Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Coal Based Carbon - Powder
Powdered Activated Carbon Powdered activated carbon (PAC) is a fine black powder that is produced by heating carbon-rich materials, such as coal, wood, or coconut shells, in the absence of air to create activated carbon. PAC is widely used in various applications, including water treatment, air purification, gas processing, and industrial processes. In water treatment, PAC is added to the water to remove organic contaminants, such as pesticides, solvents, and pharmaceuticals, as well as taste and odor-causing compounds. The PAC particles attract and adsorb these contaminants, effectively removing them from the water. PAC is also used in wastewater treatment to remove dissolved organic compounds and color from the wastewater. In air purification, PAC is used to remove pollutants, such as volatile organic compounds (VOCs), from the air. The PAC particles adsorb these pollutants, effectively reducing their concentration in the air.
1)Bituminous Coal Granular Activated Carbon Products are available in the following mesh sizes (specialised particle distributions are also available on request). Particle Size Lodine Number Moisture Content Ash Content Hardness Apparent Density Methyl Blue Floating rate 4x8, 6x12, 8x16, 8x18, 8x30, 10x20, 12x35, 12x40 850-1050 (mg/g)
Coal powder activated carbon with coal columnar activated carbon as the selection of high quality anthracite as raw materials, the use of advanced production equipment and process refined processing. The physical properties of coal powder activated carbon: Black amorphous granular or fine powder, no smell, no smell, no sand, not soluble in any solvent. Selective adsorption capacity of various gases, organic pigment and nitrogen base have high capacity of adsorption capacity. Coal powder activated carbon chemical characteristics: coal powder activated carbon not only carbon, but also contains a small amount of chemical combination, such as carbonyl, phenols, ethers, ether. On the surface of these oxides and complex, some derivatives from raw materials, some are activated, after cremation and by air or water vapour generated. In the activation process, some of the raw materials contained in the activation of activated carbon to become ash, ash is the main component of alkali metal and alkali metal salts, such as carbonate and phosphate, etc.. Contact: Ms.Ella Cell phone:0086-18231421837 QQ:3195095761
Powder Activated Carbon Introduction: Powder activated carbon is made of high quality wood chips, which has large adsorption capacity and fast filtering characteristics. Mainly used in all kinds of amino acid or water industry, refined sugar decolorization, monosodium glutamate industry, glucose industry, starch sugar industry, chemical fertilizer, dyes intermediates,and food additives.
We offer Bulk Coal Based Activated Carbon Powder for High Pigment Solution Suga. Powder activated carbon Description: It has good adsorption, can be used in: 1.air purification etc for more information contact
We offer Bulk Coal Based Activated Carbon Powder for High Pigment Solution Suga. Powder activated carbon Description: It has good adsorption, can be used in: 1.air purification etc for more info contact at
High quality coal based activated carbon uses high-quality anthracite as raw material, and is developed through a series of processes such as carbonization, cooling, activation, and washing. Its appearance is divided into black cylindrical shape according to the shape of coal based columnar activated carbon; amorphous coal-based granular activated carbon, also known as coal-based broken activated carbon; black fine powder called coal powdered activated carbon. ã??ã??The high-quality coal-based columnar activated carbon is made of coal-based powdered raw materials and binders through kneading, extrusion molding, carbonization and activation. Coal columnar activated carbon has a developed pore structure, good adsorption performance, high mechanical strength, easy regeneration, low cost, etc.; widely used in the purification of toxic gases, waste gas treatment, industrial and domestic water purification, solvent recovery, etc. .Specifications Model: 1.5mm 3.0mm 4.0mm 6.0mm 8.0mm 10.0mm Other specifications can be adjusted with user needs. ã??ã??High quality coal based granular activated carbon is a black porous solid carbonaceous material. In the early stage, it was obtained by carbonization and activation of wood, hard husk or animal bone, and then converted to coal by crushing, molding or even carbonization and activation with uniform coal particles. The main organic component is carbon, and contains a small amount of oxygen, hydrogen, sulfur, nitrogen, chlorine and other elements. The specific surface area of common activated carbon is between 500 and 1700 m2/g. Has a strong adsorption performance, is an extremely versatile industrial adsorbent.Coal-based granular activated carbon particle size is divided into 1.0, 1.5, 2.0, 3.0, 4.0. Other indicators can be adjusted with user needs. https://www.alibaba.com/product-detail/High-quality-Coal-Based-Granular-Powder_60727486036.html?spm=a2700.7724838.2017115.442.43424e3dOqINF6 ã??ã??High-quality coal-based powdered activated carbon is made from high-quality anthracite as a raw material and refined by steam process. It is black powder, odorless and odorless, and does not dissolve in general solvents. In addition to carbon, the main components of coal powdered activated carbon include oxygen and hydrogen. The coal-based powdered activated carbon has an extremely fast adsorption rate and has a flocculation effect and a filtering effect. It is suitable for the decolorization of sugars such as glucose, sucrose, maltose, etc., as well as the removal, purification and refining of macromolecular pigments in citric acid, cystinic acid, oils and chemical products.Coal based powder activated carbon commonly used specifications: 80 mesh, 120 mesh, 200 mesh, 325 mesh ... other specifications can be produced with the needs of users.
Coal based activated carbon originates from coal that has undergone a steam activation process Coal based carbon has mainly mesopores and macropores and is very popular in gas phase purification portable water purification wastewater purification and aquariumpond water purification applications The carbonaceous product of wood Applications Gas phase purification Water purification system
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This highcarbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future. Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dust a testament to our unwavering dedication to environmental responsibility and innovation
Welcome to Gremlog Trading DMCC, where we lead the charge in sustainable solutions and innovation. Our premier offering, carbon dust, is a by-product of aluminium smelting that underscores our commitment to environmental responsibility.As the primary supplier for carbon dust production, Gremlog Trading DMCC spearheads this groundbreaking initiative. This high carbon-content by-product, derived during the production of anodes for aluminium smelting, serves as a remarkable alternative fuel for the cement industry. The utilization of 78,000 tonnes of carbon dust has translated into savings of approximately 36,000 tonnes of CO2 emissions, signifying a substantial reduction in dependence on traditional fuels and a meaningful stride towards a more environmentaly responsible future.Going beyond the supply chain, Gremlog Trading DMCC actively engages in the processing and re-use of stockpiled carbon dust. This approach ensures that previously generated material plays a pivotal role in advancing the circular economy. We invite you to join us in shaping a greener future with our premium carbon dustâ??a testament to our unwavering dedication to environmental responsibility and innovation
- Total Moisture : 2,15% - Ash Content : 2.33% - Volatile Matter : 42,60% - Fixed Carbon : 52,92% - Gross Caloric Value : 7712-7791 Kcal/Kg - Sulfur : 0,71%
We are the leading manufacturer, supplier and exporter of coal activated carbon from China. With our experience in activated carbon production and technology and Chinaâ??s abundant raw material resources, we provide high-quality activated carbon at competitive prices. We can provide three types of coal based activated carbon ( granular, pellet and powder type).
Steam coals range Gar 5000 to Gar 6500 available from various mines in Kalimantan and Sumatra. Price are based on prevailing ICI rates.
Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder. Mb Value : 140 to 320 Ash:7 to 12%
Coconut shell activated carbon is derived from coconut shells. It has a very high hardness and is more abrasion resistant than any other type. It is a totally natural, environmentally friendly product that has a very small carbon foot print. The carbonaceous product of coconut. Applications â?? Portable water purification Wastewater purification Gold absorption from gold solution Medical use
It used in the field of gas phaseadsorption, recovery of organic solvents such as alcohol, ester, hydrocarbonand aromatic. It used for airfiltration, purification and removal of harmful gases. Mainly used for air purifier,gas mask, operating room, chemical medicine workshop, purification of hotelrooms and organic solvent recovery. Widely used in thepurification and deodorization for the drinking water, in the further (deep)treatment to the toxicity, COD, BOD, Cdonbacillus, etc for the industrialwastewater and municipal wastewater, in the ultra water purification for theelectronic & pharmaceutical industries. Coal granular activated carbon, specifications (4x8 mesh, 5x10 mesh, 8x16 mesh, 8x30 mesh, 12x40 mesh,30x60mesh) Powder 200-325 mesh Main index : iodine value :600-1000mg/g; Moisture: less than 10%; Strength: more than 95%. Chengde JisenCarbon Industry Company has an ISO 9001 certificate. We only do the activatedcarbons which are 100% according to the specifications or customers' detailrequest. As for packaging, generally it is 25 KG PP BAGS or 500 KG PP BAGS.
Carbon Dust is a high-quality powder with a purity of 100%. It is designed in a powder form, making it easy to use and handle. The product does not float, ensuring easy application and minimal waste. The fine powder appearance makes it suitable for various industrial and commercial applications. As a trusted supplier and trader, we ensure that Carbon Dust meets the highest standards of quality and consistency, making it a reliable choice for your specific needs. Whether its for environmental remediation, filtration, or any other application, our Carbon Dust is the ideal solution for your requirements. Moisture Content 2.60% Ash Content 38% Volatile Matter 6.76% Fixed Carbon Content 48% Total Sulphur 0.10% GCV 4072 kcal/kg
