CC-403 Epilox Epoxy Binder is a two part solvent free epoxy resin binder system for combining with selected fillers and aggregate to produce epoxy mortars of various consistencies. Ideal for : bonding, sealing, priming, coating and grouting. May be used on vertical or horizontal applications as structural epoxy adhesive paste and filler. CC-403 is also used as a primer for Epilox floor coatings and toppings as well as Epilox mortars.
FEATURES AND BENEFITS
100% solids epoxy
Solvent free
Low VOC
High tensile and compressive strength
Bonds to damp concrete
High mechanical strength
Excellent adhesion to most substrates
Cures at temperature down to 5Ã??C
High chemical resistance
Unfilled system
Allows for mortars and grouts to be mixed to any desirable consistency
Typically 3-4 times stronger than typical concrete
Complies with AS4020 potable water
Australian Made
Convenient mix ratio- ( 2 parts Resin- 1 part Hardener ).
Physical property:
Melting Temperature: -49 ºC
Boiling Temperature: 240-243 ºC
Density at 20ºC, g/cm3 : 1.204
Flash Point: 123 ºC
Ignition Temperature: 455 ºC
Packaging Details
250kg drum;1200kg/IBC; 23-24MT ISO TANK
Application:
1. Reactive diluents for urethane and epoxy resins
2. Cleaner and degreasers
3. Chemical intermediates
4. Cosmetics additives
5. Electronic industry(media) as filler
6. Paint stripper
7. Foundry sand binder, wood binding resins
8. Coal mining ,excavation and tunneling
9. Removal of CO2 from Urea manufacturing, oil gas, natural gas etc
10. Setting agent in chemical grouting to get easily controlled gel time
Hydroxyethyl methacrylate is a functional monomer used to prepare emulsion modifier of styrene-butadiene rubber for thermosetting acrylic coatings. Acrylic modified polyurethane coating, water-soluble electroplating coating binder, fiber finishing agent, paper coating, photosensitive coating and polyvinyl chloride resin modifier used in various resins, widely used.
Application:
1. In plastic industry, it is used for the production of acr ylic acid resin.
2. In coating industry, it can be used for the production of double-component coating with epoxy resin, diisocyanate, melamino-formaldehyde resin. In oil industry, it can be used as additive for cleaning of lubricant.
3. In electronic industry, used as dehydrating agent of electron microscope.
4. In textile industry, as the adhesive for the production of fabric. In analytical chemistry, as chemical reagent.
5. In addition, it can also be used for fiber treatment agent, adhesive, photosensitive resin, medical macromolecular material,etc.
Monosodium Phosphate Anhydrous also known as Sodium Dihydrogen Phosphate and Monosodium Dihydrogen Orthophosphate, is a high buffering capacity reagent, also has the sequestrant, emulsifier and mordant properties. It is used to control pH and in industrials applications, it is used as a fireproofing agent, buffering agent, supplement for animal feed. It is employed to prepare different buffer solutions, detergents, ceramics, enamels, and boiler products. It is also used in brazing/soldering, to treat boiler water/wastewater, and to acidify urine. Monosodium Phosphate Food Grade is mainly used as used as a buffer and acidity regulator in food, as a Leavening acid in baking powder and a binder and curing agent for bread and sauce. It's used as a pH buffer, stabilizer, and emulsifier in processed cheese, condensed milk, instant pudding, and other food applications.
Monosodium Phosphate Anhydrous MSP (Sodium Dihydrogen Phosphate) FCC
WC Code: 13-028-02
Sales Specification
pH(1% Solution): 4.4 4.6
Bulk Density gm/cc: 0.60 min.
Moisture (at 110 Deg C for 4 hr) %: 1.5 max.
Water Insoluble %: 0.1 max.
Phosphate as ( P2O5) %: 58.0 59.5
Assay %: 98.0 min.
Fluoride as F ppm: 10.0 max.
Arsenic as As ppm: 2.0 max.
Lead as Pb ppm: 2.0 max.
Cadmium as Cd ppm: 1.0 max.
Mercury as Hg ppm: 1.0 max
Packing
HBI is the preferred DRI product for the merchant metallic market; Because it is much denser than CDRI, which reduces the re-oxidation rate. In fact this enables HBI to be stored and transported without special precautions under the International Maritime Organization (IMO) code for shipping solid bulk cargoes. Besides we can use it the EAF, BF, and BOF.
Consequently, HBI which is the product of compressing DRI discharged from the MIDRE Shaft Furnace at 650 C into pillow-shaped briquettes; with a typical size of 30 x 50 x 110 mm and a density 5 gm/cc. No binder is used to make HBI.
78 Cc 403 Epilox Epoxy Binder Suppliers
Short on time? Let Cc 403 Epilox Epoxy Binder sellers contact you.
DESCRIPTION
CC-200 is a indoor, high fluidity, rapid strength and leveling material.
It still has high bonding,low shrinkage, low water absorption, acid resistance,
alkyl resistance and chemical resistance. It special use for fast repairing, putty and leveling for epoxy coating.
APPLICATION
Floor fixing on parking garage, factory, and warehouse.
Leveling before epoxy coating.
Basic layer for non natural paint.
Bec ause of the early strength and low moisture content, CC 200 has widely application.
Contact out agent when you have doubt on CC 200.
ADVANTAGES
1. Curing and enhancing are fast and rapid below 25 mins.
High strength and low water
absorption/ content could be reached after curing.
2. Good acid and alkyl resistance.
3. Good wear resistance, high compressive strength, leveling and anti cracking.
PREPARE TO USE
1. Clean with vacuum to ensure the surface dustless.
2. Working site is free from dust, sand, oil, and loose.
a). Crack and Joint Treatment
b). File on the crack, open a width of 2 3 cm depth of 1 cm or more groove joints and
clean up dust and loose.
c). At the same time taking CC 200 mortar, filled in and up the crack and sizing 1 2 times
primer after 2 4 hours.
4. Shorter wor king hours to achieve saving time, fast leveling and convenience work.
Description
1. Tough film and good adhesion on the concrete, able to penetrate into concrete.
2. Good resistance to water , brine and chemicals. Excellent mechanical strength and physical properties.
3. Good resistance to impact and abrasion.
4. Easy application , drying fast.
Prepare to use
1. Mix base and hardener by the mixing ratio and Stir thoroughly, then setting at least 15 minutes. Thinner may be used to reduce viscosity.
2. Remove all foreign particles, oils, grease , rust and moistures from the surface before application.
3. Two packs product, must be used completely during the duration of its pot life.
4. Donâ??t apply when the temperature is < 10â??,>40â??, relative humidity is >90â?? or the surface temperature of substrate is not higher than the dew point for at least 3â??.
5. If the coating interval is exceeded , the surface of base coat must be roughened to insure adhesion.
6. Keep away from heat, sparks and flame.
7. Stored with good ventilation.
8. Keep adequate ventilation during application.
9. The actual coverage may vary, depending on application technique, job conditions and type of surface. Under brushing & rolling application the actual coverage is estimated at 70% of the Theoretical coverage and 60% for spraying.
**The parts of data base above could be affect by application condition at job site, please reference guide specification or contact with relative technical personnel.
Color : Clear
Drying time :
Tack-free : 2 hours
Hardness : 8 hours
Full cure : 7 days (grease)
DESCRIPTION
CC-600SP is a two component, solvent-free epoxy system with high chemical
resistance and high bond strength. The epoxy may be applied as a primer for most
high end industrial coatings, like Epoxies, PU.
CHARATERISTIC
Easy apply
Low odor
High bond strength
Abrasion resistant
Chemical resistant
DESCRIPTION
CC-601SP is a two component, Epoxy system with High Chemical Resistance and
High Bond Strength. The epoxy may be applied as a primer for most High End
Industrial coatings, like Epoxies, PU.
CHARATERISTIC
* Easy apply
* Low odor
* High bond strength
* Abrasion resistant
* Chemical resistant
DESCRIPTION
CC-604SP is two component water based epoxy primer, composed from water based of liquid epoxy resin and hardener.
APPLICATION
1. To prime the surface and help the following application procedure to mold and decorative coating.
2. Highly resist to chemicals in non-circulated places.
3. With well adhesion ability with epoxy system or PU system application.
4. Suitable for hospital, operation room, food factory to prevent the mold, dust and bacterium.
CHARATERISTIC
1. Able to be diluted by water.
2. Anti- efflorescence , suitable for the environment with highly hygienic request.
3. Good adhesion to the moisture surface, can take as the primer for solvent-free or solvent-based epoxy resin.
They have extremely high mechanical & electrical strength. Good dielectric properties under dry and humid conditions. Excellent rigidity and dimensional stability.
G10/fr4 temperature index: 140 degree celsius
G11 temperature index: 155 / 180 degree celsius
Prominently catering to the needs of decorative floorings and countertops industry. These stones or aggregates have very good compatibility with a variety of commonly used resins and binders like epoxy, Polyurethane, Acrylics, Cement, Polyester etc. The aggregates come in various naturally occurring colours like black, grey, white, yellow, red, green, etc.
three component self smoothing toppings, which consist of a
graded filler in epoxy binder.
TYPICAL USES
used in industrial and commercial situations to provide long lasting finishes in
particular where an impervious, abrasion resistant and easy to clean floor is required.
The thermal insulation of the furnace pots is essential. It is important that the tamping Paste does not have any excess binder and fills the wall of the furnace, maintaining proper insulation & minimizing the heat loss.
Specification
Green Paste:
A) V.M. : 12-14%
B) Plasticity : 10-15%
C) F.C. : 86% MIN
D) Ash : 1% MAX
E) Apparent Density: 1.58gm/cc.
Baked Paste:
A) F.C. : 99% MIN
B) Porosity : 22-24%
C) Apparent Density : 1.36gm/cc
D) Electrical
Resistivity : 80 ohms/mm2/m
E) CCS : 250 Kg. /Cm2.
Plastic-bonded magnets are particle composites with permanent-magnet powder embedded in a plastic binder. Hard ferrite (HF), various SmCo and NdFeB powders and, to a very little extent, AINiCo alloys are used as magnetic powder. For embedding the magnetic particles, thermoplastic binders as, for instance, polyamide (PA) or polyphenyl sulfide (PPS) and duroplasts like epoxy resins are used. Depending on the material composition and production process, isotropic and anisotropic magnets with differing magnetic and mechanical specifications are available. Since not only the type of magnet or plastic material, but the filling and alignment degree, too, determine the composite`s properties, the outcome is widely varying magnetic parameters and an outstanding variety in types and shapes.
FR4/G10 sheet is made of alkali-free E-glass cloth impregnated with epoxy resins by processing under heat and pressure.
It is a thermosetting industrial laminate consisting of continous filament glass cloth with an epoxy resin binder.
Grade FR-4/G10 laminates sheet is with high mechanical strength at room temperature, good electrical properties under dry and humidity conditions. It is flame retardant.
Application : in electrical motor ,insulation mounting of electrical apparatus.working in high humidity and transformer oil.
Normal size:1020mm*1220mm/1220mm*2440mm/1000mm*2000mm
Thickness:1mm~150mm
Colour:black,green
Natural Mica Washers are circular punched and stamped natural mica parts with round openings in the center suitable for electrical and electronic applications. Such natural mica washers can also be bonded into considerable lengths with shellac, epoxy or silicone binders to form a solid roll which is then called Bonded Mica Washers. Maximum use is in railways and grid resistors. Based on customer specifications, Mica washers can be punched, stamped and/or machined into different sizes, shapes and thickness for various temperature ranges
Product Description:
Chemical Name: 3-Glycidoxypropyltrimethoxysilane
CAS NO. : 2530-83-8
Against other brands: Einecs#:219-784-2
Silquest A-187*
Dow Corning:Z-6040/OFS-6040
ShinEtsu: KBM-403
Degussa: Dynasylan Glymo
Wacker: Geniosil GF 80.
Specifications:
Appearance : Colorless transparent liquid
Color (Pt-Co): 25
Specific Gravity20C, g/cm3 1.060 1.075
Refractive Index : 1.4275 1.4300
Purity% : at least 97.0
Applications:
1. As epoxy coupling agent, it is used in polysulfide-based and metal-filled epoxide resinous material.
2. Improve the adhesion between inorganic stuffing, substrate material and resin, accordingly improve electrical property of electronic material which is made of epoxy resin and wrappage.
3. It can be widely used in multi-fillers and substrates such as clay, talcum, tricalcium silicate, silica, quartz, aluminum, copper and iron. Including quartz-filled epoxy sealants, grail-filled epoxy resin and concrete patching material or coating, toner of modeling kits, and improving the dispersivity, fluidity of adhesive.
4. To avoid the need of independent primer in polysulfide and polyurethane sealant and sealing compounds.
5. Improve the adhesion of double-component epoxy sealing agent, It is used in polyurethane adhesive and sealant, epoxy resin adhesives, enhanced thermosetting resin, glass fiber adhesive, thermoplastic resin for inorganic filler or glass reinforcement.
25 kg, 200kg plastic or iron drum.
78 Cc 403 Epilox Epoxy Binder Suppliers
Short on time? Let Cc 403 Epilox Epoxy Binder sellers contact you.
