We are supplier and exporter of Petroleum Coke. Petroleum Coke are made from a mixing material of serval kinds of coal,under a high temperature(1300) process.They are widely used for steelmaking,ferroalloys manufacture or non-ferrous metals smelting,iron castings manufacture or other related metallurgical and foundry industry,because of its special physical and chemical characteristics:high strength and fixed carbon content,low sulfur and low volatile matter content.
Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate. Item HQ-SGPC-01 Fixed carbon Sulphur 98.5% min. 0.1% max. Ash 0.7% max. Volatile matter Moisture Size(mm) HQ-SGPC-02 98.5% min. 0.2% max. 0.7% max. HQ-SGPC-03 98.5% min. 0.3% max. 0.7% max. HQ-SGPC-04 98% min. 0.5% max. 1% max. HQ-SGPC-05 98% min. 0.8% max. 1% max. 0.8% max. 0.5% max. 0.8% max. 0.5% max. Graphite Electrode Scrap(GES) Item Fixed carbon Sulphur Ash HQ-CPC-01 98.5% min. 0.5% max. 0.7% max. HQ-CPC-02 98.5% min. 0.8% max. 0.7% max. HQ-C PC -03 98.5% min. 1% max. 0.5% max. HQ-CPC-04 98.5% min. 2% max. 0.5% max. HQ-CPC-05 98.5% min. 3% max. 0.5% max. Size(mm) 1-3/1-5 1-5/30-60 1-3/5-20 1-5 0-2 Item Fixed carbon Sulphur Ash Volatile matter Moisture Size (mm) HQ-GES-01 99% min. 0.03%max. 0.5% max. 0.5% max. 0.5%max. 1-5 HQ-GES-02 98.5% min. 0.05%max. 0.7% max. 0.8% max. 0.5%max. 0.2-1 * Other sizes and specifications are available,please enquire - HENGQIAOCARBON 1% max. 1% max. 0.5% max. 0.5% max. 0.8% max. 0.5% max. 1-5 3-8 1-5 1-5 1-5 Green petroleum coke 144 shaft kiln for petcoke calcined 1% max. 0.5% max. Crush Sieving Packing Volatile matter Moisture 0.8% max. 0.5% max. 0.8% max. 0.5% max. 1% max. 0.5% max. 1% max. 0.5% max.
High-quality green petroleum coke is taken into Acheson furnace for graphitization process with temperature around 2500-3600 �°C.The product has higher degree of graphitization with nitrogen content is lower than 300ppm.This product, with lower sulpur and ash content, is ideal recarburizer for steelmaking and foundry industries. Fixed carbon 99% min. Sulphur 0.03% max. Ash 0.5% max. 0.7% max. 1% max. 1% max. Volatile matter 0.5% max. 0.8% max. 1% max. 1% max. Moisture 0.5% max. 0.5% max. 0.5% max. 0.5% max. Size(mm) 1-3/1-5 1-5/5-10 0.2-1 0-0.5 2 HQ-GPC-02 98.5% min. 0.05% max. HQ-GPC-03 98% min. 0.07% max. HQ-GPC-04 98% min. 0.1% max. ä¸? è??楺碳表 HENGGIAO CARBON Semi-graphite Petroleum Coke(SGPC) Semi GPC is from the insulation layer of acheson furnace. The graphitization temperature is in the range of 1700-2500 C.It belongs to the medium temperature graphitization product. It is economical recarburizer with high fixed carbon, lower sulphur content, fast dissolution rate and high absorption rate.
Calcined petroleum coke is solid petroleum coke product with black and dark gray color,shine with metallic luster,porosity and composed with micro-graphite crystals.It is the carbon material in the form of granular,columnar and acicular. Type Fixed carbon(Min) Ash(Max) Volatile Matter(Max) Moisture(Max) Sulfur content(Max) Nitrogen content(Max) Calcined petroleum coke 98.5% 0.50% 0.50% 0.50% 0.5% 300ppmSize:1-5mm,1-3mm,or as customer request. Application: 1,Calcined Petroleum Coke can be widely used for producing Anode Paste and Prebaked Carbon Anode for electrolytic Aluminium,application as additive in graphite electrode and carbon raiser production,also used as fuel for silicon. 2,Used as basic raw material for carbon additive and foaming agent. 3,Used in chemical industry as the basic source of sodium hydride and high
PETROLEUM COKE Maximum Quantity: 50,000MT per Month CIF Price: USD $200.00MT/USD $190.00 NET on CIF TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Petcoke, also known as petroleum coke, is a carbon-rich solid material that is produced during the refining of crude oil. The specifications of petcoke can vary depending on the type and source of crude oil, as well as the processing method used to produce it. However, here are some of the general specifications for petcoke: - Carbon content: Typically ranges from 85% to 95% - Sulfur content: Can range from less than 1% to over 7% - Moisture content: Typically less than 5% - Ash content: Can range from less than 1% to over 10% - Volatile matter: Can range from less than 5% to over 20% - Size: Can range from a fine powder to large chunks Petcoke is primarily used as a fuel source in industrial processes, such as cement manufacturing, power generation, and steel production. It is a cheaper alternative to coal, and its high carbon content makes it an effective fuel for energy-intensive processes. However, its high sulfur content can contribute to air pollution and acid rain, so it is often subject to emissions regulations. Petcoke is also used in the production of anodes for the aluminum smelting industry, as well as in the production of graphite electrodes for the steel industry. In addition, it is sometimes used as a source of carbon in the production of certain chemicals and materials.
Petroalliance is a professional supplier for all kinds of coke products. Such as Semi coke, metallurgical coke, Foundry coke, Petroleum coke , Pitch coke and so on. We can provide different quality products according to the needs of our customers. We are trying to deliver a superme service for our customers including any packing orders, transportation and technical support. The company has get the dangerous chemicals business license and ISO 9001 certificate. Our product, service and manufacture have been kept high quality, good performance and environmental friendly all the time. We would have put lots of efforts on high quality products and services to keep a good relationship with our customers.
Petroalliance is a professional supplier for all kinds of coke products. Such as Semi coke, metallurgical coke, Foundry coke, Petroleum coke , Pitch coke and so on. We can provide different quality products according to the needs of our customers. We are trying to deliver a superme service for our customers including any packing orders, transportation and technical support. The company has get the dangerous chemicals business license and ISO 9001 certificate. Our product, service and manufacture have been kept high quality, good performance and environmental friendly all the time. We would have put lots of efforts on high quality products and services to keep a good relationship with our customers.
Petcoke, coque de petroleo
Blast-furnace coke fraction 25-60-90mm. Coke nut fraction of 10-25mm. Coke fines fraction 0-10mm. In bulk
FOUNDRY COKE Ash(max)/% 8-12 V.M.(max)/% 1.2-1.5 F.C.(min)/% 86-90 Sulfur(max)/% 8-12 Moi(max)/% 6-8 Size 60-90 80-120 90-150 150-300 METALLURGICAL COKE Ash(max)/% 13-14 V.M.(max)/% 1.5-1.8 F.C.(min)/% 83-85 Sulfur(max)/% 0.75-0.8 Moi(max)/% 10 Size 10-30 20-40 ect HIGH SULFUR FOUNDRY COKE Ash(max)/% 14-16 V.M.(max)/% 1.5-1.6 F.C.(min)/% 80-85 Sulfur(max)/% 2-2.5 Moi(max)/% 6-8 Size 30-80 60-90 SEMI COKE Ash(max)/% 7-10 V.M.(max)/% 7-8 F.C.(min)/% 83-85 Sulfur(max)/% 035 Moi(max)/% 15 Size 8-18 18-35 30-60 GRAPHITE COKE PARTICLES Ash(max)/% 7-10 V.M.(max)/% 7-8 F.C.(min)/% 83-85 Sulfur(max)/% 0.35 Moi(max)/% 15 Size 8-18 18-35 30-60 CALCINED COKE PARTICLES Ash(max)/% 0.5 V.M.(max)/% 0.5 F.C.(min)/% 98.5 Sulfur(max)/% 0.5 Moi(max)/% 0.5 Size 1-5 CARBON ADDITIVE Ash(max)/% 3-18 V.M.(max)/% 1 F.C.(min)/% 80-95 Sulfur(max)/% 0.3-0.35 Moi(max)/% 0.5 Size 1-5 To provide a price, indicate the brand of coke material, the volume and terms of delivery. *We are producer.
ORIGIN - RUSSIA MOQ 50.000 MT PER SHIPMENT MAXIMUM QUANTITY - 200,000 MT PER SHIPMENT PACKING BULK CIF PRICE 92 USD GROSS PER MT PAYMENT TERMS - 1. SWIFT MT710 VIA USANCE LC 2.SWIFT MT199 FOLLOW BY SWIFT MT760 SBLC 3.SWIFT MT103 TT 2% PB
Petroleum coke (petcoke) is a byproduct of the oil refining process. As refineries worldwide seek to operate more efficiently and extract more gasoline and other high value fuels from each barrel of crude oil, a solid carbon material known as petcoke is produced. We work with the rafineries, we have differents specs, contact us for our service.