Cenospheres (aluminosilicate microspheres) are hollow aluminosilicate glass ceramic beads ranging in size from 400-500 microns 20-50mkm (most often from 100 to 250 microns), which are formed during high-temperature combustion of pulverized coal. The chemical composition of the main component of the cenospheres is silicon oxide SiO2 (45-60%), aluminium oxide Al2O3 (15-40%), iron oxide Fe2O3 (1.0-10%), calcium oxide CaO (1.5- 4.5%), potassium oxide K2O (2.0-4.5%) and other certain oxides that make up the balance of the content are typically less than 1.0%. Due to the unique set of physical and chemical characteristics of the cenospheres, they are used in the manufacturing of various composite materials. They are used in solving technical issues that require: reduction in the weight material with a low thermal conductivity, high strength, volume efficiency, increased resistance to erosion and aggressive environments.
We deals in the following Chemicals :- Alumina Silica ( Cenosphere ) Powder Fly Ash Powder Ilmenite (Synthetic Rutile) Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Barite Powder, Barite Ore Dolomite Powder Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay Calcium Carbonate Powder Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells
We are an innovative and value driven company in the business of Building Products, Chemicals & Minerals. It is further classified in the below table: 1. Fly Ash 2. Caustic Soda Flakes 3. GGBFS 4. Cenosphere Recons Group is the synonym of quality for the last 24 years supplying diversified building products, Chemicals & Minerals all across the country and abroad. Our company has over the years developed a robust network & very strong clientele list in Middle East & African countries.
Cenosphere.
Cenosphere: A cenosphere is a lightweight, inert, hollow sphere comprised largely of silica and alumina and filled with air and/or gases. Cenospheres are a naturally occurring by-product of the burning process at coal-fired power plants, and they have most of the same properties as manufactured hollow-sphered products. Typical Properties of Cenospheres SiO2: 52 - 62% Al2O3: 32 - 36% K2O: 1.2 - 3.2% Fe2O3: 1 - 2% TiO2: 0.8 - 1.3% MgO: 1 - 2.5% Na20: 0.2 - 0.6% CAO: 0.1 - 0.5%
CENOSPHERE A cenosphere is a lightweight, inert, hollow sphere comprised largely of silica and alumina and filled with air and/or gases. Cenospheres are a naturally occurring by-product of the burning process at coal-fired power plants, and they have most of the same properties as manufactured hollow-sphered products. Typical Properties of Cenospheres SiO2 52 - 62% Al2O3 32 - 36% K2O 1.2 - 3.2% Fe2O3 1 - 2% TiO2 0.8 - 1.3% MgO 1 - 2.5% Na20 0.2 - 0.6% CAO 0.1 - 0.5% Physical Properties Specific Gravity(g/cc) 0.65 - 0.75 Bulk Density(Kg/M3) 350 - 450 Hardness(Moh's) 5 - 6 Compressive Strength(Kg/cm2) 180 - 280 Shape Spherical Color Light Grey Light Buff Melting Point 1350C pH in water 6 - 7 Moisture 0.5% Max Sinkers 3% Max Oil Absorption 16-18 G/100G What Are The Advantages of Using Cenospheres? Manufacturing Benefits: The spherical shape of Cenospheres improves flowability in most applications and provides a more even distribution of the filler material. The natural properties of Cenospheres make it possible to use them either in dry or wet slurry form. Cenospheres are easy to handle and provide a low surface area-to-volume ratio. Due to their inert properties, they are not affected by solvents, water, acids, or alkalis. Cenospheres are 75% lighter than other minerals currently used as a filler or extender and are 30 percent lighter than most resins. Lowered Cost: Utilization of Cenospheres reduces the cost of manufacturers' raw materials. The savings may be recognized in one or more of the following benefits: Reduced Raw Materials Cost Improved Flowability Reduced Resin Demand Improved Insulation Values Resistant to Resin Absorption Reduced End Product Weight
General information: Physical & chemical properties - cenosphere cs-300 Size 1-500 microns Ph in water 6.0 - 8.0 Bulk density 400-450 kgs/cbm Compressive strength 1500 - 3000 psi Melting point > 1200 degrees celsius Shape spherical Moisture 0.5% max Specific gravity 0.75-0.85 g/cc Sinkers 5% max Sio2 55-65% Al2o3 30-36% Cao 0.1-0.5% K2o 1.2-3.2% Fe2o3 1.0-3.0% Tio2 0.8-1.3% Mgo 1.0-2.5% Na2o 0.2-0.6% 25kg
Khetan group is manufacturer and global supplier of processed cenosphere .We manufacture clean and graded cenosphere which have high compressive strength.The true density consistency will always give the result as expected.Our cenosphere provide all the benefits which are same as microsphere and can improve the properties and performance of many formulated products.
Size 0-550 microns (30mesh) Bulk density 0.3-0.5g/cm©ø True density 0.90-0.95g/cm©ø Compressive strength 28mpa min Moisture 0.5% max Floating rate 95% min by volume Specific density: 0.90-0.95g/cc Appearance grey/white powder Mosh scale 5-7 Ph 6 Coefficient of heat conductivity 0.054-0.095w/m.K Refractive index 1.54 Melting point 1400¡é min Loss on ignition at 1000¡é < 3% Refractoriness 1550-1750¡é 25kg/pp bag
After they are harvested, they get dried and screened. 500kg polythene bag
Cenosphere.
Cenospheres Jumbo Bags 500 - 600 kgs
A cenosphere is a lightweight, inert, hollow sphere made largely of silica and alumina and filled with air or inert gas, typically produced as a coal combustion byproduct at thermal power plants.
Cenospheres 0-500 um
We have Wet Ash Fly Cenosphere in large quantity 16kg bags
A cenosphere is a lightweight, inert, hollow sphere made largely of silica and alumina and filled with air or inert gas.typically produced as a byproduct of coal combustion at thermal power plants. Cenospheres are unique free flowing powders composed of hard shelled, hollow, minute spheres. A small proportion of the pulverised fuel ash (PFA) produced from the combustion of coal in power stations is formed as Cenospheres. Cenospheres are made up of silica, iron and alumina. Cenospheres have a size range from 1 to 500 microns with an average compressive strength of 3000+ psi. Colors range from white to dark gray. They are also referred to as microspheres, hollow spheres, hollow ceramic microspheres, micro balloons, or glass beads. 25 kg,40 kg,50 kg and 500 kg and more.
0.80 to 0.85 MAX: Physical properties: Particle Size (um) : 5-500 microns Particle Density (g/cm3) : 0.80-.85 g/cc Bulk Density : g/cm3 : 0.35-0.48 g/cc Moisture :
Cenosphere Cenosphere China Cenosphere Supplier Product Details Cenosphere sometimes called microsphere, is a light weight, inert, hollow sphere made largely of silica and alumina and filled with air or inert gas, typically produced as a byproduct of coal combustion at thermal power plants. The color varies from gray to almost white and their density is about 0.60.9 g/cm³, all these property give it a widely application for insulation, refractory, oil drilling, coating, construction use - .
Ashes (Residues), Cenospheres(CAS:93924-19-7)
Ashes (residues), cenospheres(CAS:93924-19-7) Ashes (residues), cenospheres 93924-19-7