Concealed Rack & Pinion Door Closer with adjustable value EN 2-4
Fully hydraulically controlled adjustable closing speed in two independent ranges
1. Power adjustable with back check
2. Non handed design
3. With track arm
4. With back check adjustable between 70-120 degrees
5. Tested to EN 1154
6. Maximum door weight-up to 100Kg.
7. Maximum door width-1100mm
8. Minimum door thickness for installation-50mm
9. Fire tested and certified by Warrington APT Laboratories, UK
Test certificate available on request
Finish: Silver
4800 Conceal Door Closer
1.Suitable for timber door with 35mm-thickness or metal door with min.31mm-thickness 2.Complying with EN1154 ,Durability test to 500,000cycle
3.Extrused aluminum body,harden Anodized treatment
4.Body Dimension:L340mmX W32mm XH45mm
5.Fixed Closoing Strength:EN2-4
6.Max.Opening Angle:180 degree
7.Operation Temperature:-45 to 80
8.Finishedï¼?silver,Gold,etc.
4800 Conceal Door Closer
1.Suitable for timber door with 35mm-thickness or metal door with min.31mm-thickness 2.Complying with EN1154 ,Durability test to 500,000cycle
3.Extrused aluminum body,harden Anodized treatment
4.Body Dimension:L340mmX W32mm XH45mm
5.Fixed Closoing Strength:EN2-4
6.Max.Opening Angle:180 degree
7.Operation Temperature:-45 to 80
8.Finishedï¼?silver,Gold,etc.
4800 Conceal Door Closer
1.Suitable for timber door with 35mm-thickness or metal door with min.31mm-thickness 2.Complying with EN1154 ,Durability test to 500,000cycle
3.Extrused aluminum body,harden Anodized treatment
4.Body Dimension:L340mmX W32mm XH45mm
5.Fixed Closoing Strength:EN2-4
6.Max.Opening Angle:180 degree
7.Operation Temperature:-45 to 80
8.Finishedï¼?silver,Gold,etc.
Comply with EN1154 Standard.
Selectable power size 2 to5 according to EN 1154.
Adjustable closing and latching speed.
Constructed with extruded anodized aluminum body and high quality steel internal components.
None of components in a concealed door closer is visible when the door is closed.
Non-handed installation.
Cushioned stopper enable the door to be held.
39310 Conceal Door Closer Suppliers
Short on time? Let Conceal Door Closer sellers contact you.
1.Select the high quality steel for transmission parts.The usage cycle of Germany oil seal is over half a million times.
2.General design is suitable for opening doors with left/right hand and single/double opening.
3.Filled with high quality anti-icing hydraulic oil,ensuring that closing speed won't be affected at minus 20 degrees.
4.Can adjust 5mm all around in the metal box,and adjust ± 2 ° in longitudinal direction during zero calibration,making installation easier.
5.Applicable for all public wooden doors.
Key Features
1.Iron casting body,adjustable capacity, door weighting up to maximum 150kg
2.Fully hydraulic control with maximum opening angle 105°
3.Two completely independent adjustable valves to control swing speed from 90° to 25°, latching speed from 25° to 0° which make the adjustment become precise and easy
4.Unique design for adjustable valves prevents the valves from not being driven out of closer to avoid leakage possibility
5.These floor springs are available in 90° Hold Open and Non Hold Open models.
6.This fully adjustable floor spring meets ADA requirements in that it can be set at 5 or 8.5 pound opening forces.
7.Three years warranty and tested 500,000 cycles
Specification
Model NO. SG-183
Speed Control Two adjustable Speeds
Closing Speed Adjustment Speed 1 for 0°-25°
Speed 2 for 25°-90°
Applicable Door Width 1150mm/1300mm
Applicable Door Weight 100kg/150kg
Logo Customized
Maximum Open Angel 105°
Bearing Chrome steel
Oil Material low temperature hydraulic fluid
Application Temperature -40°C to 40°C
Material cast iron
Color Black (Standard),also can be Customized
Features 500,000cycles tested
90°Hold-Open Angel yes
Available for Shopping mall, house,hotel, conference, office
Production Capacity 30,000pcs/month
Sample Time 3-7 days
Delivery Date 30 days after receiving deposit
Warranty 2 years
Standard CE
Fully hydraulically controlled adjustable closing speed in two independent ranges
1. Non handed design
2. With track arm
3. Maximum door weight-60Kg.
4. Maximum door width-950mm
5. Minimum door thickness for installation-35mm
6. Fire tested and certified by Warrington APT Laboratories, UK
7. Test certificate available on request
Selectable Closing Force
Adjustable Closing & Latching Speeds
Non-Handed Installation
Universal Application
With Regular-Stamping HO Arm
Features & Application
Comply with EN1154 Standard, over 500,000 cycle test.
Selectable power size 2 to 4 according to EN 1154.
Adjustable closing and latching speed.
Non-handed for standard, top jamb or parallel arm installation.
Universal application.
Available with regular, hold-open or sliding arms.
Hold-open arms can be adjusted for stop angle.
Body size : 207L x 55W x 40H
Further product features:
* Comply with EN1154 Standard, over 500,000 cycle test.
* Selectable power size 2 to 4 according to EN 1154.
* Adjustable closing and latching speed.
* Non-handed for standard, top jamb or parallel arm installation.
* Universal application.
* Available with regular, hold-open or sliding arms.
* Built in Hold-open function (optional): Open door to 80 degree, the door will remain open unless it is pushed to close again.
Features & Application
Comply with EN1154 Standard.
Selectable power size 2 to 4 according to EN 1154.
Adjustable closing and latching speed.
Constructed with M-shape anodized aluminum body and high quality steel internal components.
Non-handed installation.
Cushioned stopper enable the door to be held under 110óX.
Arm Type
ES Standard Arm European-Stamping Arm
EF European-Forging Arm
RS Regular-Stamping Arm
RF Regular-Forging Arm
ESHO Hold-open Arm European-Stamping HO Arm
EFHO European-Forging HO Arm
RSHO Regular-Stamping HO Arm
RFHO Regular-Forging HO Arm
WS Sliding Arm Wide Sliding Arm
TS Thin Sliding Arm
WC Concealed Arm Wide Concealed Arm
TC Thin Concealed Arm
