There are different kinds of ceramic shaft and rods. They are high strength, heat-resistantance, wearable, unattackable, insulating in high-temperature, and used in power station pump, aquatic animals equipment and different kinds of stepping motor and so on. Used for application such as DC fan, CPU cooling fan, high speed mechanism, navigation, low temperature engineering, etc. It is featured by lubrication, wear resistance, low noise, convenient assembly, long life span, low return loss, and impact resistance, etc.
99.7% Alumina ceramic tube/high frequency ceramic is our main product. We are making High quality alumina furnace tubes. 99.7% alumina is the main material, 85% and 95% alumina tubes also available. Other material like Mullite, Zirconia, Silicon Carbide, Silicon Nitride bonded Silicon Carbide is also available. Features of Alumina Furnace tube 1. High quality 99.7% alumina tubes 2. Diameter from 25mm to 120mm,Length from 100mm to 2000mm 3. Max working temperature 1800 4 . Out surface can be grinded drilling hole to make tight tolerance and right instillation. 5. Large quantity in stock makes fast delivery and competitive prices.
(ISO 9001 approved factory!) 60-99.7 alumina ceramic insulation tube (different size and length available) Professional manufacturer of ceramic tube here for about 10 years, has exported to About 30 countries, good reputation has gotten, welcome to contact me for further info. 1.Thermocouple protection alumina ceramic tube are made of al203 , and alumina Content from 60-99.7%, length can do according to your demand. Od from 6-32mm, id from 4-30mm. 2.Alumina ceramic furnace tube, both end open, white, creamy, pink color.Od 8-110mm, Length can do as your requirement. 3.Alumina ceramic insulation tube , .2 or 4 holes, size do as your request. Hot selling kinds Are in stock. Polyfoam filled , wooden case outside
We are factory of alumina ceramic tubes and tiles, and welcome to come and visit us. 1, alumina tube feature: 1, excellent wear-resistantce 2, long service life. 3, high purity 4, iso9001 certification 2, physical characteristics : Al2o3(%) 92-96.5 , 98.2-99.5, Bulk density(g/cm3) = 3.65-3.86 Resistivity(o/cm)100°c > 1015-1016 Compressive strength(mpa) = 500-620 , Flexural strength(mpa) = 510-610 Max working temperature(°c) = 1600-1700 3, features: Wear resistant alumina ceramic tube is typed by cip , which has excellent conductivity, high machinery strength and high-temperature resistance.Alumina ceramic tubes can resist to the acid, high temperature, corridion and static electricity. We can produce the almina tube with different sizes according to the customers’ enquirements. 4, applications: Alumina ceramic tube/lining Various acid and high temperature resistant tiles and plates/sheets can be lined inside towers, pots, reactors, ponds, pond grounding and ditches for chemical industry, metallurgy industry and coal-fired power stations. Wear-resistant linings can be used for the pneumatic conveying of powdered and grained materials, dust collection conveying and belt conveying where their good abrasion-resistant property will play important roles. Various hard materials. Alumina ceramic tubes are mainly used as lining materials of conveying equipment for materials like coal, cement and mining ores. They are specially suitable for applications like coal conveying in power stations, slag conveying pipelines, material conveying for mines and docks, cement powder selecting equipment and crushing equipment for fine ceramic materials. They are featured as high wear-resistant and easy for installation.
Application: Precision dimensions, strict tolerances,high hardness, excellent wear and heat resistance enable ceramic to be widely used in equipment and machinery industry. Gradually,ceramic shows a trend of replacing traditional and metal parts in special appilications. In addition to produce commody used ceramic parts in equipment and machinery industry,we cna also develop customized formula to produce ceramic parts that meet customers' special needs Type: Ceramic Tubes. Material 99%-99.8% Al2O3 Ceramic. Available Color: White,Ivory. Feature: High Temperature Resistance,Insulation Performance,High Wear-resistance,High temperature-resistance. Size: Size Customized,according to customer's drawing,according your drawing,OEM. Density: 3.65 - 3.90 g/cm3, Raw material: Germany,China,Japan,al2O3. Item Engineering ceramic tubes,Industrial alumina ceramicsAlumina ceramic parts. Advantage Long Service Life,10 more Years Structural Ceramics Experience,Super Wear Resistant,Fast Delivery Date. Package: Carton+Palletize,Carton,bubble paper inside,Wooden Box. Name Grinding machining Ceramic products, Alumina ceramic plates. Tolerance �0.05mm,can be polished,as customer's drawing,as design drawing or OEM. Alumina content 99%-99.8% Surface: Polishing Finish,Smooth or Glazed will be applied.
Application: Precision dimensions, strict tolerances,high hardness, excellent wear and heat resistance enable ceramic to be widely used in equipment and machinery industry. Gradually,ceramic shows a trend of replacing traditional and metal parts in special appilications. In addition to produce commody used ceramic parts in equipment and machinery industry,we cna also develop customized formula to produce ceramic parts that meet customers' special needs Type: Ceramic Tubes. Materialï¼? 99%-99.8% Al2O3 Ceramic. Available Color: White,Ivory. Feature: High Temperature Resistance,Insulation Performance,High Wear-resistance,High temperature-resistance. Size: Size Customized,according to customer's drawing,according your drawing,OEM. Density: 3.65 - 3.90 g/cm3, Raw material: Germany,China,Japan,al2O3. Itemï¼? Engineering ceramic tubes,Industrial alumina ceramicsï¼?Alumina ceramic parts. Advantageï¼? Long Service Life,10 more Years Structural Ceramics Experience,Super Wear Resistant,Fast Delivery Date. Package: Carton+Palletize,Carton,bubble paper inside,Wooden Box. Nameï¼? Grinding machining Ceramic products, Alumina ceramic plates. Toleranceï¼? ±0.05mm,can be polished,as customer's drawing,as design drawing or OEM. Alumina contentï¼? 99%-99.8% Surface: Polishing Finish,Smooth or Glazed will be applied.
1.Quick Details 1Place of Origin:Fujian, China (Mainland) 2Type:Ceramic Parts 3Application:Industrial Ceramic 4Material:Alumina Ceramic, 92%,94%,96%,99% alumina 5Model Number:INC 6Brand Name:INNOVACERA 7Color:White/Ivory 8Density:3.8g/cm3 9Compressive strength:2500 10Flexural Strength:358Mpa 11Vickers Hardness:11-14 Gpa 12Maximum Use Temperature:1650°C 13Bulk density:3.1 14Thermal Conductivity:24.7 15Thermal Shock Resistance:200-250 TC 2.Appications Aluminum ceramics are widely used in electronics and electrical engineering, metallurgical processes, chemical technologies, medical technologies, mechanical engineering, military equipment. Aluminum ceramics are used for manufacturing insulators, capacitors, resistors, furnace tubes, sealing refractory parts, foundry shapes, wear pads, thermocouple protection tubes, cutting tools and polishing/grinding powders, ballistic armor, laboratory equipment, bio-ceramic parts for orthopedic and dental surgery, bearings. 3.We are a supplier of precision ceramics. All products can be customized according to customer requirements. my mail address isvivian@innovacera.com If you want to know more products, please feel free to contact me.
BrandKOHS TypeRound Bushing Tube Material99%Alumina Ceramic ColorIvory DimensionsOutside Diameter7.95mm Inside Diameter4.78mm Wall Thickness3.17mm Length2500mm Long-term Operating Temperature1600oC or 2912 °F Tolerance±0.3mm Package Bubble Wrap + EPS + Carton + Wooden Box
Product description Ceramic tube made of 95% alumina is used as lining of hydraulic cyclone for paper making and mineral separation.And most of the textile ceramic components are made of 95% alumina. Most of the ceramic spools, structural ceramic components and ceramics for military application are made of 99% alumina. Product feature Excellent wear resistance High temperature resistance Corrosion resistance Chemical resistance Etc.Properties. Product specification/models Standard dimension(mm) Alumina ceramic tubes(isostatic processing)can be supplied in longer lengths(up to 1250mm long).We can custom cut shorter lengths to your specifications. The tube's outer diameter range from 10mm-800mm. Application Ceramic tube is widely used in industry of mining, power, metallurgical, coal, chemical and so on.It works as lining in pipe for transport of power material and corrosive material, such as sand, ash, slag.In some special parts where wear plates can not service well, ceramic tube is a perfect substitute, it enjoys high reputation of solving the wear plate dropping problem. Other information In addition, timely delivery, stocks and product information are available. Should you have any questions, pls do not hesitate to contact me. Free samples will be sent for your evaluation! Note:if we have available stocks for your sizes, free samples can be sent to you but you bear the freight. If your sample is custom-made, you should pay for both the sample fee and freight.
The aluminum titanate has higher melting point,lower thermal expansion coefficient and excellent heat-shock resistance .Besides,the aluminum titanate don't infiltrate with the metal melt(especially the non-ferrous metals) and glass melt.Therefore aluminum titanate can be widely used in the conditions of high-temperature resistance,heat-shock resistance and corrision resistance. The aluminum titanate riser tube is the key part of the low pressure aluminum casting machine,the features are as following: 1,Excellent thermal shock resistance 2,No infiltration with the non-ferrous metal 3,Excellent wear resistance 4,Low thermal-expansion coefficient 5,The service life of the aluminum titanate riser tube can reach 60 days , can enhance the production efficiency and reduce the cost. 6,Isostatic Forming 7,Exact dimensions machined by CNC
KOHS CERAMICS, which is a professional manufacturer of advanced ceramics with 19 years of R&D experience.we can custom various textile ceramics,alumina ceramic tubes,crucible and so on.If you are interested pls contact
99.7% Alumina ceramic tube/high frequency ceramic is our main product. We are making High quality alumina furnace tubes. 99.7% alumina is the main material, 85% and 95% alumina tubes also available. Other material like Mullite, Zirconia, Silicon Carbide, Silicon Nitride bonded Silicon Carbide is also available. Features of Alumina Furnace tube 1. High quality 99.7% alumina tubes 2. Diameter from 25mm to 120mm,Length from 100mm to 2000mm 3. Max working temperature 1800 4 . Out surface can be grinded drilling hole to make tight tolerance and right instillation. 5. Large quantity in stock makes fast delivery and competitive prices.
Alumina ceramic tube is made of 95% high purity alumina ceramic material.According to customer requirements, we can provide different high-purity alumina ceramic tubes, such as: Alumina ceramic(Al2O3):95%;96%;97%;98%;99%;99.5%:99.7%;99.9%...etc. High heat and temperature resistant for alumina ceramic tubes The High heat temperature alumina tube have a excellent high heat temperature resistant ability. High heat temperature alumina tube can be used under 1800â?? high temperature environment.Coefficient of thermal expansion up to 9* 10â?§6 from 20�°C- 1000�°C. up to 2050�°C Melting point. Corrosion resistant for alumina tubes Corrosion alumina tube material has excellent chemical stability under high temperature, it is not easy to oxidize, and Corrosion alumina tube has good corrosion resistance to acid, alkali and salt.
KOHS CERAMICS, which is a professional manufacturer of advanced ceramics with 19 years of R&D experience.we can custom various textile ceramics,alumina ceramic tubes,crucible and so on.If you are interested pls contact
Alumina 99.7% (alsint c997, ker 710) and silicon carbide (recrystallized sic, nitride bonded sic and reaction bonded sic) protection sheath, insulator and parts. Wooden case and pallet
Alumina / Al2O3 is an excellent electrical insulator and one of the most widely used advanced ceramic materials. Additionally, it is extremely resistant to wear and corrosion. Alumina components are used in a wide range of applications such as electronics, pump components and automotive sensors. UNIPRETEC offers a variety of alumina compositions, including 92% Alumina, 95% Alumina, 96% Alumina, 99% Alumina, 99.5% Alumina and 99.8% Alumina. Boron Nitride / BN machinable ceramic is made by hot pressing Boron Nitride powders at high temperature and pressure. UNIPRETEC's Boron Nitride (BN) can easily be machined into rods, bars, plates and even intricate custom shapes.The unique combination of highly exceptional thermal, physical and chemical characteristics of BN Boron Nitride ceramic makes it ideal for solving tough challenges in a wide range of industrial applications. Silicon carbide / SiC, exceedingly hard, synthetically produced crystalline compound of silicon and carbon. Its chemical formula is SiC. Since the late 19th century silicon carbide has been an important material for sandpapers, grinding wheels, and cutting tools. More recently, it has found application in refractory linings and heating elements for industrial furnaces, in wear-resistant parts for pumps and rocket engines, and in semiconducting substrates for light-emitting diodes. Silicon Nitride / Si3N4 is a high performance ceramic that is extremely hard and has exceptional thermal shock and impact resistance. It surpasses most metals high temperature capabilities and has a superior combination of creep and oxidation resistance. Additionally, its low thermal conductivity and high wear resistance make it an excellent material that can withstand the toughest of conditions in the most demanding industrial applications.
The long-term practical use proves that SG-28 Silicon Nitride Ceramic is very suitable for low-pressure casting machines and dosing furnaces. Compared with traditional cast iron, silicon carbide, carbon nitrogen materials and Aluminum Titanate, Silicon Nitride Ceramics have the best high-temperature strength and the service life can last for more than one year. The low wettability to aluminum liquid, makes the SG-28 Silicon Nitride Ceramic effectively reduce the slagging on the inner and outer walls of the riser tube, reduce the shutdown loss and maintenance. SG-28 Silicon Nitride Ceramic has excellent corrosion resistance, which can effectively reduce the pollution to the aluminum liquid, and improves casting quality.
Mainly product:alumina 99.7% (alsint c997, ker 710) and silicon carbide (recrystallized sic, nitride bonded sic and reaction bonded sic) protection sheath, insulator and parts.
Product description Zirconia ceramic thermocouple-protection tubes are considered to have better mechanical strength and better chemical resistance, also have excellent abrasion resistance. Zirconia ceramic thermocouple-protection tubes are considered to be gas tight so they make excellent primary protection tubes. Product specification/models Standard dimension(mm) Od-id-length:12.7-8.7-1230&930/9.5-6.4-770&660/6.5-4.5-915&545/18-12-100&200 The tubes of the above sizes , we have available stocks. We can also custom cut shorter lengths to your specifications. Other sizes available on request. Application Zirconia ceramic thermocouple-protection tubes can be for primary and secondary protection tubes on noble metal (platinum based) thermocouples. Other information In addition, timely delivery, stocks and product information are available. Should you have any questions, pls do not hesitate to contact me. Free samples will be sent for your evaluation! Note:if we have available stocks for your sizes, free samples can be sent to you but you bear the freight. If your sample is custom-made, you should pay for both the sample fee and freight.
KOHS CERAMICS, which is a professional manufacturer of advanced ceramics with 19 years of R&D experience.we can custom various textile ceramics,alumina ceramic tubes,crucible and so on.If you are interested pls contact
