIFICATIONS Material: reinforced graphite. Reinforced material: various fibers or wires including steel wire, copper wire, nickel wire, carbon fiber, pre-oxidized wire, glass yarn and other reinforced graphite wire. PH range: 014 (Except strong oxidizers). Pressure limit in pumps: 125 psi (8.5 bar). Pressure limit in valves: 2,500 psi (172 bar). Temperature range in non-oxidizing atmospheres: -400 to 6,000 °F (-240 to 3,300 °C). Temperature range in oxidizing atmospheres: -400 to 850 °F (-240 to 454 °C). Temperature range in steam: -400 to 1,200 °F (-240 to 649 °C). Rotary speed: 25 m/s. Density: 1.25 g/cm3. FEATURES Requires less run-in. Resists many strong chemicals. Low coefficient of friction reduces shaft wear. Good thermal conductivity. Withstands elevated temperatures and aggressive chemicals. Ideal end ring (with GRAPH-LOCK center rings) in valve service. Low chloride certification available. Graphite filament reinforcement resists extrusion in high pressure applications. Convenient spool stock reduces inventory and downtime. Anti-corrosion additive reduces the chance of pitting. Withstand dramatic pressure and temperatures in valves.
Because conductive carbon filament fibers are woven along the longitude and latitude directions in the textile, anti-static fabric has permanent anti-static property besides flame retardant performance and the two functions do not interfere each other and all can reach their own functional indicators. The flame retardant property can reach the standards of EN11612 (former EN531), EN11611 (former EN470-1) and EN533 of EU; as well as NFPA2112 and ASTM of the USA. And its anti-static performance can meet the standard of EN1149. The permanent anti-static fabric produced by us is divided into two types according to the conductive wire. One is blended with stainless steel fiber and cotton and polyester cotton fiber; one is embedded anti-static cloth, which has conductive filaments added in uniformly with a certain space interval in the warp and weft directions. Using protective clothing made of such fabric can effectively avoid accumulation of charge and makes charge discharge or leak timely, so as to avoid the burning explosion accidents. This fabric is an ideal choice for petrochemical, coal, military industry, precision instruments, aerospace and other fields. The anti-static property of such fabric can reach the standards of GB12014 Anti-static Overalls, GB12703 Anti-static Fabric, EN1149-1, EN1149-3 and other standards. Anti-static clothing must wear in the flammable and explosive areas, our factory production of the anti-static fabric is blended with the anti-static fiber and cotton, polyester-cotton fiber . Its conductivity is higher than Japan's "Anti-Static Safety Guidance" requirement, its area density of charge is far low than 7uc/m2, durability, known as the "permanent" anti-static fabric
Conductive GRE pipe - Glassfibre Reinforced Epoxy Pipe length: Spool pipe: length upon client requirement Manufacturing techniques: With design set linear and thickness, filament winding control by computer and curing/carbon fiber Raw materials : Epoxy Resin/ Anhydride curing agent/fiberglass direct roving Standard: API 15HR/API 15LR/IMO A.753 Fittings: All the fittings match to equivalent pipes, with matched thread specification and pressure rating Connection: Adhesive/ taper-taper Color: Blue/original Color/ or client nominated color Application Ballast system Petroleum cargo lines Portable discharge lines Air vent and sounding system Anti Rolling & Anti Heel cross Stripping lines Deck hot air drying Advantages Keep pipeline free of accumulation of potential static electrical charges Excellent chemical resistance property, Able to withstand high pressure Higher transportation efficiency Light weight-easy to install Able to connect with steel pipe directly Lower abrasion coefficient, Smoothly inner wall, no scaling, no waxing Longer service life that is 4 to 5 times compare to steel pipe(about 20 years) Low maintenance cost
Carbon Nano Tube CNT Copper Foil Thermal Conductive Tape Descriptions: CNT Copper Foil Tape, also name Carbon Nano-tube (CNT) Copper Foil Thermal Conductive Tape, coated one layer of Nano carbon on the surface of the copper foil, coated with the not conductive acrylic adhesive on the other sided. Features: Excellent thermal conductivity. Reliable ESD ground and EMI shielding. Comparing with graphite, CNT film does not peel off during cutting process. Flexible, reusable, re-workable and cost effective. Applications: Mobile, Phone, Pad, Industrial Computer, TV, LED.
220V/110V FA-400 Solder iron Smoke Absorber,ESD Fume Extractor,Smoking Instrument,with 1pc free Activated Carbon Filter Sponge 110V also in stock Breathe easy with the FA-400 bench top smoke absorber. The FA-400 removes soldering smoke and fumes quickly, safely and efficiently. The unit can be used in a vertical (standing up) position or low-profile position (laying down.) When used in the low-profile (laying down) position, efficiency and air flow is increased by approximately 2.6 times. Unit is made of non-sloughing static dissipative conductive material and operates quietly. Standard activated carbon filter (PN: A1001) absorbs up to 80 percent of the odors from the air and is easy to replace Can be used vertically (upright) or horizontally/low profile (laying down) Uses existing 493 filters and accessories Feasures: Power Consumption:13W Absorption Capacity(w/o filter):Approx. 1.07m3;/min. (37.79 ft?3;/min.) Outer Dimensions:169(W) x 213(H) x 112.5(D) mm (5.5(W) x 3.0(H) x 7.3(D) in.) Weight:930g (2.1 lbs.) Accessories:Filter (1 pcs.) APPROVED Size:130 x 130 x10 mm(5.1 x 5.1 x 0.4 in.) Amount of Activated-Carbon filter:12 g (0.03 lb.) Max. Absorbing weight of noxious components per filter:4 g (0.01 lb.) Package Includ: 1pcs Portable Solder Smoke Absorber 10pcs Sponge 110V also in stock
Nickel foam plate is a type of porous material made from nickel metal. It consists of a three-dimensional network of interconnected nickel fibers or filaments that form a highly porous structure. The foam-like structure of nickel foam plate provides a large surface area, high porosity, and good electrical conductivity, making it useful for various applications in fields such as energy storage, catalysis, filtration, and aerospace. Product parameter Material: Nickel Aperture: 0.3mm-7mm(can customized) Porosity: 63%-90% The Max Sound Absorption Coefficient: â?¥0.8 Bulk Density: 0.27-1.08 g/cm3 Size: Customized Feature 1. Quality and light: maximum surface area, specific gravity 0.2 to 0.3, 1/10 of water, and wood, aluminum, and iron. 2. The porous construction has an extensive frequency range of sound absorption. 3. Electronic wave shield: It is protected by a 90 dB or so thick electronic wave that is rather thin. 4. Processing performance: It is easily adhered, decreased, and bent. 5. High temperature fire resistance: The stable form burns at a high temperature but is difficult to burn. 6. The ability to filter: The uniform three-dimensional network structure produces a filtering effect and permits extremely robust gas and fluid flow stability. Application 1.Nickel foam plate is a sound-absorbing material with excellent performance, which has a high sound absorption coefficient at high frequencies; the sound absorption performance at low frequencies can be improved through the design of the sound-absorbing structure. 2.Battery electrode material Nickel foam plate is the most common material used for battery electrodes, particularly for NiMH batteries. These rechargeable batteries are frequently found in hybrid cars, laptop computers, cell phones, electric scooters, and bicycles. 3. Fuel cell Foamed nickel can be used as an electrocatalyst for molten carbonate fuel cells, which typically operate at temperatures between 550 and 700 �° C. For proton exchange membrane production cells (PEMFC), electrode relay feeders for solid oxide fuel cells (SOFC), and electrode materials for electrolysis (as in water electrolytic settings), nickel foam plate can be utilized. Additionally, more surface area can be employed to produce syngas and hydrogen for fuel cells. 4. Other applications Magnetic flux conductors of magnetic particles in a fluid can be treated using nickel foam plate as a filter material. Applications to heat exchange medium and hydrogen storage media are among the further uses.
